Market Overview:
The global flexographic printing presses market is expected to grow at a CAGR of 5.5% during the forecast period from 2018 to 2030. The growth in this market can be attributed to the increasing demand for packaging and labeling products, especially in emerging economies. In terms of type, the stacked type segment is expected to lead the global flexographic printing presses market during the forecast period, followed by satellites type and unit type segments. The paper segment is expected to account for a major share of the global flexographic printing presses market during the forecast period, followed by plastic and metallic segments.
Product Definition:
A flexographic printing press is a type of printing press that uses rubber or flexible plates to print on a variety of surfaces. Flexographic printing presses are often used to print labels and packaging, as the flexible plates can easily conform to curved surfaces. The use of flexographic printing presses is important because they can produce high-quality prints quickly and at a low cost.
Stacked Type:
Stacked type is a method of printing where the type is printed in a series or line upon the printing surface. The earliest example of stacked types can be found in an engraving from 1477, which depicts St. Mark's Basilica in Venice, Italy.
Satellites Type:
A satellite is a device that emits and receives signals from Earth. These signals are received by antennae which are attached to the machine or devices. The type of satellites used in flexographic printing presses can be classified into three categories, namely, artificial satellite, communication satellite and space probe. Artificial satellites emit their signal towards the earth’s surface and they can be used for television as well as radio transmissions.
Application Insights:
Paper application segment led the market and accounted for more than 55.0% share of the global revenue in 2017. The product is widely used to produce various paper grades including B1, B2, C1, and other specialty papers. In addition to being one of the most cost-effective solutions available in flexography printing press market, paper is also among one of the most preferred materials when it comes to flexographic printing presses due to its high quality and brightness as compared with other conventional technologies such as gravure or letterpress printers.
The plastic application segment is expected witness significant growth over the forecast period owing to rising demand from packaging industry for producing high-quality products with enhanced durability at competitive prices while maintaining environmental sensitivity required by modern society.
Regional Analysis:
Asia Pacific was the largest regional market in 2017 and will expand further at a steady CAGR from 2018 to 2030 owing to growing industrialization, rapid urbanization, and increasing population. The region is home to several emerging economies including China, India, Indonesia among others. These countries are expected to witness strong economic growth over the coming years which is likely to boost product demand in flexographic printing presses over the forecast period.
Europe accounted for more than 25% of global revenue share in 2017 on account of high product penetration due to early adoption by leading companies such as Volkswagen Group and BMW AG along with presence of major manufacturers such as Heidelberg Printing Machine GmbH & Co., Ltd., IHCAS Verlagsservice GmbH & Co., FLEXIMA S.p.A., etc.
Growth Factors:
- Increasing demand for printed products from the packaging and labeling industry
- Proliferation of digital printing technologies that offer flexibility and faster turnaround times
- Growing popularity of flexographic printing among small businesses due to its affordability
- Rising demand for customized print solutions in the publishing, advertising, and marketing industries
- Emergence of new applications for flexographic printing in fields such as textile printing and medical device manufacturing
Scope Of The Report
Report Attributes
Report Details
Report Title
Flexographic Printing Presses Market Research Report
By Type
Stacked Type, Satellites Type, Unit Type
By Application
Paper, Plastic, Metallic, Others
By Companies
SOMA Engineering, BFM srl, BOBST, Chyi Yang Industrial Co., Ltd, Comexi Group Industries, Filippini & Paganini S.r.l., Giugni S.r.l, SALDOFLEX, Uteco, Windmoeller & Hoelscher Corporation, SOMA Engineering, Siemens AG
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
185
Number of Tables & Figures
130
Customization Available
Yes, the report can be customized as per your need.
Global Flexographic Printing Presses Market Report Segments:
The global Flexographic Printing Presses market is segmented on the basis of:
Types
Stacked Type, Satellites Type, Unit Type
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Paper, Plastic, Metallic, Others
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- SOMA Engineering
- BFM srl
- BOBST
- Chyi Yang Industrial Co., Ltd
- Comexi Group Industries
- Filippini & Paganini S.r.l.
- Giugni S.r.l
- SALDOFLEX
- Uteco
- Windmoeller & Hoelscher Corporation
- SOMA Engineering
- Siemens AG
Highlights of The Flexographic Printing Presses Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- Stacked Type
- Satellites Type
- Unit Type
- By Application:
- Paper
- Plastic
- Metallic
- Others
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Flexographic Printing Presses Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
Flexographic printing presses are used to print large quantities of leaflets, brochures, posters and other printed materials using a variety of inks. These presses can be used for both digital and offset printing.
Some of the key players operating in the flexographic printing presses market are SOMA Engineering, BFM srl, BOBST, Chyi Yang Industrial Co., Ltd, Comexi Group Industries, Filippini & Paganini S.r.l., Giugni S.r.l, SALDOFLEX, Uteco, Windmoeller & Hoelscher Corporation, SOMA Engineering, Siemens AG.
The flexographic printing presses market is expected to grow at a compound annual growth rate of 5.5%.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Flexographic Printing Presses Market Overview 4.1 Introduction 4.1.1 Market Taxonomy 4.1.2 Market Definition 4.1.3 Macro-Economic Factors Impacting the Market Growth 4.2 Flexographic Printing Presses Market Dynamics 4.2.1 Market Drivers 4.2.2 Market Restraints 4.2.3 Market Opportunity 4.3 Flexographic Printing Presses Market - Supply Chain Analysis 4.3.1 List of Key Suppliers 4.3.2 List of Key Distributors 4.3.3 List of Key Consumers 4.4 Key Forces Shaping the Flexographic Printing Presses Market 4.4.1 Bargaining Power of Suppliers 4.4.2 Bargaining Power of Buyers 4.4.3 Threat of Substitution 4.4.4 Threat of New Entrants 4.4.5 Competitive Rivalry 4.5 Global Flexographic Printing Presses Market Size & Forecast, 2020-2028 4.5.1 Flexographic Printing Presses Market Size and Y-o-Y Growth 4.5.2 Flexographic Printing Presses Market Absolute $ Opportunity
Chapter 5 Global Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Market Size Forecast by Type
5.2.1 Stacked Type
5.2.2 Satellites Type
5.2.3 Unit Type
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Market Size Forecast by Applications
6.2.1 Paper
6.2.2 Plastic
6.2.3 Metallic
6.2.4 Others
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Flexographic Printing Presses Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Flexographic Printing Presses Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Analysis and Forecast
9.1 Introduction
9.2 North America Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Market Size Forecast by Type
9.6.1 Stacked Type
9.6.2 Satellites Type
9.6.3 Unit Type
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Market Size Forecast by Applications
9.10.1 Paper
9.10.2 Plastic
9.10.3 Metallic
9.10.4 Others
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Analysis and Forecast
10.1 Introduction
10.2 Europe Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Market Size Forecast by Type
10.6.1 Stacked Type
10.6.2 Satellites Type
10.6.3 Unit Type
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Market Size Forecast by Applications
10.10.1 Paper
10.10.2 Plastic
10.10.3 Metallic
10.10.4 Others
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Market Size Forecast by Type
11.6.1 Stacked Type
11.6.2 Satellites Type
11.6.3 Unit Type
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Market Size Forecast by Applications
11.10.1 Paper
11.10.2 Plastic
11.10.3 Metallic
11.10.4 Others
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Analysis and Forecast
12.1 Introduction
12.2 Latin America Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Market Size Forecast by Type
12.6.1 Stacked Type
12.6.2 Satellites Type
12.6.3 Unit Type
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Market Size Forecast by Applications
12.10.1 Paper
12.10.2 Plastic
12.10.3 Metallic
12.10.4 Others
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Market Size Forecast by Type
13.6.1 Stacked Type
13.6.2 Satellites Type
13.6.3 Unit Type
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Market Size Forecast by Applications
13.10.1 Paper
13.10.2 Plastic
13.10.3 Metallic
13.10.4 Others
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Flexographic Printing Presses Market: Competitive Dashboard
14.2 Global Flexographic Printing Presses Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 SOMA Engineering
14.3.2 BFM srl
14.3.3 BOBST
14.3.4 Chyi Yang Industrial Co., Ltd
14.3.5 Comexi Group Industries
14.3.6 Filippini & Paganini S.r.l.
14.3.7 Giugni S.r.l
14.3.8 SALDOFLEX
14.3.9 Uteco
14.3.10 Windmoeller & Hoelscher Corporation
14.3.11 SOMA Engineering
14.3.12 Siemens AG