Market Overview:
The global HDPE pipe for oil and gas market is expected to grow at a CAGR of 5.5% from 2018 to 2030. The growth in the market can be attributed to the increasing demand for HDPE pipes from the oil and gas industry, especially in developing countries. In terms of type, PE80 is expected to dominate the market during the forecast period, followed by PE100 and others. In terms of application, offshore pipeline is expected to hold a major share of the market during the forecast period, followed by onshore pipeline.
Product Definition:
HDPE pipe is a high-density polyethylene pipe used for transporting oil and gas. It is important for oil and gas because it can carry large amounts of fluid while being resistant to corrosion and degradation.
PE80:
PE80 is a kind of high-density polyethylene used in the manufacturing of HDPE pipe for oil & gas industry. It has properties such as low thermal conductivity, good chemical resistance and excellent mechanical strength. PE80 has replaced earlier versions in the past few years owing to its superior properties which include higher impact resistance and lower cost compared to other alternatives including EPDM rubber and PVC piping systems.
PE100:
The PE100 is a type of plastic that can be used as an alternative to HDPE pipe for oil and gas applications. It has better flow characteristics than HDPE pipes, which makes it ideal for the transportation of fluids in the oil and gas industry. The material also offers high impact resistance, making it suitable to be used in corrosive environments.
Application Insights:
Based on application, the market has been segmented into offshore pipeline, onshore pipeline and others. The offshore segment dominated the overall industry in terms of revenue in 2017. High demand for oil & gas from remote locations coupled with extensive use as a subsea connector is expected to be a key factor driving product demand over the forecast period.
The PE80 HDPE pipe is most commonly used for oil & gas applications owing to its ability to resist corrosion and wear caused by high-pressure hydrocarbons without suffering any damage or leaks along the pipelines journey.
Regional Analysis:
Asia Pacific was the dominant regional market in 2017 and accounted for over 40% of the overall revenue share. The region is expected to witness significant growth in terms of demand as China has emerged as a major consumer of HDPE pipes. Rapid infrastructural development coupled with rising energy consumption due to industrialization, urbanization and strong economic growth is anticipated to drive product demand over the forecast period.
North America market was valued at USD X million in 2017 owing to increasing shale gas production mainly from U.S., which resulted into increased utilization of plastic pipes for oil & gas industry applications including offshore pipeline systems, thereby boosting product sales across this region.
Growth Factors:
- Increasing demand for oil and gas due to population growth and industrialization
- Rising investments in oil and gas infrastructure
- Stringent environmental regulations for wastewater management
- Technological advancements in HDPE pipe manufacturing process
- Growing popularity of trenchless technology
Scope Of The Report
Report Attributes
Report Details
Report Title
HDPE Pipe for Oil & Gas Market Research Report
By Type
PE80, PE100, Others
By Application
Offshore Pipeline, Onshore Pipeline
By Companies
JM Eagle, ADS, Aliaxis, Chevron Phillips Chemical, WL Plastics, Cangzhou Mingzhu, Dura-Line, POLYPLASTIC Group, Pipelife International, Prinsco, Contech Engineered Solutions
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
231
Number of Tables & Figures
162
Customization Available
Yes, the report can be customized as per your need.
Global HDPE Pipe for Oil & Gas Market Report Segments:
The global HDPE Pipe for Oil & Gas market is segmented on the basis of:
Types
PE80, PE100, Others
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Offshore Pipeline, Onshore Pipeline
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- JM Eagle
- ADS
- Aliaxis
- Chevron Phillips Chemical
- WL Plastics
- Cangzhou Mingzhu
- Dura-Line
- POLYPLASTIC Group
- Pipelife International
- Prinsco
- Contech Engineered Solutions
Highlights of The HDPE Pipe for Oil & Gas Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- PE80
- PE100
- Others
- By Application:
- Offshore Pipeline
- Onshore Pipeline
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the HDPE Pipe for Oil & Gas Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
HDPE pipe is most commonly used for oil and gas pipelines. It is a type of plastic that has high resistance to corrosion and is lightweight. This makes it ideal for long-distance pipelines.
Some of the major players in the hdpe pipe for oil & gas market are JM Eagle, ADS, Aliaxis, Chevron Phillips Chemical, WL Plastics, Cangzhou Mingzhu, Dura-Line, POLYPLASTIC Group, Pipelife International, Prinsco, Contech Engineered Solutions.
The hdpe pipe for oil & gas market is expected to register a CAGR of 5.5%.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 HDPE Pipe for Oil & Gas Market Overview
4.1 Introduction
4.1.1 Market Taxonomy
4.1.2 Market Definition
4.1.3 Macro-Economic Factors Impacting the Market Growth
4.2 HDPE Pipe for Oil & Gas Market Dynamics
4.2.1 Market Drivers
4.2.2 Market Restraints
4.2.3 Market Opportunity
4.3 HDPE Pipe for Oil & Gas Market - Supply Chain Analysis
4.3.1 List of Key Suppliers
4.3.2 List of Key Distributors
4.3.3 List of Key Consumers
4.4 Key Forces Shaping the HDPE Pipe for Oil & Gas Market
4.4.1 Bargaining Power of Suppliers
4.4.2 Bargaining Power of Buyers
4.4.3 Threat of Substitution
4.4.4 Threat of New Entrants
4.4.5 Competitive Rivalry
4.5 Global HDPE Pipe for Oil & Gas Market Size & Forecast, 2020-2028
4.5.1 HDPE Pipe for Oil & Gas Market Size and Y-o-Y Growth
4.5.2 HDPE Pipe for Oil & Gas Market Absolute $ Opportunity
Chapter 5 Global Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Market Size Forecast by Type
5.2.1 PE80
5.2.2 PE100
5.2.3 Others
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Market Size Forecast by Applications
6.2.1 Offshore Pipeline
6.2.2 Onshore Pipeline
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global HDPE Pipe for Oil & Gas Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 HDPE Pipe for Oil & Gas Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Analysis and Forecast
9.1 Introduction
9.2 North America Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Market Size Forecast by Type
9.6.1 PE80
9.6.2 PE100
9.6.3 Others
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Market Size Forecast by Applications
9.10.1 Offshore Pipeline
9.10.2 Onshore Pipeline
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Analysis and Forecast
10.1 Introduction
10.2 Europe Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Market Size Forecast by Type
10.6.1 PE80
10.6.2 PE100
10.6.3 Others
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Market Size Forecast by Applications
10.10.1 Offshore Pipeline
10.10.2 Onshore Pipeline
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Market Size Forecast by Type
11.6.1 PE80
11.6.2 PE100
11.6.3 Others
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Market Size Forecast by Applications
11.10.1 Offshore Pipeline
11.10.2 Onshore Pipeline
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Analysis and Forecast
12.1 Introduction
12.2 Latin America Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Market Size Forecast by Type
12.6.1 PE80
12.6.2 PE100
12.6.3 Others
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Market Size Forecast by Applications
12.10.1 Offshore Pipeline
12.10.2 Onshore Pipeline
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Market Size Forecast by Type
13.6.1 PE80
13.6.2 PE100
13.6.3 Others
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Market Size Forecast by Applications
13.10.1 Offshore Pipeline
13.10.2 Onshore Pipeline
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 HDPE Pipe for Oil & Gas Market: Competitive Dashboard
14.2 Global HDPE Pipe for Oil & Gas Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 JM Eagle
14.3.2 ADS
14.3.3 Aliaxis
14.3.4 Chevron Phillips Chemical
14.3.5 WL Plastics
14.3.6 Cangzhou Mingzhu
14.3.7 Dura-Line
14.3.8 POLYPLASTIC Group
14.3.9 Pipelife International
14.3.10 Prinsco
14.3.11 Contech Engineered Solutions
