Market Overview:
The global industrial X-ray inspection equipment and imaging software market is expected to grow at a CAGR of 6.5% during the forecast period from 2018 to 2030. The growth in this market can be attributed to the increasing demand for advanced inspection technologies across various industries, such as aerospace, food industry, construction, oil and gas, automotive and manufacturing, energy and power semiconductor and electronics. In addition, the growing demand for computed tomography (CT) scanners for 3D imaging is also contributing to the growth of this market.
Product Definition:
Industrial x-ray inspection equipment is a type of machinery used to inspect objects for defects or foreign materials. Imaging software is used to create images of the inspected object that can be analyzed for potential problems. Industrial x-ray inspection equipment and imaging software are important because they allow manufacturers to identify and correct defects in products before they leave the factory, reducing the number of defective products that reach consumers.
Film Radiography:
Film radiography is a traditional method of X-ray imaging. It was the first technology to provide high-quality images and has been used by medical practitioners for over 80 years. The technique is based on the fact that film or paper exposed to X-rays will fluoresce (glow) if there are any objects in them.
The growth factor in this market includes factors such as increasing demand for early disease detection, technological advancements,.
Computed Radiography:
Computed radiography is a digital imaging process that helps to reduce the exposure to radiation by using multiple images taken at different angles and then combined into a single image. The computed radiography system uses X-ray film or an electronic sensor for capturing the image. This reduces the amount of radiation which is equivalent to approximately 50% of traditional X-ray films.
Application Insights:
The global demand for industrial x-ray inspection equipment and software is categorized on the basis of application into aerospace, food industry, construction, oil & gas, automotive and manufacturing, energy and power sector. The automotive and manufacturing segment dominated the market in 2017 owing to increasing product adoption by major players such as Toyota Motor Corporation.
Industrial x-rays are widely used in various applications such as preclinical imaging studies for drug discovery & development; quality control; material characterization; process monitoring & control within the automobile industry including body structure assembly line testing; component testing (e.g., tires); emission analysis (e.g.
Regional Analysis:
Asia Pacific dominated the global market in 2017 and is expected to maintain its position over the forecast period. The growth can be attributed to increasing investments by governments in infrastructure development, rising healthcare spending, and growing industrialization across emerging economies of China, India, Malaysia, Vietnam among others.
The demand for computed radiography systems is high in this region due to presence of a large number of medical facilities coupled with favorable government initiatives pertaining to reduction in diagnosis time and cost associated with hospital stays along with improved patient outcomes. In addition X-ray film based systems are also being replaced by digital imaging techniques owing to advantages such as faster image acquisition speed resulting into better patient care services delivery at lower costs which will drive the regional market further.
Europe accounted for a significant share followed by North America owing both these regions together account for more than 50% of global production volume every year thus making them major contributors towards industry growth worldwide.
Growth Factors:
- Increasing demand for industrial x-ray inspection equipment and imaging software in the automotive, aerospace, and defense industries due to the growing need for quality control and product safety.
- The increasing use of 3D printing technology in manufacturing is expected to drive the growth of the industrial x-ray inspection equipment market over the next few years.
- Growing awareness about product safety among consumers is also expected to boost demand for industrial x-ray inspection equipment and imaging software in coming years.
- Rising investments by governments worldwide in infrastructure development projects is likely to create new opportunities for growth of the industrial x-ray inspection equipment market over the next few years.
Scope Of The Report
Report Attributes
Report Details
Report Title
Industrial X-ray Inspection Equipment and Imaging Software Market Research Report
By Type
Film Radiography, Computed Radiography, Direct Radiography, Computed Tomography
By Application
Aerospace, Food Industry, Construction, Oil and Gas, Automotive and Manufacturing, Energy and Power, Semiconductor and Electronics, Other
By Companies
YXLON International (Comet Holding), GE, Hamamatsu, L3Harris Security & Detection Systems, Canon, Olympus Corporation, Teledyne, Hitachi, Nikon Corporation, Illinois Tool Works, Carestream Health, Duerr-NDT, Rigaku Corporation, Aran Electronics Ltd., Bosello High Technology SRL (Carl Zeiss)
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
142
Number of Tables & Figures
100
Customization Available
Yes, the report can be customized as per your need.
Global Industrial X-ray Inspection Equipment and Imaging Software Market Report Segments:
The global Industrial X-ray Inspection Equipment and Imaging Software market is segmented on the basis of:
Types
Film Radiography, Computed Radiography, Direct Radiography, Computed Tomography
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Aerospace, Food Industry, Construction, Oil and Gas, Automotive and Manufacturing, Energy and Power, Semiconductor and Electronics, Other
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- YXLON International (Comet Holding)
- GE
- Hamamatsu
- L3Harris Security & Detection Systems
- Canon
- Olympus Corporation
- Teledyne
- Hitachi
- Nikon Corporation
- Illinois Tool Works
- Carestream Health
- Duerr-NDT
- Rigaku Corporation
- Aran Electronics Ltd.
- Bosello High Technology SRL (Carl Zeiss)
Highlights of The Industrial X-ray Inspection Equipment and Imaging Software Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- Film Radiography
- Computed Radiography
- Direct Radiography
- Computed Tomography
- By Application:
- Aerospace
- Food Industry
- Construction
- Oil and Gas
- Automotive and Manufacturing
- Energy and Power
- Semiconductor and Electronics
- Other
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Industrial X-ray Inspection Equipment and Imaging Software Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
Industrial X-ray Inspection Equipment and Imaging Software is a type of equipment that uses x-rays to inspect objects. It can be used in factories, warehouses, and other places where objects are stored or transported. The software used with industrial x-ray inspection equipment can help users view images of the object being inspected. This information can help identify problems with the object, such as cracks or damage.
Some of the major companies in the industrial x-ray inspection equipment and imaging software market are YXLON International (Comet Holding), GE, Hamamatsu, L3Harris Security & Detection Systems, Canon, Olympus Corporation, Teledyne, Hitachi, Nikon Corporation, Illinois Tool Works, Carestream Health, Duerr-NDT, Rigaku Corporation, Aran Electronics Ltd., Bosello High Technology SRL (Carl Zeiss).
The industrial x-ray inspection equipment and imaging software market is expected to grow at a compound annual growth rate of 6.5%.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Industrial X-ray Inspection Equipment and Imaging Software Market Overview
4.1 Introduction
4.1.1 Market Taxonomy
4.1.2 Market Definition
4.1.3 Macro-Economic Factors Impacting the Market Growth
4.2 Industrial X-ray Inspection Equipment and Imaging Software Market Dynamics
4.2.1 Market Drivers
4.2.2 Market Restraints
4.2.3 Market Opportunity
4.3 Industrial X-ray Inspection Equipment and Imaging Software Market - Supply Chain Analysis
4.3.1 List of Key Suppliers
4.3.2 List of Key Distributors
4.3.3 List of Key Consumers
4.4 Key Forces Shaping the Industrial X-ray Inspection Equipment and Imaging Software Market
4.4.1 Bargaining Power of Suppliers
4.4.2 Bargaining Power of Buyers
4.4.3 Threat of Substitution
4.4.4 Threat of New Entrants
4.4.5 Competitive Rivalry
4.5 Global Industrial X-ray Inspection Equipment and Imaging Software Market Size & Forecast, 2018-2028
4.5.1 Industrial X-ray Inspection Equipment and Imaging Software Market Size and Y-o-Y Growth
4.5.2 Industrial X-ray Inspection Equipment and Imaging Software Market Absolute $ Opportunity
Chapter 5 Global Industrial X-ray Inspection Equipment and Imaging Software Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Industrial X-ray Inspection Equipment and Imaging Software Market Size Forecast by Type
5.2.1 Film Radiography
5.2.2 Computed Radiography
5.2.3 Direct Radiography
5.2.4 Computed Tomography
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Industrial X-ray Inspection Equipment and Imaging Software Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Industrial X-ray Inspection Equipment and Imaging Software Market Size Forecast by Applications
6.2.1 Aerospace
6.2.2 Food Industry
6.2.3 Construction
6.2.4 Oil and Gas
6.2.5 Automotive and Manufacturing
6.2.6 Energy and Power
6.2.7 Semiconductor and Electronics
6.2.8 Other
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Industrial X-ray Inspection Equipment and Imaging Software Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Industrial X-ray Inspection Equipment and Imaging Software Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Industrial X-ray Inspection Equipment and Imaging Software Analysis and Forecast
9.1 Introduction
9.2 North America Industrial X-ray Inspection Equipment and Imaging Software Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Industrial X-ray Inspection Equipment and Imaging Software Market Size Forecast by Type
9.6.1 Film Radiography
9.6.2 Computed Radiography
9.6.3 Direct Radiography
9.6.4 Computed Tomography
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Industrial X-ray Inspection Equipment and Imaging Software Market Size Forecast by Applications
9.10.1 Aerospace
9.10.2 Food Industry
9.10.3 Construction
9.10.4 Oil and Gas
9.10.5 Automotive and Manufacturing
9.10.6 Energy and Power
9.10.7 Semiconductor and Electronics
9.10.8 Other
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Industrial X-ray Inspection Equipment and Imaging Software Analysis and Forecast
10.1 Introduction
10.2 Europe Industrial X-ray Inspection Equipment and Imaging Software Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Industrial X-ray Inspection Equipment and Imaging Software Market Size Forecast by Type
10.6.1 Film Radiography
10.6.2 Computed Radiography
10.6.3 Direct Radiography
10.6.4 Computed Tomography
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Industrial X-ray Inspection Equipment and Imaging Software Market Size Forecast by Applications
10.10.1 Aerospace
10.10.2 Food Industry
10.10.3 Construction
10.10.4 Oil and Gas
10.10.5 Automotive and Manufacturing
10.10.6 Energy and Power
10.10.7 Semiconductor and Electronics
10.10.8 Other
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Industrial X-ray Inspection Equipment and Imaging Software Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Industrial X-ray Inspection Equipment and Imaging Software Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Industrial X-ray Inspection Equipment and Imaging Software Market Size Forecast by Type
11.6.1 Film Radiography
11.6.2 Computed Radiography
11.6.3 Direct Radiography
11.6.4 Computed Tomography
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Industrial X-ray Inspection Equipment and Imaging Software Market Size Forecast by Applications
11.10.1 Aerospace
11.10.2 Food Industry
11.10.3 Construction
11.10.4 Oil and Gas
11.10.5 Automotive and Manufacturing
11.10.6 Energy and Power
11.10.7 Semiconductor and Electronics
11.10.8 Other
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Industrial X-ray Inspection Equipment and Imaging Software Analysis and Forecast
12.1 Introduction
12.2 Latin America Industrial X-ray Inspection Equipment and Imaging Software Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Industrial X-ray Inspection Equipment and Imaging Software Market Size Forecast by Type
12.6.1 Film Radiography
12.6.2 Computed Radiography
12.6.3 Direct Radiography
12.6.4 Computed Tomography
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Industrial X-ray Inspection Equipment and Imaging Software Market Size Forecast by Applications
12.10.1 Aerospace
12.10.2 Food Industry
12.10.3 Construction
12.10.4 Oil and Gas
12.10.5 Automotive and Manufacturing
12.10.6 Energy and Power
12.10.7 Semiconductor and Electronics
12.10.8 Other
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Industrial X-ray Inspection Equipment and Imaging Software Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Industrial X-ray Inspection Equipment and Imaging Software Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Industrial X-ray Inspection Equipment and Imaging Software Market Size Forecast by Type
13.6.1 Film Radiography
13.6.2 Computed Radiography
13.6.3 Direct Radiography
13.6.4 Computed Tomography
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Industrial X-ray Inspection Equipment and Imaging Software Market Size Forecast by Applications
13.10.1 Aerospace
13.10.2 Food Industry
13.10.3 Construction
13.10.4 Oil and Gas
13.10.5 Automotive and Manufacturing
13.10.6 Energy and Power
13.10.7 Semiconductor and Electronics
13.10.8 Other
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Industrial X-ray Inspection Equipment and Imaging Software Market: Competitive Dashboard
14.2 Global Industrial X-ray Inspection Equipment and Imaging Software Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 YXLON International (Comet Holding)
14.3.2 GE
14.3.3 Hamamatsu
14.3.4 L3Harris Security & Detection Systems
14.3.5 Canon
14.3.6 Olympus Corporation
14.3.7 Teledyne
14.3.8 Hitachi
14.3.9 Nikon Corporation
14.3.10 Illinois Tool Works
14.3.11 Carestream Health
14.3.12 Duerr-NDT
14.3.13 Rigaku Corporation
14.3.14 Aran Electronics Ltd.
14.3.15 Bosello High Technology SRL (Carl Zeiss)
