Market Overview:
The global insulated rubber tapes market is expected to grow at a CAGR of 5.5% during the forecast period from 2018 to 2030. The growth in this market can be attributed to the increasing demand for electric wire and electronic components, and the growing construction industry. In terms of type, duct tape accounted for the largest share of the global insulated rubber tapes market in 2017. This segment is projected to grow at a CAGR of 5.8% during the forecast period from 2018 to 2030. By application, electric wire accounted for the largest share of the global insulated rubber tapes market in 2017.
Product Definition:
Insulated rubber tapes are made up of a layer of rubber insulation and a layer of adhesive. They are used to insulate wires and cables, as well as to protect them from environmental factors such as moisture and corrosion.
Duct Tape:
Duct tape, also known as silicone-based flexible sheeting or siloxane-based flexible sheeting, is a widely used product in the insulation industry. It is available in various forms including wide rolls (60mm width), narrow rolls (50mm width), and sheets. Duct tapes are primarily used for sealing cracks and joints in walls, ceilings, floors & roofs of buildings; they can also be used to seal punctures made by nails or screws.
Plastic Tape(PVC):
Plastic tape) is a general term used for tapes made from plastic films. The most common types of plastic tapes are Polyethylene (PE), Polypropylene (PP), and polyvinyl chloride (PVC). Plastic tape) can be single or double-sided, but it must meet all the requirements for insulation as stated in ASTM D 5517-05 Standard.
Application Insights:
Electric wire application segment accounted for the largest revenue share in 2017 and is projected to continue its dominance over the forecast period. Insulated rubber tapes are used as an effective solution to protect electric wires from physical damage and electrical shorts caused by exposure to water or other liquids. These products also find applications in bundling, bonding, mounting & installation of electric equipment on roofs, HVAC ducts & pipes insulation as well as fire protection systems.
Electronic components application segment is expected register a CAGR of XX% from 2018 to 2030 owing to increasing product demand in various end-use industries such as automotive electronics and appliances among others which require high durability along with excellent performance characteristics when it comes to handling electricity and heat respectively.
Regional Analysis:
Asia Pacific dominated the global market in terms of revenue with a share of over 40.0% in 2017. The region is expected to witness significant growth over the forecast period owing to rising construction activities and increasing demand for electric wire insulation tapes across various industries such as automotive, electrical & electronics, building & construction, etc.
The growing manufacturing sector along with rapid urbanization has led to an increase in infrastructure spending which is anticipated to fuel demand for insulated rubber tapes across numerous applications such as HVAC&R, civil engineering projects, building & construction industry and others.
Europe was estimated at USD X million in 2017 and is projected to grow at a CAGR of XX% from 2018 to 2030 owing high consumption volumes generated by the end-use industries such as HVAC&R (heating ventilation air conditioning), electrical wiring harnesses.
Growth Factors:
- Increasing demand for insulation rubber tapes from the automotive and electrical industries due to their properties such as heat resistance, flame retardancy, and durability.
- Rising awareness about the benefits of insulation rubber tapes among consumers, which is resulting in an increase in their adoption across various end-use industries.
- Growing investments by key players in research and development activities to develop innovative products that can cater to the specific needs of different end-use industries.
- The increasing popularity of insulated rubber tapes among contractors and builders for thermal insulation purposes in construction projects is expected to drive market growth during the forecast period.
Scope Of The Report
Report Attributes
Report Details
Report Title
Insulated Rubber Tapes Market Research Report
By Type
Duct Tape, Plastic Tape(PVC), Polyester Tape
By Application
Electric Wire, Electronic Components, Others
By Companies
3M, Tesa, Achem, Plymouth Rubber Europa, Nitto Denko, Teraoka, H-old, IPG, Saint-Gobain, Four Pillars, Scapa, Berryplastics, YONGLE, Shushi Group, Tiantan Tape, Ningbo Sincere, Kuayue Plastics
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
169
Number of Tables & Figures
119
Customization Available
Yes, the report can be customized as per your need.
Global Insulated Rubber Tapes Market Report Segments:
The global Insulated Rubber Tapes market is segmented on the basis of:
Types
Duct Tape, Plastic Tape(PVC), Polyester Tape
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Electric Wire, Electronic Components, Others
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- 3M
- Tesa
- Achem
- Plymouth Rubber Europa
- Nitto Denko
- Teraoka
- H-old
- IPG
- Saint-Gobain
- Four Pillars
- Scapa
- Berryplastics
- YONGLE
- Shushi Group
- Tiantan Tape
- Ningbo Sincere
- Kuayue Plastics
Highlights of The Insulated Rubber Tapes Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- Duct Tape
- Plastic Tape(PVC)
- Polyester Tape
- By Application:
- Electric Wire
- Electronic Components
- Others
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Insulated Rubber Tapes Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
Insulated rubber tapes are a type of electrical tape that is designed to protect electrical wires and cables from heat and moisture. The insulation on these tapes helps to keep the wire or cable cool, which can prevent damage from occurring.
Some of the key players operating in the insulated rubber tapes market are 3M, Tesa, Achem, Plymouth Rubber Europa, Nitto Denko, Teraoka, H-old, IPG, Saint-Gobain, Four Pillars, Scapa, Berryplastics, YONGLE, Shushi Group, Tiantan Tape, Ningbo Sincere, Kuayue Plastics.
The insulated rubber tapes market is expected to grow at a compound annual growth rate of 5.5%.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Insulated Rubber Tapes Market Overview 4.1 Introduction 4.1.1 Market Taxonomy 4.1.2 Market Definition 4.1.3 Macro-Economic Factors Impacting the Market Growth 4.2 Insulated Rubber Tapes Market Dynamics 4.2.1 Market Drivers 4.2.2 Market Restraints 4.2.3 Market Opportunity 4.3 Insulated Rubber Tapes Market - Supply Chain Analysis 4.3.1 List of Key Suppliers 4.3.2 List of Key Distributors 4.3.3 List of Key Consumers 4.4 Key Forces Shaping the Insulated Rubber Tapes Market 4.4.1 Bargaining Power of Suppliers 4.4.2 Bargaining Power of Buyers 4.4.3 Threat of Substitution 4.4.4 Threat of New Entrants 4.4.5 Competitive Rivalry 4.5 Global Insulated Rubber Tapes Market Size & Forecast, 2018-2028 4.5.1 Insulated Rubber Tapes Market Size and Y-o-Y Growth 4.5.2 Insulated Rubber Tapes Market Absolute $ Opportunity
Chapter 5 Global Insulated Rubber Tapes Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Insulated Rubber Tapes Market Size Forecast by Type
5.2.1 Duct Tape
5.2.2 Plastic Tape(PVC)
5.2.3 Polyester Tape
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Insulated Rubber Tapes Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Insulated Rubber Tapes Market Size Forecast by Applications
6.2.1 Electric Wire
6.2.2 Electronic Components
6.2.3 Others
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Insulated Rubber Tapes Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Insulated Rubber Tapes Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Insulated Rubber Tapes Analysis and Forecast
9.1 Introduction
9.2 North America Insulated Rubber Tapes Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Insulated Rubber Tapes Market Size Forecast by Type
9.6.1 Duct Tape
9.6.2 Plastic Tape(PVC)
9.6.3 Polyester Tape
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Insulated Rubber Tapes Market Size Forecast by Applications
9.10.1 Electric Wire
9.10.2 Electronic Components
9.10.3 Others
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Insulated Rubber Tapes Analysis and Forecast
10.1 Introduction
10.2 Europe Insulated Rubber Tapes Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Insulated Rubber Tapes Market Size Forecast by Type
10.6.1 Duct Tape
10.6.2 Plastic Tape(PVC)
10.6.3 Polyester Tape
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Insulated Rubber Tapes Market Size Forecast by Applications
10.10.1 Electric Wire
10.10.2 Electronic Components
10.10.3 Others
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Insulated Rubber Tapes Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Insulated Rubber Tapes Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Insulated Rubber Tapes Market Size Forecast by Type
11.6.1 Duct Tape
11.6.2 Plastic Tape(PVC)
11.6.3 Polyester Tape
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Insulated Rubber Tapes Market Size Forecast by Applications
11.10.1 Electric Wire
11.10.2 Electronic Components
11.10.3 Others
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Insulated Rubber Tapes Analysis and Forecast
12.1 Introduction
12.2 Latin America Insulated Rubber Tapes Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Insulated Rubber Tapes Market Size Forecast by Type
12.6.1 Duct Tape
12.6.2 Plastic Tape(PVC)
12.6.3 Polyester Tape
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Insulated Rubber Tapes Market Size Forecast by Applications
12.10.1 Electric Wire
12.10.2 Electronic Components
12.10.3 Others
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Insulated Rubber Tapes Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Insulated Rubber Tapes Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Insulated Rubber Tapes Market Size Forecast by Type
13.6.1 Duct Tape
13.6.2 Plastic Tape(PVC)
13.6.3 Polyester Tape
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Insulated Rubber Tapes Market Size Forecast by Applications
13.10.1 Electric Wire
13.10.2 Electronic Components
13.10.3 Others
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Insulated Rubber Tapes Market: Competitive Dashboard
14.2 Global Insulated Rubber Tapes Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 3M
14.3.2 Tesa
14.3.3 Achem
14.3.4 Plymouth Rubber Europa
14.3.5 Nitto Denko
14.3.6 Teraoka
14.3.7 H-old
14.3.8 IPG
14.3.9 Saint-Gobain
14.3.10 Four Pillars
14.3.11 Scapa
14.3.12 Berryplastics
14.3.13 YONGLE
14.3.14 Shushi Group
14.3.15 Tiantan Tape
14.3.16 Ningbo Sincere
14.3.17 Kuayue Plastics