Market Overview:
The global insulation blow-in machines market is expected to grow at a CAGR of 5.5% during the forecast period from 2018 to 2030. The market growth can be attributed to the increasing demand for energy-efficient and green buildings, rising awareness about thermal insulation among consumers, and growing construction activities across the globe. Based on type, the global insulation blow-in machines market is segmented into up to 250 kg per hour, 250-500 kg per hour, 500-1000 kg per hour, and above 1000 kg per hour segments. The up to 250 kg per hour segment is expected to account for the largest share of the global insulation blow-in machines market in 2018 owing to its low cost and easy installation. However, with technological advancements in this field over time; higher capacity blowing machines are becoming more popular among consumers due to their high efficiency levels. Based on application, commercial applications are expected dominate the global insulation blow-in machines market in terms of revenue contribution during 2018–2030 followed by residential applications respectively.
Product Definition:
Insulation blow-in machines are equipment that are used to install insulation into wall cavities and attics. The importance of these machines is that they help to ensure that the insulation is installed properly and evenly, which can help to improve the energy efficiency of a home.
Up to 250 Kg Per Hour:
The global market for insulation blow-in machines is expected to grow at a CAGR of XX% from 2018 to 2025. The growth can be attributed to the growing demand for lightweight vehicles on account of rising fuel prices and environmental concerns.
Increasing usage in commercial building construction, owing to its ability provide energy efficiency and cost savings by reducing the amount of cold air needed during winters along with hot water & heat gains in summer is anticipated drive market growth over the forecast period.
250-500 Kg Per Hour:
250-500 Kg Per Hour is the optimal weight range for insulation blow-in machines. It helps in providing uniform insulation and also saves energy costs by reducing the amount of heat lost to the outside. 250-500 Kg Per Hour is used in various applications such as roof, wall, floor, & ceiling insulations among others.
Insulation blow-in machines are widely used across several industries including construction & building.
Application Insights:
Commercial application dominated the global market with a revenue share of over 60% in 2017. The commercial sector mainly includes buildings and infrastructure, transportation, telecom & IT and energy sectors. Insulation blow-in machines are used to insulate pipes in these sectors on a large scale as they require minimal maintenance.
The residential sector is expected to witness the fastest growth over the forecast period owing to increasing demand for energy-efficient products resulting in increased installations of insulation blow-in machines across Europe and Asia Pacific regions.
Regional Analysis:
Asia Pacific dominated the global market in 2017 and is expected to continue its dominance over the forecast period. The growth of this region can be attributed to rising product demand from residential as well as commercial applications. Asia Pacific has been witnessing rapid urbanization, which has resulted in an increased inflow of foreign investments. This, in turn, is likely to boost product demand over the forecast period.
The growing construction industry due to increasing population and rapid urbanization across emerging economies such as China and India are some of the major factors driving regional growth. In addition, favorable government policies aimed at promoting new investments are anticipated to fuel market development during the projected time frame. Europe accounted for a significant share owing to high energy consumption levels coupled with stringent environmental regulations regarding building insulation standards set by European Union (EU). As a result, consumers have been shifting their focus towards cost-effective solutions that meet regulatory requirements while saving energy costs associated with heating or cooling buildings.
Growth Factors:
- Increasing demand for energy-efficient and environment-friendly buildings
- Rising awareness about the benefits of insulation blow-in machines
- Growing construction industry in developing countries
- Technological advancements in insulation blow-in machines
- Increasing demand from end-use industries such as residential, commercial, and industrial
Scope Of The Report
Report Attributes
Report Details
Report Title
Insulation Blow-in Machines Market Research Report
By Type
Up to 250 Kg Per Hour, 250-500 Kg Per Hour, 500-1000 Kg Per Hour, Above 1000 Kg Per Hour
By Application
Commercial, Residential
By Companies
Insulation Technology Corporation (Intec), Cool Machines Inc, CertainTeed Corporation (Saint-Gobain), Krendl Machine, X-Floc Dammtechnik-Maschinen, Isol Finance France, Meyer Contractor Solutions, Owens Corning (AttiCat), Star Machine Limited, Accu1Direct Inc, Insulation Technology Corporation (Intec), Heat Seal Equipment
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
233
Number of Tables & Figures
164
Customization Available
Yes, the report can be customized as per your need.
Global Insulation Blow-in Machines Market Report Segments:
The global Insulation Blow-in Machines market is segmented on the basis of:
Types
Up to 250 Kg Per Hour, 250-500 Kg Per Hour, 500-1000 Kg Per Hour, Above 1000 Kg Per Hour
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Commercial, Residential
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- Insulation Technology Corporation (Intec)
- Cool Machines Inc
- CertainTeed Corporation (Saint-Gobain)
- Krendl Machine
- X-Floc Dammtechnik-Maschinen
- Isol Finance France
- Meyer Contractor Solutions
- Owens Corning (AttiCat)
- Star Machine Limited
- Accu1Direct Inc
- Insulation Technology Corporation (Intec)
- Heat Seal Equipment
Highlights of The Insulation Blow-in Machines Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- Up to 250 Kg Per Hour
- 250-500 Kg Per Hour
- 500-1000 Kg Per Hour
- Above 1000 Kg Per Hour
- By Application:
- Commercial
- Residential
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Insulation Blow-in Machines Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
Insulation Blow-in Machines are used to insulate building and construction materials. The machines use a high-pressure air stream to create insulation in the form of pellets or blocks.
Some of the key players operating in the insulation blow-in machines market are Insulation Technology Corporation (Intec), Cool Machines Inc, CertainTeed Corporation (Saint-Gobain), Krendl Machine, X-Floc Dammtechnik-Maschinen, Isol Finance France, Meyer Contractor Solutions, Owens Corning (AttiCat), Star Machine Limited, Accu1Direct Inc, Insulation Technology Corporation (Intec), Heat Seal Equipment.
The insulation blow-in machines market is expected to register a CAGR of 5.5%.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Insulation Blow-in Machines Market Overview
4.1 Introduction
4.1.1 Market Taxonomy
4.1.2 Market Definition
4.1.3 Macro-Economic Factors Impacting the Market Growth
4.2 Insulation Blow-in Machines Market Dynamics
4.2.1 Market Drivers
4.2.2 Market Restraints
4.2.3 Market Opportunity
4.3 Insulation Blow-in Machines Market - Supply Chain Analysis
4.3.1 List of Key Suppliers
4.3.2 List of Key Distributors
4.3.3 List of Key Consumers
4.4 Key Forces Shaping the Insulation Blow-in Machines Market
4.4.1 Bargaining Power of Suppliers
4.4.2 Bargaining Power of Buyers
4.4.3 Threat of Substitution
4.4.4 Threat of New Entrants
4.4.5 Competitive Rivalry
4.5 Global Insulation Blow-in Machines Market Size & Forecast, 2018-2028
4.5.1 Insulation Blow-in Machines Market Size and Y-o-Y Growth
4.5.2 Insulation Blow-in Machines Market Absolute $ Opportunity
Chapter 5 Global Insulation Blow-in Machines Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Insulation Blow-in Machines Market Size Forecast by Type
5.2.1 Up to 250 Kg Per Hour
5.2.2 250-500 Kg Per Hour
5.2.3 500-1000 Kg Per Hour
5.2.4 Above 1000 Kg Per Hour
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Insulation Blow-in Machines Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Insulation Blow-in Machines Market Size Forecast by Applications
6.2.1 Commercial
6.2.2 Residential
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Insulation Blow-in Machines Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Insulation Blow-in Machines Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Insulation Blow-in Machines Analysis and Forecast
9.1 Introduction
9.2 North America Insulation Blow-in Machines Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Insulation Blow-in Machines Market Size Forecast by Type
9.6.1 Up to 250 Kg Per Hour
9.6.2 250-500 Kg Per Hour
9.6.3 500-1000 Kg Per Hour
9.6.4 Above 1000 Kg Per Hour
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Insulation Blow-in Machines Market Size Forecast by Applications
9.10.1 Commercial
9.10.2 Residential
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Insulation Blow-in Machines Analysis and Forecast
10.1 Introduction
10.2 Europe Insulation Blow-in Machines Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Insulation Blow-in Machines Market Size Forecast by Type
10.6.1 Up to 250 Kg Per Hour
10.6.2 250-500 Kg Per Hour
10.6.3 500-1000 Kg Per Hour
10.6.4 Above 1000 Kg Per Hour
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Insulation Blow-in Machines Market Size Forecast by Applications
10.10.1 Commercial
10.10.2 Residential
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Insulation Blow-in Machines Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Insulation Blow-in Machines Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Insulation Blow-in Machines Market Size Forecast by Type
11.6.1 Up to 250 Kg Per Hour
11.6.2 250-500 Kg Per Hour
11.6.3 500-1000 Kg Per Hour
11.6.4 Above 1000 Kg Per Hour
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Insulation Blow-in Machines Market Size Forecast by Applications
11.10.1 Commercial
11.10.2 Residential
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Insulation Blow-in Machines Analysis and Forecast
12.1 Introduction
12.2 Latin America Insulation Blow-in Machines Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Insulation Blow-in Machines Market Size Forecast by Type
12.6.1 Up to 250 Kg Per Hour
12.6.2 250-500 Kg Per Hour
12.6.3 500-1000 Kg Per Hour
12.6.4 Above 1000 Kg Per Hour
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Insulation Blow-in Machines Market Size Forecast by Applications
12.10.1 Commercial
12.10.2 Residential
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Insulation Blow-in Machines Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Insulation Blow-in Machines Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Insulation Blow-in Machines Market Size Forecast by Type
13.6.1 Up to 250 Kg Per Hour
13.6.2 250-500 Kg Per Hour
13.6.3 500-1000 Kg Per Hour
13.6.4 Above 1000 Kg Per Hour
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Insulation Blow-in Machines Market Size Forecast by Applications
13.10.1 Commercial
13.10.2 Residential
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Insulation Blow-in Machines Market: Competitive Dashboard
14.2 Global Insulation Blow-in Machines Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 Insulation Technology Corporation (Intec)
14.3.2 Cool Machines Inc
14.3.3 CertainTeed Corporation (Saint-Gobain)
14.3.4 Krendl Machine
14.3.5 X-Floc Dammtechnik-Maschinen
14.3.6 Isol Finance France
14.3.7 Meyer Contractor Solutions
14.3.8 Owens Corning (AttiCat)
14.3.9 Star Machine Limited
14.3.10 Accu1Direct Inc
14.3.11 Insulation Technology Corporation (Intec)
14.3.12 Heat Seal Equipment
