Market Overview:
The global lead and zinc mining market is expected to grow at a CAGR of 5.5% during the forecast period from 2018 to 2030. The market growth can be attributed to the increasing demand for lead and zinc from various applications such as cars, buildings, ships, mechanical equipment, and others. In addition, the growing demand for lead and zinc in developing countries is also contributing to the growth of this market. However, factors such as environmental concerns related to mining activities may restrain the growth of this market during the forecast period.
Product Definition:
Lead and zinc are essential for the production of batteries, alloys, and other products.
Lead:
Lead is a soft metal with high density and relatively low melting point. It is the first element in its group to solidify in a molten state at normal room temperature. Lead has been used for thousands of years as an alloying agent, as it can increase the hardness and strength of various alloys such as bronzes.
Zinc:
Zinc is a chemical element that is an essential mineral for both plant and animal life. It plays an important role in the growth of plants as it helps in the protection against diseases and also aids in increasing the yield of crops. Zinc deficiency leads to poor crop quality and reduced yields. In animals, zinc deficiency results into loss of appetite, diarrhea, vomiting, low weight gain & production as well as slow growth rate.
Application Insights:
The mechanical application segment led the global lead and zinc mining market in 2017. This was attributed to increasing demand for the product in various industries including construction, automotive, and electronics. In recent years, there has been a rise in electronic devices manufacturing across the globe which is expected to propel demand for lead-acid batteries over the next eight years. This will provide an opportunity to industry participants as they will be able to meet this rising demand with ease.
Lead-acid batteries are considered as one of the cleanest sources of energy due largely to their ability not only generate electricity but also reduce greenhouse gases significantly when compared with other forms of power generation such as coal or gas plants.
Regional Analysis:
Asia Pacific dominated the global market in 2017, accounting for a share of over 45%. The region is expected to continue its dominance over the forecast period. China and India are among the largest producers and consumers of lead and zinc globally. In terms of production, nearly 70% comes from these countries while consumption stands at around 60% respectively.
The Asia Pacific regional market is characterized by high demand from end-use industries such as automotive, electronics, construction materials such as glass fiber reinforced plastics (GFRP) owing to rapid industrialization coupled with urbanization in emerging economies including China and India. Growing population coupled with rising disposable income has led to an increase in consumer spending on automobiles which will further drive growth across this region during the forecast period.
Europe was another major contributor towards global mining production accounting for a share of more than 20%.
Growth Factors:
- Increasing demand from the automobile and electronics industries
- Growing urbanization and industrialization in developing countries
- Rising investment in infrastructure development
- Proliferation of new technologies that require lead and zinc for their manufacturing process
- Stringent environmental regulations to promote the use of lead-free or low-lead automotive components
Scope Of The Report
Report Attributes
Report Details
Report Title
Lead and Zinc Mining Market Research Report
By Type
Lead, Zinc
By Application
Car, Building, Ship, Mechanical, Others
By Companies
Nyrstar, Glencore Xstrata, Boliden, Teck, Trevali, Hudbay Minerals, Zijin Mining, Hindustan Zinc, Votorantim, China Minmetals, Vedanta Resources Limited, BHP Group, Sumitomo Corporation
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
229
Number of Tables & Figures
161
Customization Available
Yes, the report can be customized as per your need.
Global Lead and Zinc Mining Market Report Segments:
The global Lead and Zinc Mining market is segmented on the basis of:
Types
Lead, Zinc
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Car, Building, Ship, Mechanical, Others
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- Nyrstar
- Glencore Xstrata
- Boliden
- Teck
- Trevali
- Hudbay Minerals
- Zijin Mining
- Hindustan Zinc
- Votorantim
- China Minmetals
- Vedanta Resources Limited
- BHP Group
- Sumitomo Corporation
Highlights of The Lead and Zinc Mining Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- Lead
- Zinc
- By Application:
- Car
- Building
- Ship
- Mechanical
- Others
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Lead and Zinc Mining Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
Lead and zinc mining is the process of extracting these metals from their ores. Lead and zinc are often found together in rocks, so miners must break them down with a hammer or other tool to extract the individual metal.
Some of the major players in the lead and zinc mining market are Nyrstar, Glencore Xstrata, Boliden, Teck, Trevali, Hudbay Minerals, Zijin Mining, Hindustan Zinc, Votorantim, China Minmetals, Vedanta Resources Limited, BHP Group, Sumitomo Corporation.
The lead and zinc mining market is expected to register a CAGR of 5.5%.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Lead and Zinc Mining Market Overview
4.1 Introduction
4.1.1 Market Taxonomy
4.1.2 Market Definition
4.1.3 Macro-Economic Factors Impacting the Market Growth
4.2 Lead and Zinc Mining Market Dynamics
4.2.1 Market Drivers
4.2.2 Market Restraints
4.2.3 Market Opportunity
4.3 Lead and Zinc Mining Market - Supply Chain Analysis
4.3.1 List of Key Suppliers
4.3.2 List of Key Distributors
4.3.3 List of Key Consumers
4.4 Key Forces Shaping the Lead and Zinc Mining Market
4.4.1 Bargaining Power of Suppliers
4.4.2 Bargaining Power of Buyers
4.4.3 Threat of Substitution
4.4.4 Threat of New Entrants
4.4.5 Competitive Rivalry
4.5 Global Lead and Zinc Mining Market Size & Forecast, 2020-2028
4.5.1 Lead and Zinc Mining Market Size and Y-o-Y Growth
4.5.2 Lead and Zinc Mining Market Absolute $ Opportunity
Chapter 5 Global Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Market Size Forecast by Type
5.2.1 Lead
5.2.2 Zinc
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Market Size Forecast by Applications
6.2.1 Car
6.2.2 Building
6.2.3 Ship
6.2.4 Mechanical
6.2.5 Others
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Lead and Zinc Mining Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Lead and Zinc Mining Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Analysis and Forecast
9.1 Introduction
9.2 North America Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Market Size Forecast by Type
9.6.1 Lead
9.6.2 Zinc
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Market Size Forecast by Applications
9.10.1 Car
9.10.2 Building
9.10.3 Ship
9.10.4 Mechanical
9.10.5 Others
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Analysis and Forecast
10.1 Introduction
10.2 Europe Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Market Size Forecast by Type
10.6.1 Lead
10.6.2 Zinc
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Market Size Forecast by Applications
10.10.1 Car
10.10.2 Building
10.10.3 Ship
10.10.4 Mechanical
10.10.5 Others
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Market Size Forecast by Type
11.6.1 Lead
11.6.2 Zinc
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Market Size Forecast by Applications
11.10.1 Car
11.10.2 Building
11.10.3 Ship
11.10.4 Mechanical
11.10.5 Others
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Analysis and Forecast
12.1 Introduction
12.2 Latin America Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Market Size Forecast by Type
12.6.1 Lead
12.6.2 Zinc
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Market Size Forecast by Applications
12.10.1 Car
12.10.2 Building
12.10.3 Ship
12.10.4 Mechanical
12.10.5 Others
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Market Size Forecast by Type
13.6.1 Lead
13.6.2 Zinc
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Market Size Forecast by Applications
13.10.1 Car
13.10.2 Building
13.10.3 Ship
13.10.4 Mechanical
13.10.5 Others
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Lead and Zinc Mining Market: Competitive Dashboard
14.2 Global Lead and Zinc Mining Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 Nyrstar
14.3.2 Glencore Xstrata
14.3.3 Boliden
14.3.4 Teck
14.3.5 Trevali
14.3.6 Hudbay Minerals
14.3.7 Zijin Mining
14.3.8 Hindustan Zinc
14.3.9 Votorantim
14.3.10 China Minmetals
14.3.11 Vedanta Resources Limited
14.3.12 BHP Group
14.3.13 Sumitomo Corporation
