Market Overview:
The global mains filters market is expected to grow at a CAGR of 5.5% during the forecast period from 2018 to 2030. The growth in this market can be attributed to the increasing demand for mains filters in power supply units, industrial applications, mechanical equipment, medical equipment, laboratory equipment and others. In addition, the growing awareness about energy efficiency and the need for reliable power supply are also contributing to the growth of this market.
Product Definition:
A mains filter is an electronic device which is connected between the power supply and the equipment to be protected. It filters out any unwanted noise or spikes on the mains supply, and provides a clean, stable power supply to the equipment. This can help to protect against damage or malfunction caused by dirty power, and can also improve the performance of sensitive electronic devices.
Single Phase:
Single-phase filters are used to protect electronic devices from harmful power fluctuations and voltage fluctuations. Single-phase filters have a low pass frequency of 50 hertz and a highpass frequency of 60 hertz. The single phase filter is mainly used in the mains power filter market, which is further segmented into two categories such as AC input type and DC input type.
Three Phase:
Three phase is a type of electric supply where the voltage varies in three different phases. The most common example of this is a power outlet with two round prongs and one flat prong.
The figure shows an example of three-phase power outlets, which has two hot wires (red & black) and one neutral wire (green). There are many devices that use this kind of supply including air conditioners, coffee machines, refrigerators etc.
Application Insights:
The mechanical equipment segment dominated the global market in 2017. The growth can be attributed to the rising demand for filters from various industrial applications including power supply units, air handling units, industrial cooling & ventilation systems, and others. Power supply units are used in residential as well as commercial areas for providing electricity. In such applications, it is important to ensure clean and continuous flow of air without any obstruction. Mains filters are thus widely used in power supply units across the globe owing to their ability to provide clear airflow while maintaining high dust filtration standards required by industrial applications worldwide.
Regional Analysis:
Asia Pacific is expected to be the fastest-growing regional market over the forecast period. The growth can be attributed to rising industrialization and expansion of manufacturing facilities in countries, such as China, India, Japan, South Korea and Taiwan. In addition, increasing number of power supply units installed in residential buildings is also anticipated to drive the regional market growth over the forecast period.
The Asia Pacific region accounted for a revenue share of 22% in 2017 owing to growing demand from end-use industries across various applications including medical equipment & supplies; laboratory equipment; HVAC & refrigeration; food processing & packaging machinery; security systems & surveillance cameras among others. Increasing penetration rate for smart grid solutions coupled with growing awareness about renewable energy sources is further expected to augment industry growth over next eight years in this region.
Europe was estimated at USD X billion in 2017.
Growth Factors:
- Increasing demand from the automotive and industrial sectors for Mains Filters is expected to drive the market growth.
- Growing awareness about the benefits of using Mains Filters in various applications is projected to fuel the market growth.
- The increasing demand for advanced filtration technologies is anticipated to propel the Mains Filters market growth during the forecast period.
- Rising investments in research and development activities by leading players is likely to boost the Mains Filters market growth in future years.
Scope Of The Report
Report Attributes
Report Details
Report Title
Mains Filters Market Research Report
By Type
Single Phase, Three Phase
By Application
Power Supply Units, Industrial Applications, Mechanical Equipment, Medical Equipment, Laboratory Equipment, Others
By Companies
Bulgin Limited, ABB, REO, Kollmorgen, Total EMC Products Ltd, Cross Country Wireless, PETER Electronic, Tesch-emc, Schneider Electric, ACT Meters, DEHN SE + Co KG, Roxburgh EMC, BDF Digital
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
243
Number of Tables & Figures
171
Customization Available
Yes, the report can be customized as per your need.
Global Mains Filters Market Report Segments:
The global Mains Filters market is segmented on the basis of:
Types
Single Phase, Three Phase
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Power Supply Units, Industrial Applications, Mechanical Equipment, Medical Equipment, Laboratory Equipment, Others
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- Bulgin Limited
- ABB
- REO
- Kollmorgen
- Total EMC Products Ltd
- Cross Country Wireless
- PETER Electronic
- Tesch-emc
- Schneider Electric
- ACT Meters
- DEHN SE + Co KG
- Roxburgh EMC
- BDF Digital
Highlights of The Mains Filters Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- Single Phase
- Three Phase
- By Application:
- Power Supply Units
- Industrial Applications
- Mechanical Equipment
- Medical Equipment
- Laboratory Equipment
- Others
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Mains Filters Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
Mains filters are the most common type of filter in your home. They're usually made from paper or cloth and can be found in your kitchen, bathroom, and other places where water is used. Mains filters trap small particles such as bacteria, dirt, and sediment that could make your water unsafe to drink.
Some of the major companies in the mains filters market are Bulgin Limited, ABB, REO, Kollmorgen, Total EMC Products Ltd, Cross Country Wireless, PETER Electronic, Tesch-emc, Schneider Electric, ACT Meters, DEHN SE + Co KG, Roxburgh EMC, BDF Digital.
The mains filters market is expected to register a CAGR of 5.5%.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Mains Filters Market Overview 4.1 Introduction 4.1.1 Market Taxonomy 4.1.2 Market Definition 4.1.3 Macro-Economic Factors Impacting the Market Growth 4.2 Mains Filters Market Dynamics 4.2.1 Market Drivers 4.2.2 Market Restraints 4.2.3 Market Opportunity 4.3 Mains Filters Market - Supply Chain Analysis 4.3.1 List of Key Suppliers 4.3.2 List of Key Distributors 4.3.3 List of Key Consumers 4.4 Key Forces Shaping the Mains Filters Market 4.4.1 Bargaining Power of Suppliers 4.4.2 Bargaining Power of Buyers 4.4.3 Threat of Substitution 4.4.4 Threat of New Entrants 4.4.5 Competitive Rivalry 4.5 Global Mains Filters Market Size & Forecast, 2020-2028 4.5.1 Mains Filters Market Size and Y-o-Y Growth 4.5.2 Mains Filters Market Absolute $ Opportunity
Chapter 5 Global Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Market Size Forecast by Type
5.2.1 Single Phase
5.2.2 Three Phase
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Market Size Forecast by Applications
6.2.1 Power Supply Units
6.2.2 Industrial Applications
6.2.3 Mechanical Equipment
6.2.4 Medical Equipment
6.2.5 Laboratory Equipment
6.2.6 Others
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Mains Filters Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Mains Filters Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Analysis and Forecast
9.1 Introduction
9.2 North America Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Market Size Forecast by Type
9.6.1 Single Phase
9.6.2 Three Phase
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Market Size Forecast by Applications
9.10.1 Power Supply Units
9.10.2 Industrial Applications
9.10.3 Mechanical Equipment
9.10.4 Medical Equipment
9.10.5 Laboratory Equipment
9.10.6 Others
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Analysis and Forecast
10.1 Introduction
10.2 Europe Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Market Size Forecast by Type
10.6.1 Single Phase
10.6.2 Three Phase
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Market Size Forecast by Applications
10.10.1 Power Supply Units
10.10.2 Industrial Applications
10.10.3 Mechanical Equipment
10.10.4 Medical Equipment
10.10.5 Laboratory Equipment
10.10.6 Others
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Market Size Forecast by Type
11.6.1 Single Phase
11.6.2 Three Phase
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Market Size Forecast by Applications
11.10.1 Power Supply Units
11.10.2 Industrial Applications
11.10.3 Mechanical Equipment
11.10.4 Medical Equipment
11.10.5 Laboratory Equipment
11.10.6 Others
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Analysis and Forecast
12.1 Introduction
12.2 Latin America Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Market Size Forecast by Type
12.6.1 Single Phase
12.6.2 Three Phase
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Market Size Forecast by Applications
12.10.1 Power Supply Units
12.10.2 Industrial Applications
12.10.3 Mechanical Equipment
12.10.4 Medical Equipment
12.10.5 Laboratory Equipment
12.10.6 Others
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Market Size Forecast by Type
13.6.1 Single Phase
13.6.2 Three Phase
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Market Size Forecast by Applications
13.10.1 Power Supply Units
13.10.2 Industrial Applications
13.10.3 Mechanical Equipment
13.10.4 Medical Equipment
13.10.5 Laboratory Equipment
13.10.6 Others
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Mains Filters Market: Competitive Dashboard
14.2 Global Mains Filters Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 Bulgin Limited
14.3.2 ABB
14.3.3 REO
14.3.4 Kollmorgen
14.3.5 Total EMC Products Ltd
14.3.6 Cross Country Wireless
14.3.7 PETER Electronic
14.3.8 Tesch-emc
14.3.9 Schneider Electric
14.3.10 ACT Meters
14.3.11 DEHN SE + Co KG
14.3.12 Roxburgh EMC
14.3.13 BDF Digital