Market Overview:
The global measuring projectors market is expected to grow at a CAGR of 5.5% during the forecast period from 2018 to 2030. The market growth can be attributed to the increasing demand for precision and accuracy in measurements across various industries. Additionally, the growing adoption of 3D printing technology is also propelling the growth of this market. However, factors such as high cost and lack of awareness about these products are restraining its growth rate to some extent. On the basis of type, vertical measuring projectors held a larger share in 2017 and is expected to maintain its dominance during the forecast period as well. This can be attributed to their ability to provide accurate measurements even in difficult-to-reach areas or tight spaces.
Product Definition:
A measuring projector is a device that projects a pattern of lines or dots onto the surface to be measured. It is used to accurately measure distances, angles and other dimensions.
Vertical:
Vertical is the distance from the screen's surface to its lowest point and it is measured in millimeters. The shorter the Vertical, the closer to a flat panel display (FPD) it will be. A projector that measures less than 2 meters will have very narrow bezels; those with more than 3 meters of vertical measurement offer greater projection distances with larger bezels as compensation.
Horizontal:
Horizontal is the part of a display that can be seen when looking at it from the side. It is usually represented by the letter H or by the symbol. The horizontal measurement of a projector consists of two parts: width and height. The shorter side (e.g., right or left) is called as lumen and longer side (top or bottom) is called as candelas per square meter (CPMS).
Application Insights:
The research institute application segment accounted for the largest revenue share in 2017 and is projected to continue its dominance over the forecast period. This can be attributed to growing usage of these devices in various research institutes and universities. The vertical market-based measuring projectors has been witnessing significant growth, especially in developed economies such as U.K., Germany, Japan, and France due to increasing demand for high precision equipment by manufacturers operating within stringent safety norms set by regulatory authorities across various industries worldwide.
Regional Analysis:
North America dominated the global market in 2017. The region is expected to witness a considerable growth rate of 5.6% over the forecast period, owing to increasing R&D activities and rising adoption of technologies such as digital projectors for teaching purposes and measurement education programs by government organizations. Moreover, growing demand for high-precision tools from various industries is anticipated to drive regional growth over the forecast period.
Asia Pacific is projected to be one of the fastest-growing regions during the same period owing to rapid industrialization in countries such as China, India, Japan.
Growth Factors:
- Increasing demand for projectors in the education sector as a teaching aid
- Rising demand for projectors from the corporate sector for presentations and meetings
- Increasing use of projectors in homes due to their growing popularity as a home entertainment system
- Proliferation of digital content that is best viewed on a projector screen
- Advances in projector technology that make them more affordable, compact and user-friendly
Scope Of The Report
Report Attributes
Report Details
Report Title
Measuring Projectors Market Research Report
By Type
Vertical, Horizontal
By Application
Machinery Industry, Metal Industry, Electrical Industry, Light Industry, Plastic and Rubber Industry, Research Rnstitute, Others
By Companies
Nikon, Zeiss, Mitutoyo, Heinrich Schneider, Marcel Aubert Sa, Sipcon Instrument, Sipcon Instrument, Qualitest International Inc, Carmar, Sinowon, Easson, LGtester
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
220
Number of Tables & Figures
154
Customization Available
Yes, the report can be customized as per your need.
Global Measuring Projectors Market Report Segments:
The global Measuring Projectors market is segmented on the basis of:
Types
Vertical, Horizontal
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Machinery Industry, Metal Industry, Electrical Industry, Light Industry, Plastic and Rubber Industry, Research Rnstitute, Others
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- Nikon
- Zeiss
- Mitutoyo
- Heinrich Schneider
- Marcel Aubert Sa
- Sipcon Instrument
- Sipcon Instrument
- Qualitest International Inc
- Carmar
- Sinowon
- Easson
- LGtester
Highlights of The Measuring Projectors Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- Vertical
- Horizontal
- By Application:
- Machinery Industry
- Metal Industry
- Electrical Industry
- Light Industry
- Plastic and Rubber Industry
- Research Rnstitute
- Others
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Measuring Projectors Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
There is no one definitive answer to this question. Some factors that may be considered include the size and type of projector, the brightness of the projected image, and how often the projector is used.
Some of the key players operating in the measuring projectors market are Nikon, Zeiss, Mitutoyo, Heinrich Schneider, Marcel Aubert Sa, Sipcon Instrument, Sipcon Instrument, Qualitest International Inc, Carmar, Sinowon, Easson, LGtester.
The measuring projectors market is expected to register a CAGR of 5.5%.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Measuring Projectors Market Overview
4.1 Introduction
4.1.1 Market Taxonomy
4.1.2 Market Definition
4.1.3 Macro-Economic Factors Impacting the Market Growth
4.2 Measuring Projectors Market Dynamics
4.2.1 Market Drivers
4.2.2 Market Restraints
4.2.3 Market Opportunity
4.3 Measuring Projectors Market - Supply Chain Analysis
4.3.1 List of Key Suppliers
4.3.2 List of Key Distributors
4.3.3 List of Key Consumers
4.4 Key Forces Shaping the Measuring Projectors Market
4.4.1 Bargaining Power of Suppliers
4.4.2 Bargaining Power of Buyers
4.4.3 Threat of Substitution
4.4.4 Threat of New Entrants
4.4.5 Competitive Rivalry
4.5 Global Measuring Projectors Market Size & Forecast, 2018-2028
4.5.1 Measuring Projectors Market Size and Y-o-Y Growth
4.5.2 Measuring Projectors Market Absolute $ Opportunity
Chapter 5 Global Measuring Projectors Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Measuring Projectors Market Size Forecast by Type
5.2.1 Vertical
5.2.2 Horizontal
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Measuring Projectors Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Measuring Projectors Market Size Forecast by Applications
6.2.1 Machinery Industry
6.2.2 Metal Industry
6.2.3 Electrical Industry
6.2.4 Light Industry
6.2.5 Plastic and Rubber Industry
6.2.6 Research Rnstitute
6.2.7 Others
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Measuring Projectors Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Measuring Projectors Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Measuring Projectors Analysis and Forecast
9.1 Introduction
9.2 North America Measuring Projectors Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Measuring Projectors Market Size Forecast by Type
9.6.1 Vertical
9.6.2 Horizontal
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Measuring Projectors Market Size Forecast by Applications
9.10.1 Machinery Industry
9.10.2 Metal Industry
9.10.3 Electrical Industry
9.10.4 Light Industry
9.10.5 Plastic and Rubber Industry
9.10.6 Research Rnstitute
9.10.7 Others
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Measuring Projectors Analysis and Forecast
10.1 Introduction
10.2 Europe Measuring Projectors Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Measuring Projectors Market Size Forecast by Type
10.6.1 Vertical
10.6.2 Horizontal
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Measuring Projectors Market Size Forecast by Applications
10.10.1 Machinery Industry
10.10.2 Metal Industry
10.10.3 Electrical Industry
10.10.4 Light Industry
10.10.5 Plastic and Rubber Industry
10.10.6 Research Rnstitute
10.10.7 Others
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Measuring Projectors Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Measuring Projectors Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Measuring Projectors Market Size Forecast by Type
11.6.1 Vertical
11.6.2 Horizontal
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Measuring Projectors Market Size Forecast by Applications
11.10.1 Machinery Industry
11.10.2 Metal Industry
11.10.3 Electrical Industry
11.10.4 Light Industry
11.10.5 Plastic and Rubber Industry
11.10.6 Research Rnstitute
11.10.7 Others
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Measuring Projectors Analysis and Forecast
12.1 Introduction
12.2 Latin America Measuring Projectors Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Measuring Projectors Market Size Forecast by Type
12.6.1 Vertical
12.6.2 Horizontal
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Measuring Projectors Market Size Forecast by Applications
12.10.1 Machinery Industry
12.10.2 Metal Industry
12.10.3 Electrical Industry
12.10.4 Light Industry
12.10.5 Plastic and Rubber Industry
12.10.6 Research Rnstitute
12.10.7 Others
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Measuring Projectors Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Measuring Projectors Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Measuring Projectors Market Size Forecast by Type
13.6.1 Vertical
13.6.2 Horizontal
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Measuring Projectors Market Size Forecast by Applications
13.10.1 Machinery Industry
13.10.2 Metal Industry
13.10.3 Electrical Industry
13.10.4 Light Industry
13.10.5 Plastic and Rubber Industry
13.10.6 Research Rnstitute
13.10.7 Others
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Measuring Projectors Market: Competitive Dashboard
14.2 Global Measuring Projectors Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 Nikon
14.3.2 Zeiss
14.3.3 Mitutoyo
14.3.4 Heinrich Schneider
14.3.5 Marcel Aubert Sa
14.3.6 Sipcon Instrument
14.3.7 Sipcon Instrument
14.3.8 Qualitest International Inc
14.3.9 Carmar
14.3.10 Sinowon
14.3.11 Easson
14.3.12 LGtester
