Market Overview:
The Global Microcristallina Cera Market is expected to grow at a CAGR of 5.5% during the forecast period from 2018 to 2030. The market growth is attributed to the increasing demand for microcristallina cera in various applications such as rubber industry, explosive industry, cosmetic and pharmaceuticals, food industry, resin industry and electronics industry. In addition, the growing demand for microcristallina cera in regions such as North America, Latin America, Europe Asia Pacific and Middle East & Africa is also contributing to the market growth.
Product Definition:
Microcristallina cera is a type of wax that has small, crystalline particles. It is used in cosmetics, personal care products, and other applications where a hard finish or sealant is needed.
75#:
75% is a high purity form of microcrystalline wax. It has the same properties as paraffin wax but with better flow and less moisture. 75% is used in Microcristallina Cera (MCC) production, which is further used for polishing applications in the automotive industry mainly tire manufacturing.
The global MCC market size was valued at USD 1,250 million in 2016.
85#:
85% of microcristallina ceras are used in the production of cosmetics, and 85% of the total volume is consumed by creams, lotions and ointments. The other 15% is utilized for research & development activities. Microcristallina has been proven to be an effective treatment for diabetic foot ulcers as well as venous leg ulcers.
Application Insights:
The market is segmented by application into rubber industry, explosive industry, cosmetic and pharmaceutical, food and beverage industries as well as resin industries. Rubber was the largest application segment in 2017. The growth of this application can be attributed to increasing demand for microcristallina ceras from various applications such as tire manufacturing in automobiles or trucks, aircraft tires etc. Tire manufacturers are continuously seeking alternative raw materials with low cost that do not affect the performance of vehicles and reduce environmental pollution to a large extent. This factor is expected to drive product demand over the forecast period.
Microcristallina cera has several uses including its use in explosives which dates back from ancient times when it was first discovered by accident during mining activities around 500 BC at depths greater than 60 meters below ground surface (Mei 2009).
Regional Analysis:
Asia Pacific is anticipated to be the fastest growing regional market with a CAGR of XX% from 2018 to 2030 owing to increasing demand for microcristallina ceras in various end-use industries such as rubber, explosive, cosmetic and pharmaceutical. The region is expected to dominate the global industry over the forecast period due to rapid industrialization and growth of key end-use sectors such as automotive, construction materials, electronics and others in this region.
North America accounted for a significant share of global revenue mainly driven by high consumption levels within U.S.
Growth Factors:
- Increasing demand from end-use industries such as cosmetics, personal care products, and pharmaceuticals
- Rising awareness about the benefits of using MC products among consumers
- Growing number of product launches by key players to cater to the increasing demand
- Technological advancements in production processes that result in improved quality and performance of MC products
- Expansion of distribution channels across regions
Scope Of The Report
Report Attributes
Report Details
Report Title
Microcristallina Cera Market Research Report
By Type
75#, 85#, 90#, Others
By Application
Rubber industry, Explosive Industry, Cosmetic and Pharmaceutical, Food Industry, Resin Industry, Electronics Industry, Others
By Companies
A&A Fratelli Parodi, Qingdao Sinoplas Hi-New Material, Koster Keunen, Aiglon, Industrial Raw Materials, Jarchem Industries, The International Group, Paramelt, KahlWax, Sonneborn LLC, Multiceras, Kerax, Sasol, Strahl & Pitch
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
217
Number of Tables & Figures
152
Customization Available
Yes, the report can be customized as per your need.
Global Microcristallina Cera Market Report Segments:
The global Microcristallina Cera market is segmented on the basis of:
Types
75#, 85#, 90#, Others
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Rubber industry, Explosive Industry, Cosmetic and Pharmaceutical, Food Industry, Resin Industry, Electronics Industry, Others
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- A&A Fratelli Parodi
- Qingdao Sinoplas Hi-New Material
- Koster Keunen
- Aiglon
- Industrial Raw Materials
- Jarchem Industries
- The International Group
- Paramelt
- KahlWax
- Sonneborn LLC
- Multiceras
- Kerax
- Sasol
- Strahl & Pitch
Highlights of The Microcristallina Cera Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- 75#
- 85#
- 90#
- Others
- By Application:
- Rubber industry
- Explosive Industry
- Cosmetic and Pharmaceutical
- Food Industry
- Resin Industry
- Electronics Industry
- Others
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Microcristallina Cera Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
Microcristallina Cera is a type of wax that is made from the melted down microcrystalline waxes of various types of plants. It can be used as an additive in candles, cosmetics, and other products.
Some of the major companies in the microcristallina cera market are A&A Fratelli Parodi, Qingdao Sinoplas Hi-New Material, Koster Keunen, Aiglon, Industrial Raw Materials, Jarchem Industries, The International Group, Paramelt, KahlWax, Sonneborn LLC, Multiceras, Kerax, Sasol, Strahl & Pitch.
The microcristallina cera market is expected to register a CAGR of 5.5%.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Microcristallina Cera Market Overview
4.1 Introduction
4.1.1 Market Taxonomy
4.1.2 Market Definition
4.1.3 Macro-Economic Factors Impacting the Market Growth
4.2 Microcristallina Cera Market Dynamics
4.2.1 Market Drivers
4.2.2 Market Restraints
4.2.3 Market Opportunity
4.3 Microcristallina Cera Market - Supply Chain Analysis
4.3.1 List of Key Suppliers
4.3.2 List of Key Distributors
4.3.3 List of Key Consumers
4.4 Key Forces Shaping the Microcristallina Cera Market
4.4.1 Bargaining Power of Suppliers
4.4.2 Bargaining Power of Buyers
4.4.3 Threat of Substitution
4.4.4 Threat of New Entrants
4.4.5 Competitive Rivalry
4.5 Global Microcristallina Cera Market Size & Forecast, 2018-2028
4.5.1 Microcristallina Cera Market Size and Y-o-Y Growth
4.5.2 Microcristallina Cera Market Absolute $ Opportunity
Chapter 5 Global Microcristallina Cera Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Microcristallina Cera Market Size Forecast by Type
5.2.1 75#
5.2.2 85#
5.2.3 90#
5.2.4 Others
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Microcristallina Cera Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Microcristallina Cera Market Size Forecast by Applications
6.2.1 Rubber industry
6.2.2 Explosive Industry
6.2.3 Cosmetic and Pharmaceutical
6.2.4 Food Industry
6.2.5 Resin Industry
6.2.6 Electronics Industry
6.2.7 Others
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Microcristallina Cera Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Microcristallina Cera Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Microcristallina Cera Analysis and Forecast
9.1 Introduction
9.2 North America Microcristallina Cera Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Microcristallina Cera Market Size Forecast by Type
9.6.1 75#
9.6.2 85#
9.6.3 90#
9.6.4 Others
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Microcristallina Cera Market Size Forecast by Applications
9.10.1 Rubber industry
9.10.2 Explosive Industry
9.10.3 Cosmetic and Pharmaceutical
9.10.4 Food Industry
9.10.5 Resin Industry
9.10.6 Electronics Industry
9.10.7 Others
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Microcristallina Cera Analysis and Forecast
10.1 Introduction
10.2 Europe Microcristallina Cera Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Microcristallina Cera Market Size Forecast by Type
10.6.1 75#
10.6.2 85#
10.6.3 90#
10.6.4 Others
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Microcristallina Cera Market Size Forecast by Applications
10.10.1 Rubber industry
10.10.2 Explosive Industry
10.10.3 Cosmetic and Pharmaceutical
10.10.4 Food Industry
10.10.5 Resin Industry
10.10.6 Electronics Industry
10.10.7 Others
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Microcristallina Cera Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Microcristallina Cera Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Microcristallina Cera Market Size Forecast by Type
11.6.1 75#
11.6.2 85#
11.6.3 90#
11.6.4 Others
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Microcristallina Cera Market Size Forecast by Applications
11.10.1 Rubber industry
11.10.2 Explosive Industry
11.10.3 Cosmetic and Pharmaceutical
11.10.4 Food Industry
11.10.5 Resin Industry
11.10.6 Electronics Industry
11.10.7 Others
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Microcristallina Cera Analysis and Forecast
12.1 Introduction
12.2 Latin America Microcristallina Cera Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Microcristallina Cera Market Size Forecast by Type
12.6.1 75#
12.6.2 85#
12.6.3 90#
12.6.4 Others
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Microcristallina Cera Market Size Forecast by Applications
12.10.1 Rubber industry
12.10.2 Explosive Industry
12.10.3 Cosmetic and Pharmaceutical
12.10.4 Food Industry
12.10.5 Resin Industry
12.10.6 Electronics Industry
12.10.7 Others
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Microcristallina Cera Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Microcristallina Cera Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Microcristallina Cera Market Size Forecast by Type
13.6.1 75#
13.6.2 85#
13.6.3 90#
13.6.4 Others
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Microcristallina Cera Market Size Forecast by Applications
13.10.1 Rubber industry
13.10.2 Explosive Industry
13.10.3 Cosmetic and Pharmaceutical
13.10.4 Food Industry
13.10.5 Resin Industry
13.10.6 Electronics Industry
13.10.7 Others
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Microcristallina Cera Market: Competitive Dashboard
14.2 Global Microcristallina Cera Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 A&A Fratelli Parodi
14.3.2 Qingdao Sinoplas Hi-New Material
14.3.3 Koster Keunen
14.3.4 Aiglon
14.3.5 Industrial Raw Materials
14.3.6 Jarchem Industries
14.3.7 The International Group
14.3.8 Paramelt
14.3.9 KahlWax
14.3.10 Sonneborn LLC
14.3.11 Multiceras
14.3.12 Kerax
14.3.13 Sasol
14.3.14 Strahl & Pitch
