Market Overview:
The global mixing nozzle for injection molding machines market is expected to grow at a CAGR of 5.5% during the forecast period from 2018 to 2030. The market growth can be attributed to the increasing demand for electronic circuits, vehicles, and architectural products. In addition, the growing packaging industry is also contributing to the growth of this market. Based on type, the global mixing nozzle for injection molding machines market can be segmented into SMN type and SMF type. The SMN type segment is expected to account for a larger share of the global market in 2018 owing to its high accuracy and precision in manufacturing products. By application, the global mixing nozzle for injection molding machines market can be divided into electronic circuit, vehicle, architecture, packing and others segments.
Product Definition:
A Mixing Nozzle for Injection Molding Machines is a component that is used to mix the molten plastic resin with the colorant or other additives before it is injected into the mold. The importance of a mixing nozzle is that it helps to ensure even distribution of color and other additives throughout the plastic, which can result in more consistent product quality.
SMN Type:
The SMN type mixing nozzle for injection molding machines is used to mix the feed material and the molten plastic in a precise proportion. It has advantages such as it can be adjusted while using, it has an easy cleaning system and also provides high mixing speed. The market size of this product is expected to expand rapidly due to its features mentioned above.
SMF Type:
Single-moving mold is a device used to form one piece of material at a time. It consists of two main parts, namely the platform and the mold. The materials are placed on the platform which is then lowered into the open end of the mold cavity. As soon as it comes in contact with material, it creates pressure which forces them into shape and also seals them from coming back out again.
Application Insights:
The architecture application segment led the global mixing nozzles for injection molding machines market in 2017 and is projected to witness significant growth over the forecast period. This can be attributed to growing construction activities in developing countries, such as India and China. In addition, technological advancements and innovations in building materials are also expected to drive the demand for architectural products globally.
Electronic circuit was another prominent segment that accounted for a share of 15.9% of the total revenue in 2017 owing to increasing demand from various end-use industries including consumer electronics, medical equipment & appliances among others.
Regional Analysis:
Asia Pacific dominated the global market in 2017 and is expected to continue its dominance over the forecast period. The region is home to some of the largest automotive, electronics, and architectural & engineering industries across the globe. China has emerged as a major player in this industry owing to low labor costs coupled with government support for domestic manufacturing activities.
The Asia Pacific economy also benefits from favorable demographics, which have resulted in an increase in household formation rates over recent years. This trend is projected to continue driving demand for consumer goods such as mixer nozzles over coming years.
Growth Factors:
- Increasing demand for plastic products from automotive and construction industries
- Growing awareness about the benefits of using injection molded parts over traditional methods
- Technological advancements in injection molding machines that offer better precision and efficiency
- Rising demand for customized plastic products to cater to specific needs of consumers
- Growing trend of mass customization in manufacturing sector
Scope Of The Report
Report Attributes
Report Details
Report Title
Mixing Nozzle for Injection Molding Machines Market Research Report
By Type
SMN Type, SMF Type
By Application
Electronic Circuit, Vehicle, Architecture, Packing
By Companies
Toray Engineering, Promix Solutions GmbH, StaMixCo, DME, Sulzer, Invotec Solutions
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
198
Number of Tables & Figures
139
Customization Available
Yes, the report can be customized as per your need.
Global Mixing Nozzle for Injection Molding Machines Market Report Segments:
The global Mixing Nozzle for Injection Molding Machines market is segmented on the basis of:
Types
SMN Type, SMF Type
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Electronic Circuit, Vehicle, Architecture, Packing
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- Toray Engineering
- Promix Solutions GmbH
- StaMixCo
- DME
- Sulzer
- Invotec Solutions
Highlights of The Mixing Nozzle for Injection Molding Machines Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- SMN Type
- SMF Type
- By Application:
- Electronic Circuit
- Vehicle
- Architecture
- Packing
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Mixing Nozzle for Injection Molding Machines Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
A mixing nozzle is a device that is used in injection molding machines to mix the molten plastic material and air.
Some of the major players in the mixing nozzle for injection molding machines market are Toray Engineering, Promix Solutions GmbH, StaMixCo, DME, Sulzer, Invotec Solutions.
The mixing nozzle for injection molding machines market is expected to grow at a compound annual growth rate of 5.5%.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Mixing Nozzle for Injection Molding Machines Market Overview 4.1 Introduction 4.1.1 Market Taxonomy 4.1.2 Market Definition 4.1.3 Macro-Economic Factors Impacting the Market Growth 4.2 Mixing Nozzle for Injection Molding Machines Market Dynamics 4.2.1 Market Drivers 4.2.2 Market Restraints 4.2.3 Market Opportunity 4.3 Mixing Nozzle for Injection Molding Machines Market - Supply Chain Analysis 4.3.1 List of Key Suppliers 4.3.2 List of Key Distributors 4.3.3 List of Key Consumers 4.4 Key Forces Shaping the Mixing Nozzle for Injection Molding Machines Market 4.4.1 Bargaining Power of Suppliers 4.4.2 Bargaining Power of Buyers 4.4.3 Threat of Substitution 4.4.4 Threat of New Entrants 4.4.5 Competitive Rivalry 4.5 Global Mixing Nozzle for Injection Molding Machines Market Size & Forecast, 2018-2028 4.5.1 Mixing Nozzle for Injection Molding Machines Market Size and Y-o-Y Growth 4.5.2 Mixing Nozzle for Injection Molding Machines Market Absolute $ Opportunity
Chapter 5 Global Mixing Nozzle for Injection Molding Machines Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Mixing Nozzle for Injection Molding Machines Market Size Forecast by Type
5.2.1 SMN Type
5.2.2 SMF Type
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Mixing Nozzle for Injection Molding Machines Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Mixing Nozzle for Injection Molding Machines Market Size Forecast by Applications
6.2.1 Electronic Circuit
6.2.2 Vehicle
6.2.3 Architecture
6.2.4 Packing
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Mixing Nozzle for Injection Molding Machines Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Mixing Nozzle for Injection Molding Machines Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Mixing Nozzle for Injection Molding Machines Analysis and Forecast
9.1 Introduction
9.2 North America Mixing Nozzle for Injection Molding Machines Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Mixing Nozzle for Injection Molding Machines Market Size Forecast by Type
9.6.1 SMN Type
9.6.2 SMF Type
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Mixing Nozzle for Injection Molding Machines Market Size Forecast by Applications
9.10.1 Electronic Circuit
9.10.2 Vehicle
9.10.3 Architecture
9.10.4 Packing
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Mixing Nozzle for Injection Molding Machines Analysis and Forecast
10.1 Introduction
10.2 Europe Mixing Nozzle for Injection Molding Machines Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Mixing Nozzle for Injection Molding Machines Market Size Forecast by Type
10.6.1 SMN Type
10.6.2 SMF Type
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Mixing Nozzle for Injection Molding Machines Market Size Forecast by Applications
10.10.1 Electronic Circuit
10.10.2 Vehicle
10.10.3 Architecture
10.10.4 Packing
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Mixing Nozzle for Injection Molding Machines Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Mixing Nozzle for Injection Molding Machines Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Mixing Nozzle for Injection Molding Machines Market Size Forecast by Type
11.6.1 SMN Type
11.6.2 SMF Type
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Mixing Nozzle for Injection Molding Machines Market Size Forecast by Applications
11.10.1 Electronic Circuit
11.10.2 Vehicle
11.10.3 Architecture
11.10.4 Packing
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Mixing Nozzle for Injection Molding Machines Analysis and Forecast
12.1 Introduction
12.2 Latin America Mixing Nozzle for Injection Molding Machines Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Mixing Nozzle for Injection Molding Machines Market Size Forecast by Type
12.6.1 SMN Type
12.6.2 SMF Type
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Mixing Nozzle for Injection Molding Machines Market Size Forecast by Applications
12.10.1 Electronic Circuit
12.10.2 Vehicle
12.10.3 Architecture
12.10.4 Packing
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Mixing Nozzle for Injection Molding Machines Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Mixing Nozzle for Injection Molding Machines Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Mixing Nozzle for Injection Molding Machines Market Size Forecast by Type
13.6.1 SMN Type
13.6.2 SMF Type
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Mixing Nozzle for Injection Molding Machines Market Size Forecast by Applications
13.10.1 Electronic Circuit
13.10.2 Vehicle
13.10.3 Architecture
13.10.4 Packing
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Mixing Nozzle for Injection Molding Machines Market: Competitive Dashboard
14.2 Global Mixing Nozzle for Injection Molding Machines Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 Toray Engineering
14.3.2 Promix Solutions GmbH
14.3.3 StaMixCo
14.3.4 DME
14.3.5 Sulzer
14.3.6 Invotec Solutions