Market Overview:
The global modified ABS plastics for helmet market is expected to grow at a CAGR of 5.5% during the forecast period from 2018 to 2030. The growth in this market can be attributed to the increasing demand for protective helmets from various end-use applications, such as e-bike helmets, electric motorcycle helmets, and e-scooter helmets. In addition, the growing awareness about safety among consumers is also contributing to the growth of this market. The global modified ABS plastics for helmet market can be segmented on the basis of type into ultra high impact type, high impact type, and medium impact type. The high impact type segment is expected to account for the largest share of the global modified ABS plastics for helmet market in 2018 owing to its superior properties such as toughness and strength over other types of plastic materials used in manufacturing protective helmets. On the basis of application,the global modified ABS plastics for helmetmarket can be divided into e-bike helmets, electric motorcycle helmets,, E-scooter Helmets,,andprotectivehelmet s .
Product Definition:
Modified ABS plastic is a type of plastic that has been modified to increase its strength and durability. This type of plastic is often used in the manufacturing of helmets, as it can withstand significant impact without breaking or shattering.
Ultra High Impact Type:
Modified Acrylonitrile Butadiene Styrene (MBS) is a thermoplastic polymer with ultra-high impact strength. It can be used to produce lightweight and rigid materials that are resistant to cracking, denting, and warping under extreme temperatures. MBS offers high stiffness at low weight along with excellent dimensional stability over a wide range of temperatures.
High Impact Type:
High impact type is a term used to define the force that causes a permanent deformation of the material it is applied to. The high-intensity impact usually results in plastic fracture and can be characterized by two types: low and high. Low-impact plastics do not break but deform permanently, while high-impact ones shatter into small pieces.
Application Insights:
The demand for the product is anticipated to increase owing to its ability to meet stringent safety requirements and high durability. The use of plastic in the production of e-bike helmets has resulted in reduced weight, improved aesthetics, and enhanced comfort. These factors are likely to propel demand over the forecast period.
E-scooter helmets manufactured using modified ABS plastics can be manufactured at a lower cost than that of steel counterparts while still maintaining high levels quality standards. This factor is expected to drive market growth over the forecast period as scooter manufacturers have been gradually moving away from traditional helmet materials towards cheaper alternatives such as modified ABS plastics due to their low prices and better performance characteristics when compared with traditional helmet materials such as polystyrene (PS) or fiberglass composite material (GCM).
Regional Analysis:
Asia Pacific dominated the global market in 2017. This is attributed to increasing sales of e-bikes and electric motorcycles in China, India, Japan, and South Korea. Furthermore, rising awareness regarding road safety coupled with stringent regulations on helmets by the government are expected to drive product demand over the forecast period. Europe accounted for a significant share of revenue in 2017 owing to high demand for protective headgear from countries including Germany, France Italy among others.
North America is expected to witness steady growth over the next eight years due to growing concerns about road accidents coupled with consumer preference towards quality products manufactured using sustainable materials such as ultra-high impact modified ABS plastics (UHIP). Moreover, presence of key manufacturers such as Rawlings LLC; Schuberth GmbH & Co KG; Arai Helmet Ltd.; and AGV Sport S.p A will also help boost regional growth over the forecast period (2018 - 2030).
Growth Factors:
- Increasing demand for helmets from the automotive and construction industries
- Growing popularity of sports such as cycling, skiing, and snowboarding
- Rising awareness about the benefits of using helmets for safety reasons
- Technological advancements in helmet manufacturing that result in better products
- Regulatory mandates requiring the use of helmets
Scope Of The Report
Report Attributes
Report Details
Report Title
Modified ABS Plastics for Helmet Market Research Report
By Type
Ultra High Impact Type, High Impact Type, Medium Impact Type
By Application
E-Bike Helmet, Electric Motorcycle Helmet, E-Scooter Helmet, Protective Helmet
By Companies
BASF, GE Plastics, Kumho Chemical, Mitsubishi Chemical, Techno Polymer, Mitsui Chemicals, Sumitomo, Dow Benelux, RenqiuXingda, Chi Mei Corporation., Bayer
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
139
Number of Tables & Figures
98
Customization Available
Yes, the report can be customized as per your need.
Global Modified ABS Plastics for Helmet Market Report Segments:
The global Modified ABS Plastics for Helmet market is segmented on the basis of:
Types
Ultra High Impact Type, High Impact Type, Medium Impact Type
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
E-Bike Helmet, Electric Motorcycle Helmet, E-Scooter Helmet, Protective Helmet
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- BASF
- GE Plastics
- Kumho Chemical
- Mitsubishi Chemical
- Techno Polymer
- Mitsui Chemicals
- Sumitomo
- Dow Benelux
- RenqiuXingda
- Chi Mei Corporation.
- Bayer
Highlights of The Modified ABS Plastics for Helmet Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- Ultra High Impact Type
- High Impact Type
- Medium Impact Type
- By Application:
- E-Bike Helmet
- Electric Motorcycle Helmet
- E-Scooter Helmet
- Protective Helmet
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Modified ABS Plastics for Helmet Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
Modified ABS plastics are used in the manufacture of helmets. Modified ABS is a type of plastic that has been treated to make it more resistant to impact and abrasion.
Some of the major companies in the modified abs plastics for helmet market are BASF, GE Plastics, Kumho Chemical, Mitsubishi Chemical, Techno Polymer, Mitsui Chemicals, Sumitomo, Dow Benelux, RenqiuXingda, Chi Mei Corporation., Bayer.
The modified abs plastics for helmet market is expected to grow at a compound annual growth rate of 5.5%.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Modified ABS Plastics for Helmet Market Overview
4.1 Introduction
4.1.1 Market Taxonomy
4.1.2 Market Definition
4.1.3 Macro-Economic Factors Impacting the Market Growth
4.2 Modified ABS Plastics for Helmet Market Dynamics
4.2.1 Market Drivers
4.2.2 Market Restraints
4.2.3 Market Opportunity
4.3 Modified ABS Plastics for Helmet Market - Supply Chain Analysis
4.3.1 List of Key Suppliers
4.3.2 List of Key Distributors
4.3.3 List of Key Consumers
4.4 Key Forces Shaping the Modified ABS Plastics for Helmet Market
4.4.1 Bargaining Power of Suppliers
4.4.2 Bargaining Power of Buyers
4.4.3 Threat of Substitution
4.4.4 Threat of New Entrants
4.4.5 Competitive Rivalry
4.5 Global Modified ABS Plastics for Helmet Market Size & Forecast, 2018-2028
4.5.1 Modified ABS Plastics for Helmet Market Size and Y-o-Y Growth
4.5.2 Modified ABS Plastics for Helmet Market Absolute $ Opportunity
Chapter 5 Global Modified ABS Plastics for Helmet Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Modified ABS Plastics for Helmet Market Size Forecast by Type
5.2.1 Ultra High Impact Type
5.2.2 High Impact Type
5.2.3 Medium Impact Type
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Modified ABS Plastics for Helmet Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Modified ABS Plastics for Helmet Market Size Forecast by Applications
6.2.1 E-Bike Helmet
6.2.2 Electric Motorcycle Helmet
6.2.3 E-Scooter Helmet
6.2.4 Protective Helmet
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Modified ABS Plastics for Helmet Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Modified ABS Plastics for Helmet Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Modified ABS Plastics for Helmet Analysis and Forecast
9.1 Introduction
9.2 North America Modified ABS Plastics for Helmet Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Modified ABS Plastics for Helmet Market Size Forecast by Type
9.6.1 Ultra High Impact Type
9.6.2 High Impact Type
9.6.3 Medium Impact Type
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Modified ABS Plastics for Helmet Market Size Forecast by Applications
9.10.1 E-Bike Helmet
9.10.2 Electric Motorcycle Helmet
9.10.3 E-Scooter Helmet
9.10.4 Protective Helmet
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Modified ABS Plastics for Helmet Analysis and Forecast
10.1 Introduction
10.2 Europe Modified ABS Plastics for Helmet Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Modified ABS Plastics for Helmet Market Size Forecast by Type
10.6.1 Ultra High Impact Type
10.6.2 High Impact Type
10.6.3 Medium Impact Type
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Modified ABS Plastics for Helmet Market Size Forecast by Applications
10.10.1 E-Bike Helmet
10.10.2 Electric Motorcycle Helmet
10.10.3 E-Scooter Helmet
10.10.4 Protective Helmet
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Modified ABS Plastics for Helmet Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Modified ABS Plastics for Helmet Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Modified ABS Plastics for Helmet Market Size Forecast by Type
11.6.1 Ultra High Impact Type
11.6.2 High Impact Type
11.6.3 Medium Impact Type
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Modified ABS Plastics for Helmet Market Size Forecast by Applications
11.10.1 E-Bike Helmet
11.10.2 Electric Motorcycle Helmet
11.10.3 E-Scooter Helmet
11.10.4 Protective Helmet
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Modified ABS Plastics for Helmet Analysis and Forecast
12.1 Introduction
12.2 Latin America Modified ABS Plastics for Helmet Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Modified ABS Plastics for Helmet Market Size Forecast by Type
12.6.1 Ultra High Impact Type
12.6.2 High Impact Type
12.6.3 Medium Impact Type
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Modified ABS Plastics for Helmet Market Size Forecast by Applications
12.10.1 E-Bike Helmet
12.10.2 Electric Motorcycle Helmet
12.10.3 E-Scooter Helmet
12.10.4 Protective Helmet
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Modified ABS Plastics for Helmet Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Modified ABS Plastics for Helmet Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Modified ABS Plastics for Helmet Market Size Forecast by Type
13.6.1 Ultra High Impact Type
13.6.2 High Impact Type
13.6.3 Medium Impact Type
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Modified ABS Plastics for Helmet Market Size Forecast by Applications
13.10.1 E-Bike Helmet
13.10.2 Electric Motorcycle Helmet
13.10.3 E-Scooter Helmet
13.10.4 Protective Helmet
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Modified ABS Plastics for Helmet Market: Competitive Dashboard
14.2 Global Modified ABS Plastics for Helmet Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 BASF
14.3.2 GE Plastics
14.3.3 Kumho Chemical
14.3.4 Mitsubishi Chemical
14.3.5 Techno Polymer
14.3.6 Mitsui Chemicals
14.3.7 Sumitomo
14.3.8 Dow Benelux
14.3.9 RenqiuXingda
14.3.10 Chi Mei Corporation.
14.3.11 Bayer
