Market Overview:
The global multi stage diaphragm compressor market is expected to grow at a CAGR of 5.5% during the forecast period from 2018 to 2030. The market growth can be attributed to the increasing demand for compressed air in various industrial applications, such as petrochemical, chemical, general industry, and others. Additionally, the growing demand for energy-efficient and reliable compressors is also propelling the growth of this market.
Product Definition:
A multi-stage compressor is a device used to increase the pressure of a fluid or gas. It comprises two or more compressor stages in series, each stage consisting of one or more compression chambers with inlet and outlet valves. Fluid enters the first stage, is compressed and then expelled. It then enters the second stage where it is compressed again and expelled. This process is repeated until the desired pressure is reached.
Less than 500Nm³/h:
500Nm³/h is the lowest limit for the torque requirement of a stage in multi-stage diaphragm compressor. It has been observed that 500Nm³/h is enough to start and stop gas turbine engines with ease. The 500nm/h mark is considered as an ideal standard where any device can perform efficiently without any problems or defects being reported.
500-1500Nm³/h:
500-1500Nm³/h is the range of viscosity for Multi Stage Diaphragm Compressor (MSDC) used in gas turbines. It represents the highest attainable flow rate at which a turbine can operate without risk of damage. The compressor is one of the most vital components in a gas turbine and its failure to operate efficiently results into low efficiency, increased emissions, and reduced performance.
Application Insights:
The general industry segment dominated the global multi stage diaphragm compressor market in terms of revenue share in 2017. The growth can be attributed to rising demand for compressors from various industries such as oil & gas, power generation, and construction among others. In addition, the availability of a wide range of products suitable for high-pressure applications is also expected to drive the product demand over the forecast period.
Petrochemical was another prominent application segment accounting for a significant market share in 2017 owing to increasing petrochemical projects across regions coupled with growing industrialization levels is expected to propel product demand over next seven years. However, changing regulatory scenario and policies regarding energy conservation are anticipated to create obstacles in new project approvals which may affect market growth negatively over the long term.
Regional Analysis:
Asia Pacific dominated the global market in 2017 and is expected to continue its dominance over the forecast period. The region is home to several emerging economies, including China, India, and Indonesia. Growing industrialization coupled with increasing investments in energy & power sector of Asia Pacific countries such as China and India are anticipated to drive the market growth over the forecast period.
The petrochemical industry of Middle East & Africa accounted for a share of more than 20% in 2017 owing to rising demand from domestic chemical industries along with growing oil production capacities across major countries such as Saudi Arabia and UAE are anticipated to boost product demand over next eight years.
North America was estimated at USD X million in 2017 due to high consumption rates observed for general industry applications across U.S.
Growth Factors:
- Increasing demand for compressed air in various industries
- Growing investments in manufacturing and processing sectors
- Rising adoption of energy-efficient technologies
- Proliferation of rental services for compressed air systems
- Technological advancements in multi stage diaphragm compressors
Scope Of The Report
Report Attributes
Report Details
Report Title
Multi Stage Diaphragm Compressor Market Research Report
By Type
Less than 500Nm³/h, 500-1500Nm³/h, More than 1500Nm³/h
By Application
Petrochemical, Chemical, General Industry, Others
By Companies
Howden, Sundyne, Sera GMBH, PDC Machines, Beijing Jingcheng, Andreas Hofer Hochdrucktechnik, Mehrer Compression, Mikuni Kikai Kogyo, Aoki Works, Beijing Huizhi, Fluitron
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
121
Number of Tables & Figures
85
Customization Available
Yes, the report can be customized as per your need.
Global Multi Stage Diaphragm Compressor Market Report Segments:
The global Multi Stage Diaphragm Compressor market is segmented on the basis of:
Types
Less than 500Nm³/h, 500-1500Nm³/h, More than 1500Nm³/h
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Petrochemical, Chemical, General Industry, Others
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- Howden
- Sundyne
- Sera GMBH
- PDC Machines
- Beijing Jingcheng
- Andreas Hofer Hochdrucktechnik
- Mehrer Compression
- Mikuni Kikai Kogyo
- Aoki Works
- Beijing Huizhi
- Fluitron
Highlights of The Multi Stage Diaphragm Compressor Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- Less than 500Nm³/h
- 500-1500Nm³/h
- More than 1500Nm³/h
- By Application:
- Petrochemical
- Chemical
- General Industry
- Others
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Multi Stage Diaphragm Compressor Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
Multi Stage Diaphragm Compressor is a type of compressor that has more than one stage. This allows the compressor to work more efficiently and effectively.
Some of the key players operating in the multi stage diaphragm compressor market are Howden, Sundyne, Sera GMBH, PDC Machines, Beijing Jingcheng, Andreas Hofer Hochdrucktechnik, Mehrer Compression, Mikuni Kikai Kogyo, Aoki Works, Beijing Huizhi, Fluitron.
The multi stage diaphragm compressor market is expected to grow at a compound annual growth rate of 5.5%.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Multi Stage Diaphragm Compressor Market Overview 4.1 Introduction 4.1.1 Market Taxonomy 4.1.2 Market Definition 4.1.3 Macro-Economic Factors Impacting the Market Growth 4.2 Multi Stage Diaphragm Compressor Market Dynamics 4.2.1 Market Drivers 4.2.2 Market Restraints 4.2.3 Market Opportunity 4.3 Multi Stage Diaphragm Compressor Market - Supply Chain Analysis 4.3.1 List of Key Suppliers 4.3.2 List of Key Distributors 4.3.3 List of Key Consumers 4.4 Key Forces Shaping the Multi Stage Diaphragm Compressor Market 4.4.1 Bargaining Power of Suppliers 4.4.2 Bargaining Power of Buyers 4.4.3 Threat of Substitution 4.4.4 Threat of New Entrants 4.4.5 Competitive Rivalry 4.5 Global Multi Stage Diaphragm Compressor Market Size & Forecast, 2020-2028 4.5.1 Multi Stage Diaphragm Compressor Market Size and Y-o-Y Growth 4.5.2 Multi Stage Diaphragm Compressor Market Absolute $ Opportunity
Chapter 5 Global Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Market Size Forecast by Type
5.2.1 Less than 500Nm³/h
5.2.2 500-1500Nm³/h
5.2.3 More than 1500Nm³/h
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Market Size Forecast by Applications
6.2.1 Petrochemical
6.2.2 Chemical
6.2.3 General Industry
6.2.4 Others
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Multi Stage Diaphragm Compressor Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Multi Stage Diaphragm Compressor Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Analysis and Forecast
9.1 Introduction
9.2 North America Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Market Size Forecast by Type
9.6.1 Less than 500Nm³/h
9.6.2 500-1500Nm³/h
9.6.3 More than 1500Nm³/h
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Market Size Forecast by Applications
9.10.1 Petrochemical
9.10.2 Chemical
9.10.3 General Industry
9.10.4 Others
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Analysis and Forecast
10.1 Introduction
10.2 Europe Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Market Size Forecast by Type
10.6.1 Less than 500Nm³/h
10.6.2 500-1500Nm³/h
10.6.3 More than 1500Nm³/h
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Market Size Forecast by Applications
10.10.1 Petrochemical
10.10.2 Chemical
10.10.3 General Industry
10.10.4 Others
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Market Size Forecast by Type
11.6.1 Less than 500Nm³/h
11.6.2 500-1500Nm³/h
11.6.3 More than 1500Nm³/h
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Market Size Forecast by Applications
11.10.1 Petrochemical
11.10.2 Chemical
11.10.3 General Industry
11.10.4 Others
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Analysis and Forecast
12.1 Introduction
12.2 Latin America Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Market Size Forecast by Type
12.6.1 Less than 500Nm³/h
12.6.2 500-1500Nm³/h
12.6.3 More than 1500Nm³/h
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Market Size Forecast by Applications
12.10.1 Petrochemical
12.10.2 Chemical
12.10.3 General Industry
12.10.4 Others
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Market Size Forecast by Type
13.6.1 Less than 500Nm³/h
13.6.2 500-1500Nm³/h
13.6.3 More than 1500Nm³/h
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Market Size Forecast by Applications
13.10.1 Petrochemical
13.10.2 Chemical
13.10.3 General Industry
13.10.4 Others
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Multi Stage Diaphragm Compressor Market: Competitive Dashboard
14.2 Global Multi Stage Diaphragm Compressor Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 Howden
14.3.2 Sundyne
14.3.3 Sera GMBH
14.3.4 PDC Machines
14.3.5 Beijing Jingcheng
14.3.6 Andreas Hofer Hochdrucktechnik
14.3.7 Mehrer Compression
14.3.8 Mikuni Kikai Kogyo
14.3.9 Aoki Works
14.3.10 Beijing Huizhi
14.3.11 Fluitron