Market Overview:
The Global Multicouplers Market is expected to grow at a CAGR of 5.5% during the forecast period from 2018 to 2030. The market growth can be attributed to the increasing demand for multicouplers in various applications such as rack mount, module with connector, and cavity mount. Additionally, the growing demand for multicouplers from North America and Europe is also contributing to the market growth. However, factors such as limited product differentiation and high cost of multicouplers are restraining the market growth.
Product Definition:
A multicoupler is a device that allows two or more signals to be combined or split into separate paths. Multicouplers are often used in RF and microwave systems to combine or split signals from multiple antennas, amplifiers, or receivers.
1 Port:
1 port is a device that allows one-way communication between two devices. It can be used in various applications such as data acquisition and control, instrumentation, medical equipment monitoring or control system etc. The 1 port market has witnessed significant growth over the past few years owing to its wide range of application and cost effective nature.
Increasing demand for digital technology coupled with growing need for automation across industries is expected to drive the market over the forecast period.
2 Port:
2-port is a type of semiconductor device used in the manufacture of multiple couplers. It consists of two independent channels, one for input and other for output. The 2-port can be used as an isolator or a switch depending upon its application.
The major advantage associated with this device is that it provides isolation between different circuits or systems which are connected to the circuit board by means of banana plugs, spade lugs, etc.
Application Insights:
Based on the application, the global multicouplers market has been segmented into rack mount, module with connector, cavity mount and others. The cavity mount application is expected to witness significant growth over the forecast period owing to its increasing adoption in various end-use industries such as data centers and telecom. Module with Connector is estimated to be the fastest growing application segment during the forecast period owing to its ability of high density connections which provides flexibility in design choice for system architects. Cavity Mount applications are widely used for industrial purposes such as HVACR & refrigeration where high power efficiency is required along with compact size and low profile installation option.
Regional Analysis:
Asia Pacific is expected to be the fastest-growing market for global multicouplers, with a CAGR of XX% from 2018 to 2030 owing to increasing demand for electronics in this region. The growth can be attributed to the presence of key players such as Siemens AG, Alstom Grid Ltd., and General Electric with manufacturing facilities in this region.
The Asia Pacific was followed by Europe which accounted for over 25% of the overall revenue share in 2017 owing to high product demand from countries including Germany and France that are heavily invested in renewable energy projects using grid-scale batteries. North America is also likely have a positive outlook towards growth over the forecast period due to rising emphasis on reducing carbon footprint coupled with growing need for clean energy storage solutions across various sectors such as transportation, power distribution & generation, etc.
Growth Factors:
- Increasing demand for multicouplers in communication and networking applications
- Growing number of wireless devices and networks
- Proliferation of 4G/LTE networks
- Rising demand for miniaturized multicouplers
- Growing popularity of cloud-based services
Scope Of The Report
Report Attributes
Report Details
Report Title
Multicouplers Market Research Report
By Type
1 Port, 2 Port, 3 Port, 4 Port, 6 Port, 8 Port
By Application
Rack Mount, Module with Connector, Cavity Mount
By Companies
Bird Technologies, Comprod, EMR Corporation, I.F. Engineering, Mu-Del Electronics, PROCOM A/S, RFI Wireless, Sinclair Technologies, Stancom, Stridsberg Engineering, Bird Technologies, Tron, TSL
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
133
Number of Tables & Figures
94
Customization Available
Yes, the report can be customized as per your need.
Global Multicouplers Market Report Segments:
The global Multicouplers market is segmented on the basis of:
Types
1 Port, 2 Port, 3 Port, 4 Port, 6 Port, 8 Port
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Rack Mount, Module with Connector, Cavity Mount
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- Bird Technologies
- Comprod
- EMR Corporation
- I.F. Engineering
- Mu-Del Electronics
- PROCOM A/S
- RFI Wireless
- Sinclair Technologies
- Stancom
- Stridsberg Engineering
- Bird Technologies
- Tron
- TSL
Highlights of The Multicouplers Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- 1 Port
- 2 Port
- 3 Port
- 4 Port
- 6 Port
- 8 Port
- By Application:
- Rack Mount
- Module with Connector
- Cavity Mount
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Multicouplers Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
Multicouplers are devices that allow two or more signals to be combined and sent as one. This can be useful for, for example, combining audio and video signals into a single stream.
Some of the major players in the multicouplers market are Bird Technologies, Comprod, EMR Corporation, I.F. Engineering, Mu-Del Electronics, PROCOM A/S, RFI Wireless, Sinclair Technologies, Stancom, Stridsberg Engineering, Bird Technologies, Tron, TSL.
The multicouplers market is expected to grow at a compound annual growth rate of 5.5%.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Multicouplers Market Overview 4.1 Introduction 4.1.1 Market Taxonomy 4.1.2 Market Definition 4.1.3 Macro-Economic Factors Impacting the Market Growth 4.2 Multicouplers Market Dynamics 4.2.1 Market Drivers 4.2.2 Market Restraints 4.2.3 Market Opportunity 4.3 Multicouplers Market - Supply Chain Analysis 4.3.1 List of Key Suppliers 4.3.2 List of Key Distributors 4.3.3 List of Key Consumers 4.4 Key Forces Shaping the Multicouplers Market 4.4.1 Bargaining Power of Suppliers 4.4.2 Bargaining Power of Buyers 4.4.3 Threat of Substitution 4.4.4 Threat of New Entrants 4.4.5 Competitive Rivalry 4.5 Global Multicouplers Market Size & Forecast, 2020-2028 4.5.1 Multicouplers Market Size and Y-o-Y Growth 4.5.2 Multicouplers Market Absolute $ Opportunity
Chapter 5 Global Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Market Size Forecast by Type
5.2.1 1 Port
5.2.2 2 Port
5.2.3 3 Port
5.2.4 4 Port
5.2.5 6 Port
5.2.6 8 Port
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Market Size Forecast by Applications
6.2.1 Rack Mount
6.2.2 Module with Connector
6.2.3 Cavity Mount
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Multicouplers Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Multicouplers Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Analysis and Forecast
9.1 Introduction
9.2 North America Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Market Size Forecast by Type
9.6.1 1 Port
9.6.2 2 Port
9.6.3 3 Port
9.6.4 4 Port
9.6.5 6 Port
9.6.6 8 Port
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Market Size Forecast by Applications
9.10.1 Rack Mount
9.10.2 Module with Connector
9.10.3 Cavity Mount
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Analysis and Forecast
10.1 Introduction
10.2 Europe Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Market Size Forecast by Type
10.6.1 1 Port
10.6.2 2 Port
10.6.3 3 Port
10.6.4 4 Port
10.6.5 6 Port
10.6.6 8 Port
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Market Size Forecast by Applications
10.10.1 Rack Mount
10.10.2 Module with Connector
10.10.3 Cavity Mount
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Market Size Forecast by Type
11.6.1 1 Port
11.6.2 2 Port
11.6.3 3 Port
11.6.4 4 Port
11.6.5 6 Port
11.6.6 8 Port
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Market Size Forecast by Applications
11.10.1 Rack Mount
11.10.2 Module with Connector
11.10.3 Cavity Mount
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Analysis and Forecast
12.1 Introduction
12.2 Latin America Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Market Size Forecast by Type
12.6.1 1 Port
12.6.2 2 Port
12.6.3 3 Port
12.6.4 4 Port
12.6.5 6 Port
12.6.6 8 Port
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Market Size Forecast by Applications
12.10.1 Rack Mount
12.10.2 Module with Connector
12.10.3 Cavity Mount
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Market Size Forecast by Type
13.6.1 1 Port
13.6.2 2 Port
13.6.3 3 Port
13.6.4 4 Port
13.6.5 6 Port
13.6.6 8 Port
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Market Size Forecast by Applications
13.10.1 Rack Mount
13.10.2 Module with Connector
13.10.3 Cavity Mount
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Multicouplers Market: Competitive Dashboard
14.2 Global Multicouplers Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 Bird Technologies
14.3.2 Comprod
14.3.3 EMR Corporation
14.3.4 I.F. Engineering
14.3.5 Mu-Del Electronics
14.3.6 PROCOM A/S
14.3.7 RFI Wireless
14.3.8 Sinclair Technologies
14.3.9 Stancom
14.3.10 Stridsberg Engineering
14.3.11 Bird Technologies
14.3.12 Tron
14.3.13 TSL