Market Overview:
The global pentane 60/40 market is expected to grow at a CAGR of 5.5% during the forecast period from 2018 to 2030. The growth in the market can be attributed to the increasing demand for pentane 60/40 in various applications such as EPS blowing agent, electronic cleaning, chemical solvent, aerosol propellant and others. In terms of type, the chemical grade segment is expected to hold a major share of the global pentane 60/40 market during the forecast period. This can be attributed to its growing demand from various end-use industries such as electronics and chemicals.
Product Definition:
Pentane 60/40 is a mixture of two components, pentane and heptane. Pentane has a boiling point of 36 degrees Celsius and heptane has a boiling point of 98 degrees Celsius. The mixture is used as an industrial solvent.
Chemical Grade:
Chemical grade is a product that has been characterized and tested for its chemical and physical properties. It's major application in the Pentane 60/40 market is as a solvent. Chemical grade pentane has applications in various end-use industries such as pharmaceuticals, cosmetics, research chemicals, etc.
Industrial Grade:
Industrial grade is a special type of gasoline that has been processed to remove all impurities. It is also known as straight run or cut-stock gasoline. The major difference between it and regular grades is that the latter contains additives such as ethanol, methyl tertiary-butyl ether (MTBE) and other aromatics to improve octane rating.
Application Insights:
Electronic cleaning was the largest application segment in terms of volume and revenue in 2017. The product is widely used as an electronic cleaning solvent due to its properties, such as low toxicity and non-flammability. Electronic components such as semiconductor devices, resistors, capacitors are made of various materials including polymers, metals & alloys which make them work properly. However, some contaminants can get attached to these electronic components making them sluggish or cause damage if not cleaned properly.
Regional Analysis:
Asia Pacific is anticipated to be the fastest-growing regional market with a CAGR of XX% from 2018 to 2030 owing to increasing industrialization and rapid urbanization in emerging economies, such as China and India. In addition, rising disposable income coupled with increased spending on electronic products is expected to drive the regional market over the forecast period.
North America was estimated as one of the largest markets for pentane 60/40 in 2017 owing to high demand from end-use industries including electronics, automotive, construction and manufacturing. The region has strict regulations regarding VOC emissions which have resulted in high demand for organic solvents across various applications including paints & coatings removal equipment maintenance etc., thus driving product consumption across this region since past few years.
Growth Factors:
- Increasing demand from end-use industries such as transportation, packaging, and adhesives
- Rising production of shale gas in the United States
- Growing use of pentane 60/40 as a fuel additive to improve fuel economy and reduce emissions
- Increasing investment in petrochemical projects globally
- Technological advancements that lead to increased efficiency and reduced environmental impact
Scope Of The Report
Report Attributes
Report Details
Report Title
Pentane 60/40 Market Research Report
By Type
Chemical Grade, Industrial Grade
By Application
EPS Blowing Agent, Electronic Cleaning, Chemical Solvent, Aerosol Propellant, Others
By Companies
Shell, Phillips 66, CNPC, ExxonMobil Chemical, TOP Solvent, Junyuan Petroleum Group, South Hampton Resources, Aeropres Corporation, Diversified CPC, Rizhao Changlian, Shell
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
156
Number of Tables & Figures
110
Customization Available
Yes, the report can be customized as per your need.
Global Pentane 60/40 Market Report Segments:
The global Pentane 60/40 market is segmented on the basis of:
Types
Chemical Grade, Industrial Grade
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
EPS Blowing Agent, Electronic Cleaning, Chemical Solvent, Aerosol Propellant, Others
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- Shell
- Phillips 66
- CNPC
- ExxonMobil Chemical
- TOP Solvent
- Junyuan Petroleum Group
- South Hampton Resources
- Aeropres Corporation
- Diversified CPC
- Rizhao Changlian
- Shell
Highlights of The Pentane 60/40 Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- Chemical Grade
- Industrial Grade
- By Application:
- EPS Blowing Agent
- Electronic Cleaning
- Chemical Solvent
- Aerosol Propellant
- Others
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Pentane 60/40 Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
Pentane 60/40 is a fuel mixture that consists of 60% gasoline and 40% pentane. It is most commonly used in small engines, such as lawnmowers and weed whackers, because it provides good power and low emissions.
Some of the key players operating in the pentane 60/40 market are Shell, Phillips 66, CNPC, ExxonMobil Chemical, TOP Solvent, Junyuan Petroleum Group, South Hampton Resources, Aeropres Corporation, Diversified CPC, Rizhao Changlian, Shell.
The pentane 60/40 market is expected to register a CAGR of 5.5%.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Pentane 60/40 Market Overview 4.1 Introduction 4.1.1 Market Taxonomy 4.1.2 Market Definition 4.1.3 Macro-Economic Factors Impacting the Market Growth 4.2 Pentane 60/40 Market Dynamics 4.2.1 Market Drivers 4.2.2 Market Restraints 4.2.3 Market Opportunity 4.3 Pentane 60/40 Market - Supply Chain Analysis 4.3.1 List of Key Suppliers 4.3.2 List of Key Distributors 4.3.3 List of Key Consumers 4.4 Key Forces Shaping the Pentane 60/40 Market 4.4.1 Bargaining Power of Suppliers 4.4.2 Bargaining Power of Buyers 4.4.3 Threat of Substitution 4.4.4 Threat of New Entrants 4.4.5 Competitive Rivalry 4.5 Global Pentane 60/40 Market Size & Forecast, 2020-2028 4.5.1 Pentane 60/40 Market Size and Y-o-Y Growth 4.5.2 Pentane 60/40 Market Absolute $ Opportunity
Chapter 5 Global Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Market Size Forecast by Type
5.2.1 Chemical Grade
5.2.2 Industrial Grade
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Market Size Forecast by Applications
6.2.1 EPS Blowing Agent
6.2.2 Electronic Cleaning
6.2.3 Chemical Solvent
6.2.4 Aerosol Propellant
6.2.5 Others
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Pentane 60/40 Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Pentane 60/40 Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Analysis and Forecast
9.1 Introduction
9.2 North America Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Market Size Forecast by Type
9.6.1 Chemical Grade
9.6.2 Industrial Grade
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Market Size Forecast by Applications
9.10.1 EPS Blowing Agent
9.10.2 Electronic Cleaning
9.10.3 Chemical Solvent
9.10.4 Aerosol Propellant
9.10.5 Others
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Analysis and Forecast
10.1 Introduction
10.2 Europe Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Market Size Forecast by Type
10.6.1 Chemical Grade
10.6.2 Industrial Grade
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Market Size Forecast by Applications
10.10.1 EPS Blowing Agent
10.10.2 Electronic Cleaning
10.10.3 Chemical Solvent
10.10.4 Aerosol Propellant
10.10.5 Others
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Market Size Forecast by Type
11.6.1 Chemical Grade
11.6.2 Industrial Grade
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Market Size Forecast by Applications
11.10.1 EPS Blowing Agent
11.10.2 Electronic Cleaning
11.10.3 Chemical Solvent
11.10.4 Aerosol Propellant
11.10.5 Others
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Analysis and Forecast
12.1 Introduction
12.2 Latin America Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Market Size Forecast by Type
12.6.1 Chemical Grade
12.6.2 Industrial Grade
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Market Size Forecast by Applications
12.10.1 EPS Blowing Agent
12.10.2 Electronic Cleaning
12.10.3 Chemical Solvent
12.10.4 Aerosol Propellant
12.10.5 Others
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Market Size Forecast by Type
13.6.1 Chemical Grade
13.6.2 Industrial Grade
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Market Size Forecast by Applications
13.10.1 EPS Blowing Agent
13.10.2 Electronic Cleaning
13.10.3 Chemical Solvent
13.10.4 Aerosol Propellant
13.10.5 Others
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Pentane 60/40 Market: Competitive Dashboard
14.2 Global Pentane 60/40 Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 Shell
14.3.2 Phillips 66
14.3.3 CNPC
14.3.4 ExxonMobil Chemical
14.3.5 TOP Solvent
14.3.6 Junyuan Petroleum Group
14.3.7 South Hampton Resources
14.3.8 Aeropres Corporation
14.3.9 Diversified CPC
14.3.10 Rizhao Changlian
14.3.11 Shell