Market Overview:
The global pervious concrete market is expected to grow at a CAGR of 5.5% from 2018 to 2030. The growth in the market can be attributed to the increasing demand for green infrastructure and rising awareness about the benefits of pervious concrete. In terms of type, the market is segmented into low porosity and high porosity segments. Low porosity segment is expected to dominate the market during the forecast period owing to its high strength properties.
Product Definition:
Pervious concrete is a paving material that allows water to seep through it to the ground below. This helps reduce surface runoff and flooding, while also promoting groundwater recharge.
20% ± 5% Voids(Low Porosity, High Strength):
20% ± 5% voids are present in most of the concrete structures. These voids act as pathways for water and air, which results in enhanced performance of the concrete. The 20% ± 5% Void (Low Porosity, High Strength) concept is relatively new and has been gaining acceptance over the past few years.
30% ± 5% Voids(High Porosity, Low Strength):
30% ± 5% voids are small holes or spaces between the cement particles and they allow water to pass through which results in high porosity. High porous concrete has many advantages such as it is lightweight, easy to install, cost effective and can be built in a short time. It also helps reduce carbon dioxide emission which is beneficial for environment.
Application Insights:
Highways was the largest application segment in the global pervious concrete market and accounted for a revenue share of more than 40% in 2017. Perviousconcrete is used as an alternative to asphaltic surfacing on highways, as it provides a cost-effective solution while improving aesthetics. The product helps reduce traffic accidents by reducing driver distraction due to its high visibility characteristics.
Perviousconcrete can also be used for parking areas, driveways and sidewalks where strong structural support is required along with enhanced aesthetic appeal. It offers benefits such as reduced maintenance costs, increased lifespan of infrastructure components along with improved surface quality when compared to conventional paving solutions such as asphalt or concrete slabs. Increasing urbanization has led to an increase in the number of residential buildings which requires pavements for access roads and walkways near housing complexes or apartment buildings thereby driving the demand for pervious concrete products over the forecast period.
Regional Analysis:
Asia Pacific dominated the global pervious concrete market in terms of both volume and revenue. The region is expected to witness significant growth over the forecast period owing to increasing construction activities, especially in developing countries such as China and India. In addition, growing population coupled with rising disposable income will drive demand for residential buildings which will further propel industry growth.
The European market was valued at USD X million in 2017 and is anticipated to grow at a CAGR of XX% from 2018 to 2030 owing to high product demand from several major application sectors including highways, parking areas, driveways & sidewalks as well as other applications that include green building design elements and water conservation features for new construction projects across the region.
Growth Factors:
- Increasing demand for green infrastructure: Pervious concrete is an important part of green infrastructure, which helps in managing storm water and improving air quality. The growing awareness about the benefits of green infrastructure is expected to drive the growth of the pervious concrete market.
- Rising investments in transportation sector: The transportation sector accounts for a significant share of global emissions. Governments are investing heavily in sustainable transport solutions such as pervious concrete to reduce emissions and improve air quality. This is expected to boost the growth of the pervious concrete market in the coming years.
- Growing demand from construction industry: Pervious concrete has gained popularity among construction professionals due to its ability to manage storm water runoff effectively while reducing construction time and costs significantly compared to traditional paving methods such as asphalt or tar-and-gravel pavements .The growing demand for pervious concrete from the construction industry is expected to drive its growth in future years..
Scope Of The Report
Report Attributes
Report Details
Report Title
Pervious Concrete Market Research Report
By Type
20% ± 5% Voids(Low Porosity, High Strength), 30% ± 5% Voids(High Porosity, Low Strength)
By Application
Highways, Parking Areas, Driveways, Sidewalks, Others
By Companies
Chaney Enterprises, CEMEX, Empire Blended Products, Geofill, Lafargeholcim Ltd, CRH PLC, Sika AG, Ultratech Cement Limited, Boral Limited
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
184
Number of Tables & Figures
129
Customization Available
Yes, the report can be customized as per your need.
Global Pervious Concrete Market Report Segments:
The global Pervious Concrete market is segmented on the basis of:
Types
20% ± 5% Voids(Low Porosity, High Strength), 30% ± 5% Voids(High Porosity, Low Strength)
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Highways, Parking Areas, Driveways, Sidewalks, Others
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- Chaney Enterprises
- CEMEX
- Empire Blended Products
- Geofill
- Lafargeholcim Ltd
- CRH PLC
- Sika AG
- Ultratech Cement Limited
- Boral Limited
Highlights of The Pervious Concrete Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- 20% ± 5% Voids(Low Porosity, High Strength)
- 30% ± 5% Voids(High Porosity, Low Strength)
- By Application:
- Highways
- Parking Areas
- Driveways
- Sidewalks
- Others
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Pervious Concrete Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
Pervious concrete is a type of concrete that has been designed to allow water and other liquids to flow through the material. This makes it an ideal choice for areas where moisture is a concern, such as in basements or crawl spaces. Pervious concrete also offers some benefits over traditional concrete, including reduced noise and vibration levels due to its permeability.
Some of the major players in the pervious concrete market are Chaney Enterprises, CEMEX, Empire Blended Products, Geofill, Lafargeholcim Ltd, CRH PLC, Sika AG, Ultratech Cement Limited, Boral Limited.
The pervious concrete market is expected to register a CAGR of 5.5%.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Pervious Concrete Market Overview
4.1 Introduction
4.1.1 Market Taxonomy
4.1.2 Market Definition
4.1.3 Macro-Economic Factors Impacting the Market Growth
4.2 Pervious Concrete Market Dynamics
4.2.1 Market Drivers
4.2.2 Market Restraints
4.2.3 Market Opportunity
4.3 Pervious Concrete Market - Supply Chain Analysis
4.3.1 List of Key Suppliers
4.3.2 List of Key Distributors
4.3.3 List of Key Consumers
4.4 Key Forces Shaping the Pervious Concrete Market
4.4.1 Bargaining Power of Suppliers
4.4.2 Bargaining Power of Buyers
4.4.3 Threat of Substitution
4.4.4 Threat of New Entrants
4.4.5 Competitive Rivalry
4.5 Global Pervious Concrete Market Size & Forecast, 2020-2028
4.5.1 Pervious Concrete Market Size and Y-o-Y Growth
4.5.2 Pervious Concrete Market Absolute $ Opportunity
Chapter 5 Global Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Market Size Forecast by Type
5.2.1 20% ± 5% Voids(Low Porosity
5.2.2 High Strength)
5.2.3 30% ± 5% Voids(High Porosity
5.2.4 Low Strength)
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Market Size Forecast by Applications
6.2.1 Highways
6.2.2 Parking Areas
6.2.3 Driveways
6.2.4 Sidewalks
6.2.5 Others
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Pervious Concrete Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Pervious Concrete Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Analysis and Forecast
9.1 Introduction
9.2 North America Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Market Size Forecast by Type
9.6.1 20% ± 5% Voids(Low Porosity
9.6.2 High Strength)
9.6.3 30% ± 5% Voids(High Porosity
9.6.4 Low Strength)
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Market Size Forecast by Applications
9.10.1 Highways
9.10.2 Parking Areas
9.10.3 Driveways
9.10.4 Sidewalks
9.10.5 Others
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Analysis and Forecast
10.1 Introduction
10.2 Europe Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Market Size Forecast by Type
10.6.1 20% ± 5% Voids(Low Porosity
10.6.2 High Strength)
10.6.3 30% ± 5% Voids(High Porosity
10.6.4 Low Strength)
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Market Size Forecast by Applications
10.10.1 Highways
10.10.2 Parking Areas
10.10.3 Driveways
10.10.4 Sidewalks
10.10.5 Others
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Market Size Forecast by Type
11.6.1 20% ± 5% Voids(Low Porosity
11.6.2 High Strength)
11.6.3 30% ± 5% Voids(High Porosity
11.6.4 Low Strength)
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Market Size Forecast by Applications
11.10.1 Highways
11.10.2 Parking Areas
11.10.3 Driveways
11.10.4 Sidewalks
11.10.5 Others
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Analysis and Forecast
12.1 Introduction
12.2 Latin America Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Market Size Forecast by Type
12.6.1 20% ± 5% Voids(Low Porosity
12.6.2 High Strength)
12.6.3 30% ± 5% Voids(High Porosity
12.6.4 Low Strength)
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Market Size Forecast by Applications
12.10.1 Highways
12.10.2 Parking Areas
12.10.3 Driveways
12.10.4 Sidewalks
12.10.5 Others
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Market Size Forecast by Type
13.6.1 20% ± 5% Voids(Low Porosity
13.6.2 High Strength)
13.6.3 30% ± 5% Voids(High Porosity
13.6.4 Low Strength)
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Market Size Forecast by Applications
13.10.1 Highways
13.10.2 Parking Areas
13.10.3 Driveways
13.10.4 Sidewalks
13.10.5 Others
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Pervious Concrete Market: Competitive Dashboard
14.2 Global Pervious Concrete Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 Chaney Enterprises
14.3.2 CEMEX
14.3.3 Empire Blended Products
14.3.4 Geofill
14.3.5 Lafargeholcim Ltd
14.3.6 CRH PLC
14.3.7 Sika AG
14.3.8 Ultratech Cement Limited
14.3.9 Boral Limited
