Market Overview:
The global piping and plumbing fitting market is expected to grow at a CAGR of 5.5% from 2018 to 2030. The growth in the market can be attributed to the increasing demand for water, gas, and liquid waste applications across the globe. In addition, the growing construction industry is also fueling the demand for piping and plumbing fittings. Copper fittings are expected to dominate the market during the forecast period owing to their properties such as corrosion resistance and durability.
Product Definition:
Piping and plumbing fittings are used to connect pipes and tubing together. They are usually made from metal, plastic, or fiberglass. The fittings allow water to flow through the pipes and tubing, which can be used for a variety of purposes, such as drinking water, irrigation, or wastewater removal.
Copper:
Copper is a soft, malleable metal that is strong enough to be used in plumbing fittings and piping. It has good electrical and thermal conductivity, high strength, corrosion resistance & excellent mechanical properties. These factors make it suitable for use in various industries such as oil & gas; power generation; water treatment; aerospace & defense industry etc.
Iron:
Iron is a metal and it can be obtained from mining or smelting. It has high thermal, electrical, and magnetic conductivity. Iron pipe fittings are used in water plumbing for carrying hot and cold water to the taps as well as for other applications such as hydronic heating systems.
Application Insights:
The global market is segmented by application into water, gas and liquid waste. The water application dominated the overall industry in terms of revenue share at over 40% in 2017. Copper piping systems are widely used for water applications as they are lightweight and easy to install. However, iron fittings are preferred for plumbing purposes as they offer higher resistance against corrosion and scaling than their counterparts made from copper alloys or steel alloys do.
Liquid waste is an important aspect of modern urban life that has not been addressed adequately by any existing infrastructure facilities even after decades since the inception of modern urban lifestyle in developing countries like India, China etcetera.
Regional Analysis:
Asia Pacific was the leading regional market in 2017 and is expected to continue its dominance over the forecast period. The growth of this region can be attributed to increasing construction activities in emerging economies, such as China and India. In addition, rising population coupled with growing demand for consumer goods has led to an increase in residential and commercial constructions which will further drive product demand.
Europe accounted for a significant share of global piping & plumbing fitting industry due to high investments made by governments towards infrastructure development especially focusing on water supply & sanitation sector is anticipated to boost product demand over the forecast period. North America also held a substantial share owing to presence of prominent players operating within this region along with high awareness regarding energy conservation resulting into increased spending on energy efficiency products such as heat exchangers, flushers etc.
Growth Factors:
- Increasing demand from construction and infrastructure sector
- Rapid urbanization and industrialization in emerging economies
- Growing awareness about energy conservation and green buildings
- Rising demand for plumbing fixtures in luxury hotels, hospitals, and other commercial establishments
- Technological advancements that lead to the development of new products
Scope Of The Report
Report Attributes
Report Details
Report Title
Piping and Plumbing Fitting Market Research Report
By Type
Copper, Iron
By Application
Water, Gas, Liquid Waste
By Companies
SharkBite, Charlotte Pipe, Everbilt, Apollo, HOME-FLEX, Ford Meter Box, Mueller Company, Victaulic, A.Y. McDonald, Romac Industries, Smith Blair Inc, Tyler Union, Multi-Fittings Corporation, GPK, Jones Stephens, Sioux Chief, Advanced Drainage Systems, James Jones Company, Apollo Conbraco, Fernco
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
146
Number of Tables & Figures
103
Customization Available
Yes, the report can be customized as per your need.
Global Piping and Plumbing Fitting Market Report Segments:
The global Piping and Plumbing Fitting market is segmented on the basis of:
Types
Copper, Iron
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Water, Gas, Liquid Waste
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- SharkBite
- Charlotte Pipe
- Everbilt
- Apollo
- HOME-FLEX
- Ford Meter Box
- Mueller Company
- Victaulic
- A.Y. McDonald
- Romac Industries
- Smith Blair Inc
- Tyler Union
- Multi-Fittings Corporation
- GPK
- Jones Stephens
- Sioux Chief
- Advanced Drainage Systems
- James Jones Company
- Apollo Conbraco
- Fernco
Highlights of The Piping and Plumbing Fitting Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- Copper
- Iron
- By Application:
- Water
- Gas
- Liquid Waste
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Piping and Plumbing Fitting Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
Piping and plumbing fitting is the process of connecting pipes and fittings together to create a system. Piping can be used for water, gas, oil, or other fluids. Fitting pieces are designed to connect with specific types of piping systems.
Some of the major companies in the piping and plumbing fitting market are SharkBite, Charlotte Pipe, Everbilt, Apollo, HOME-FLEX, Ford Meter Box, Mueller Company, Victaulic, A.Y. McDonald, Romac Industries, Smith Blair Inc, Tyler Union, Multi-Fittings Corporation, GPK, Jones Stephens, Sioux Chief, Advanced Drainage Systems, James Jones Company, Apollo Conbraco, Fernco.
The piping and plumbing fitting market is expected to grow at a compound annual growth rate of 5.5%.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Piping and Plumbing Fitting Market Overview
4.1 Introduction
4.1.1 Market Taxonomy
4.1.2 Market Definition
4.1.3 Macro-Economic Factors Impacting the Market Growth
4.2 Piping and Plumbing Fitting Market Dynamics
4.2.1 Market Drivers
4.2.2 Market Restraints
4.2.3 Market Opportunity
4.3 Piping and Plumbing Fitting Market - Supply Chain Analysis
4.3.1 List of Key Suppliers
4.3.2 List of Key Distributors
4.3.3 List of Key Consumers
4.4 Key Forces Shaping the Piping and Plumbing Fitting Market
4.4.1 Bargaining Power of Suppliers
4.4.2 Bargaining Power of Buyers
4.4.3 Threat of Substitution
4.4.4 Threat of New Entrants
4.4.5 Competitive Rivalry
4.5 Global Piping and Plumbing Fitting Market Size & Forecast, 2018-2028
4.5.1 Piping and Plumbing Fitting Market Size and Y-o-Y Growth
4.5.2 Piping and Plumbing Fitting Market Absolute $ Opportunity
Chapter 5 Global Piping and Plumbing Fitting Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Piping and Plumbing Fitting Market Size Forecast by Type
5.2.1 Copper
5.2.2 Iron
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Piping and Plumbing Fitting Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Piping and Plumbing Fitting Market Size Forecast by Applications
6.2.1 Water
6.2.2 Gas
6.2.3 Liquid Waste
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Piping and Plumbing Fitting Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Piping and Plumbing Fitting Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Piping and Plumbing Fitting Analysis and Forecast
9.1 Introduction
9.2 North America Piping and Plumbing Fitting Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Piping and Plumbing Fitting Market Size Forecast by Type
9.6.1 Copper
9.6.2 Iron
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Piping and Plumbing Fitting Market Size Forecast by Applications
9.10.1 Water
9.10.2 Gas
9.10.3 Liquid Waste
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Piping and Plumbing Fitting Analysis and Forecast
10.1 Introduction
10.2 Europe Piping and Plumbing Fitting Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Piping and Plumbing Fitting Market Size Forecast by Type
10.6.1 Copper
10.6.2 Iron
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Piping and Plumbing Fitting Market Size Forecast by Applications
10.10.1 Water
10.10.2 Gas
10.10.3 Liquid Waste
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Piping and Plumbing Fitting Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Piping and Plumbing Fitting Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Piping and Plumbing Fitting Market Size Forecast by Type
11.6.1 Copper
11.6.2 Iron
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Piping and Plumbing Fitting Market Size Forecast by Applications
11.10.1 Water
11.10.2 Gas
11.10.3 Liquid Waste
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Piping and Plumbing Fitting Analysis and Forecast
12.1 Introduction
12.2 Latin America Piping and Plumbing Fitting Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Piping and Plumbing Fitting Market Size Forecast by Type
12.6.1 Copper
12.6.2 Iron
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Piping and Plumbing Fitting Market Size Forecast by Applications
12.10.1 Water
12.10.2 Gas
12.10.3 Liquid Waste
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Piping and Plumbing Fitting Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Piping and Plumbing Fitting Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Piping and Plumbing Fitting Market Size Forecast by Type
13.6.1 Copper
13.6.2 Iron
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Piping and Plumbing Fitting Market Size Forecast by Applications
13.10.1 Water
13.10.2 Gas
13.10.3 Liquid Waste
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Piping and Plumbing Fitting Market: Competitive Dashboard
14.2 Global Piping and Plumbing Fitting Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 SharkBite
14.3.2 Charlotte Pipe
14.3.3 Everbilt
14.3.4 Apollo
14.3.5 HOME-FLEX
14.3.6 Ford Meter Box
14.3.7 Mueller Company
14.3.8 Victaulic
14.3.9 A.Y. McDonald
14.3.10 Romac Industries
14.3.11 Smith Blair Inc
14.3.12 Tyler Union
14.3.13 Multi-Fittings Corporation
14.3.14 GPK
14.3.15 Jones Stephens
14.3.16 Sioux Chief
14.3.17 Advanced Drainage Systems
14.3.18 James Jones Company
14.3.19 Apollo Conbraco
14.3.20 Fernco
