Market Overview:
The global plastic rigid intermediate bulk containers (PIB) market is expected to grow at a CAGR of 5.5% from 2018 to 2030. The growth in the market can be attributed to the increasing demand for PIBs from various end-use industries, such as industrial chemicals, petroleum & lubricants, food & beverages, pharmaceuticals and others. In terms of type, the high density polyethylene (HDPE) segment is projected to lead the global PIB market during the forecast period. This can be attributed to its properties such as high strength-to-weight ratio and resistance against corrosion and abrasion. In terms of application, the industrial chemicals segment is projected to lead the global PIB market during the forecast period.
Product Definition:
A plastic rigid intermediate bulk container is a type of container that is used to store and transport fluids, powders, and granular materials. They are made from high-density polyethylene (HDPE) or polypropylene (PP), which makes them strong and durable. These containers are important because they can be reused multiple times, which reduces waste and helps to conserve resources.
High Density Polyethylene (HDPE):
High-density polyethylene is a thermoplastic polymer with the viscosity of 0.79 cP and molecular weight ranging from 4,900 to 6,200. HDPE has better chemical resistance than low-density polyethylene owing to its higher density and longer chains. It is resistant to most solvents except for chlorinated ones such as hexane, benzene and perchloroethylene which are difficultly soluble in it.
Low Density Polyethylene (LDPE):
LDPE is a low-density polyethylene resin that offers several beneficial properties such as high chemical resistance, excellent mechanical strength, and the ability to be extruded into any shape. LDPE is widely used in various industries including food & beverage, automotive components, consumer goods packaging and more on account of its cost-effectiveness.
The global LDPE market size was valued at USD 4.5 billion in 2016.
Application Insights:
The industrial chemicals segment accounted for the largest revenue share in 2016 and is projected to continue its dominance over the forecast period. The growth can be attributed to increasing demand from various industries including oil & gas, chemical, cement, power generation and others.
The food & beverage industry is one of the rapidly growing sectors across the globe due to factors such as rapid urbanization along with a rise in disposable income levels of consumers. This has resulted in an increased demand for packaged food products which further drives growth.
Regional Analysis:
Asia Pacific is expected to be the fastest-growing region with a CAGR of XX% from 2018 to 2030 owing to increasing demand for plastic rigid intermediate bulk containers in countries such as China, India, and Japan. The growing manufacturing sector in these economies coupled with the rising number of pharmaceutical companies investing in this region will drive the market growth over the forecast period.
The European market accounted for 24.9% share of global revenue in 2017 on account of high product adoption across major end-use industries including food & beverages, pharmaceuticals, and chemicals among others due to their superior properties such as lightweight and durability which makes them suitable for long haul transportation at minimal costs.
Growth Factors:
- Increasing demand for plastic rigid intermediate bulk containers in the food and beverage industry as they are ideal for storage, transportation, and distribution of products.
- Rising popularity of lightweight and durable plastic rigid intermediate bulk containers among end-users due to their numerous benefits over traditional materials such as metal or wood.
- Proliferation of online retailing is resulting in an increase in the demand for plastic rigid intermediate bulk containers as they are being used extensively for packing and shipping products to consumers.
- Growing trend of using returnable packaging solutions is fueling the growth of the global market for plastic rigid intermediate bulk containers as these systems offer several advantages over one-time use packaging solutions.
Scope Of The Report
Report Attributes
Report Details
Report Title
Plastic Rigid Intermediate Bulk Containers Market Research Report
By Type
High Density Polyethylene (HDPE), Low Density Polyethylene (LDPE), Linear Low Density Polyethylene (LLDPE), Polyvinyl Chloride (PVC), Others
By Application
Industrial Chemicals, Petroleum & Lubricants, Food & Beverages, Pharmaceuticals, Others
By Companies
Greif, Inc., SCHUTZ Container Systems, Inc., Mauser Group, Time Technoplast Limited, Hoover Ferguson Group, Inc., Snyder Industries., Bulk Handling Australia Group Pty Ltd, Maschiopack GmbH, Greif, Inc.
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
240
Number of Tables & Figures
168
Customization Available
Yes, the report can be customized as per your need.
Global Plastic Rigid Intermediate Bulk Containers Market Report Segments:
The global Plastic Rigid Intermediate Bulk Containers market is segmented on the basis of:
Types
High Density Polyethylene (HDPE), Low Density Polyethylene (LDPE), Linear Low Density Polyethylene (LLDPE), Polyvinyl Chloride (PVC), Others
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Industrial Chemicals, Petroleum & Lubricants, Food & Beverages, Pharmaceuticals, Others
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- Greif, Inc.
- SCHUTZ Container Systems, Inc.
- Mauser Group
- Time Technoplast Limited
- Hoover Ferguson Group, Inc.
- Snyder Industries.
- Bulk Handling Australia Group Pty Ltd
- Maschiopack GmbH
- Greif, Inc.
Highlights of The Plastic Rigid Intermediate Bulk Containers Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- High Density Polyethylene (HDPE)
- Low Density Polyethylene (LDPE)
- Linear Low Density Polyethylene (LLDPE)
- Polyvinyl Chloride (PVC)
- Others
- By Application:
- Industrial Chemicals
- Petroleum & Lubricants
- Food & Beverages
- Pharmaceuticals
- Others
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Plastic Rigid Intermediate Bulk Containers Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
A plastic rigid intermediate bulk container is a type of shipping container made from high-density polyethylene. They are used to store goods that require protection from weather and physical damage, such as agricultural products.
Some of the key players operating in the plastic rigid intermediate bulk containers market are Greif, Inc., SCHUTZ Container Systems, Inc., Mauser Group, Time Technoplast Limited, Hoover Ferguson Group, Inc., Snyder Industries., Bulk Handling Australia Group Pty Ltd, Maschiopack GmbH, Greif, Inc..
The plastic rigid intermediate bulk containers market is expected to grow at a compound annual growth rate of 5.5%.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Plastic Rigid Intermediate Bulk Containers Market Overview
4.1 Introduction
4.1.1 Market Taxonomy
4.1.2 Market Definition
4.1.3 Macro-Economic Factors Impacting the Market Growth
4.2 Plastic Rigid Intermediate Bulk Containers Market Dynamics
4.2.1 Market Drivers
4.2.2 Market Restraints
4.2.3 Market Opportunity
4.3 Plastic Rigid Intermediate Bulk Containers Market - Supply Chain Analysis
4.3.1 List of Key Suppliers
4.3.2 List of Key Distributors
4.3.3 List of Key Consumers
4.4 Key Forces Shaping the Plastic Rigid Intermediate Bulk Containers Market
4.4.1 Bargaining Power of Suppliers
4.4.2 Bargaining Power of Buyers
4.4.3 Threat of Substitution
4.4.4 Threat of New Entrants
4.4.5 Competitive Rivalry
4.5 Global Plastic Rigid Intermediate Bulk Containers Market Size & Forecast, 2020-2028
4.5.1 Plastic Rigid Intermediate Bulk Containers Market Size and Y-o-Y Growth
4.5.2 Plastic Rigid Intermediate Bulk Containers Market Absolute $ Opportunity
Chapter 5 Global Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Market Size Forecast by Type
5.2.1 High Density Polyethylene (HDPE)
5.2.2 Low Density Polyethylene (LDPE)
5.2.3 Linear Low Density Polyethylene (LLDPE)
5.2.4 Polyvinyl Chloride (PVC)
5.2.5 Others
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Market Size Forecast by Applications
6.2.1 Industrial Chemicals
6.2.2 Petroleum & Lubricants
6.2.3 Food & Beverages
6.2.4 Pharmaceuticals
6.2.5 Others
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Plastic Rigid Intermediate Bulk Containers Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Plastic Rigid Intermediate Bulk Containers Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Analysis and Forecast
9.1 Introduction
9.2 North America Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Market Size Forecast by Type
9.6.1 High Density Polyethylene (HDPE)
9.6.2 Low Density Polyethylene (LDPE)
9.6.3 Linear Low Density Polyethylene (LLDPE)
9.6.4 Polyvinyl Chloride (PVC)
9.6.5 Others
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Market Size Forecast by Applications
9.10.1 Industrial Chemicals
9.10.2 Petroleum & Lubricants
9.10.3 Food & Beverages
9.10.4 Pharmaceuticals
9.10.5 Others
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Analysis and Forecast
10.1 Introduction
10.2 Europe Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Market Size Forecast by Type
10.6.1 High Density Polyethylene (HDPE)
10.6.2 Low Density Polyethylene (LDPE)
10.6.3 Linear Low Density Polyethylene (LLDPE)
10.6.4 Polyvinyl Chloride (PVC)
10.6.5 Others
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Market Size Forecast by Applications
10.10.1 Industrial Chemicals
10.10.2 Petroleum & Lubricants
10.10.3 Food & Beverages
10.10.4 Pharmaceuticals
10.10.5 Others
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Market Size Forecast by Type
11.6.1 High Density Polyethylene (HDPE)
11.6.2 Low Density Polyethylene (LDPE)
11.6.3 Linear Low Density Polyethylene (LLDPE)
11.6.4 Polyvinyl Chloride (PVC)
11.6.5 Others
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Market Size Forecast by Applications
11.10.1 Industrial Chemicals
11.10.2 Petroleum & Lubricants
11.10.3 Food & Beverages
11.10.4 Pharmaceuticals
11.10.5 Others
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Analysis and Forecast
12.1 Introduction
12.2 Latin America Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Market Size Forecast by Type
12.6.1 High Density Polyethylene (HDPE)
12.6.2 Low Density Polyethylene (LDPE)
12.6.3 Linear Low Density Polyethylene (LLDPE)
12.6.4 Polyvinyl Chloride (PVC)
12.6.5 Others
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Market Size Forecast by Applications
12.10.1 Industrial Chemicals
12.10.2 Petroleum & Lubricants
12.10.3 Food & Beverages
12.10.4 Pharmaceuticals
12.10.5 Others
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Market Size Forecast by Type
13.6.1 High Density Polyethylene (HDPE)
13.6.2 Low Density Polyethylene (LDPE)
13.6.3 Linear Low Density Polyethylene (LLDPE)
13.6.4 Polyvinyl Chloride (PVC)
13.6.5 Others
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Market Size Forecast by Applications
13.10.1 Industrial Chemicals
13.10.2 Petroleum & Lubricants
13.10.3 Food & Beverages
13.10.4 Pharmaceuticals
13.10.5 Others
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Plastic Rigid Intermediate Bulk Containers Market: Competitive Dashboard
14.2 Global Plastic Rigid Intermediate Bulk Containers Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 Greif, Inc.
14.3.2 SCHUTZ Container Systems, Inc.
14.3.3 Mauser Group
14.3.4 Time Technoplast Limited
14.3.5 Hoover Ferguson Group, Inc.
14.3.6 Snyder Industries.
14.3.7 Bulk Handling Australia Group Pty Ltd
14.3.8 Maschiopack GmbH
14.3.9 Greif, Inc.
