Market Overview:
The global plate beveling machines market is expected to grow at a CAGR of 5.5% during the forecast period from 2018 to 2030. The growth in the market can be attributed to the increasing demand for plate beveling machines from various end-use industries, such as machine manufacturing, shipbuilding, aerospace, automotive, oil & gas and power utility. In addition, the growing demand for electric and pneumatic plate beveling machines is also contributing to the growth of this market. However, factors such as high installation and maintenance costs may restrain the growth of this market during the forecast period. On basis of type, electric plate beveling machines are expected to account for a larger share in terms of revenue in 2018 than pneumatic ones; however, pneumatic ones are projected to grow at a higher CAGR during 2018-2030 owing their advantages over electric ones including low noise levels.
Product Definition:
A plate beveling machine is a power-driven tool that uses a rotating wheel to cut and smooth the edge of metal plates. It is an important tool in fabrication shops, where it is used to create beveled edges on plates that will later be welded together.
Electric:
Electric, it's usage.
The global electric, it's usage and growth factor in plate beveling machines market size was valued at USD 2.5 billion in 2015. The increasing demand for automation across the manufacturing sector is expected to drive the industry over the forecast period. The growing use of robotics has increased productivity by reducing human errors which is further likely to propel product demand over the next seven years.
Pneumatic:
Pneumatic is the combination of air and vacuum. It is used in plate beveling machines for removing material by creating a vacuum between the plates which are pressed together. The pneumatic system consists of an air compressor, a source of compressed air, and one or more vane pumps that remove material from the plates.
Application Insights:
The global plate beveling machines market is segmented by application into machine manufacturing, shipbuilding, aerospace, automotive and oil & gas, power utility and other applications. The machine manufacturing segment held the largest share in 2017 owing to the growing demand for precision-made components. Components made using beveled edges are stronger than those with square or rounded corners as they can withstand greater stress without wearing out or breaking down. Plate bevelling is widely used in various industries including automotive (bezels), consumer goods (remote control cars/toys), medical equipment & devices (surgical instruments) and electronics products among others.
In automobile industry, it is used for manufacturing body panels such as fenders; hoods; doors; roofs; trunk lids along with interior trim pieces such as seat pan frames along with fuel caps & lids.
Regional Analysis:
Asia Pacific dominated the global market in 2017 and is expected to continue its dominance over the forecast period. The growth of this region can be attributed to increasing demand from end-users such as machine manufacturing, shipbuilding, aerospace and automotive industries. In addition, rising investments by governments for modernization of plate mills are anticipated to drive the market further.
The Asia Pacific was followed by Europe in terms of revenue share in 2017 owing to high demand from end-user industries such as oil & gas and power utility industry.
Growth Factors:
- Increasing demand for automobiles and transportation equipment
- Growing construction and infrastructure activities
- Rising demand from the metal fabrication industry
- Increasing penetration of plate beveling machines in developing countries
- Technological advancements in plate beveling machines
Scope Of The Report
Report Attributes
Report Details
Report Title
Plate Beveling Machines Market Research Report
By Type
Electric, Pneumatic
By Application
Machine Manufacturing, Shipbuilding, Aerospace, Automotive, Oil & Gas, Power Utility, Others
By Companies
JET Tools, BDS Maschinen GmbH, Steelmax Tools LLC, Euroboor, CS Unitec, SAAR USA, Bevel Limited, TAG Pipe Equipment Specialists Ltd, Gullco Internationals, Baileigh Industrial, Shanghai Huawei Welding & Cutting Machine Co., Ltd, SHANGHAI TAOLE MACHINERY CO. LTD, Pokou Machinery (Shanghai) Co., Lt
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
216
Number of Tables & Figures
152
Customization Available
Yes, the report can be customized as per your need.
Global Plate Beveling Machines Market Report Segments:
The global Plate Beveling Machines market is segmented on the basis of:
Types
Electric, Pneumatic
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Machine Manufacturing, Shipbuilding, Aerospace, Automotive, Oil & Gas, Power Utility, Others
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- JET Tools
- BDS Maschinen GmbH
- Steelmax Tools LLC
- Euroboor
- CS Unitec
- SAAR USA
- Bevel Limited
- TAG Pipe Equipment Specialists Ltd
- Gullco Internationals
- Baileigh Industrial
- Shanghai Huawei Welding & Cutting Machine Co., Ltd
- SHANGHAI TAOLE MACHINERY CO. LTD
- Pokou Machinery (Shanghai) Co., Lt
Highlights of The Plate Beveling Machines Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- Electric
- Pneumatic
- By Application:
- Machine Manufacturing
- Shipbuilding
- Aerospace
- Automotive
- Oil & Gas
- Power Utility
- Others
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Plate Beveling Machines Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
A plate beveling machines is a machine that bevels or angles the edges of plates. It is used in manufacturing to create precision parts, such as gears and other mechanical components.
Some of the major players in the plate beveling machines market are JET Tools, BDS Maschinen GmbH, Steelmax Tools LLC, Euroboor, CS Unitec, SAAR USA, Bevel Limited, TAG Pipe Equipment Specialists Ltd, Gullco Internationals, Baileigh Industrial, Shanghai Huawei Welding & Cutting Machine Co., Ltd, SHANGHAI TAOLE MACHINERY CO. LTD, Pokou Machinery (Shanghai) Co., Lt.
The plate beveling machines market is expected to grow at a compound annual growth rate of 5.5%.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Plate Beveling Machines Market Overview
4.1 Introduction
4.1.1 Market Taxonomy
4.1.2 Market Definition
4.1.3 Macro-Economic Factors Impacting the Market Growth
4.2 Plate Beveling Machines Market Dynamics
4.2.1 Market Drivers
4.2.2 Market Restraints
4.2.3 Market Opportunity
4.3 Plate Beveling Machines Market - Supply Chain Analysis
4.3.1 List of Key Suppliers
4.3.2 List of Key Distributors
4.3.3 List of Key Consumers
4.4 Key Forces Shaping the Plate Beveling Machines Market
4.4.1 Bargaining Power of Suppliers
4.4.2 Bargaining Power of Buyers
4.4.3 Threat of Substitution
4.4.4 Threat of New Entrants
4.4.5 Competitive Rivalry
4.5 Global Plate Beveling Machines Market Size & Forecast, 2018-2028
4.5.1 Plate Beveling Machines Market Size and Y-o-Y Growth
4.5.2 Plate Beveling Machines Market Absolute $ Opportunity
Chapter 5 Global Plate Beveling Machines Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Plate Beveling Machines Market Size Forecast by Type
5.2.1 Electric
5.2.2 Pneumatic
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Plate Beveling Machines Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Plate Beveling Machines Market Size Forecast by Applications
6.2.1 Machine Manufacturing
6.2.2 Shipbuilding
6.2.3 Aerospace
6.2.4 Automotive
6.2.5 Oil & Gas
6.2.6 Power Utility
6.2.7 Others
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Plate Beveling Machines Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Plate Beveling Machines Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Plate Beveling Machines Analysis and Forecast
9.1 Introduction
9.2 North America Plate Beveling Machines Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Plate Beveling Machines Market Size Forecast by Type
9.6.1 Electric
9.6.2 Pneumatic
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Plate Beveling Machines Market Size Forecast by Applications
9.10.1 Machine Manufacturing
9.10.2 Shipbuilding
9.10.3 Aerospace
9.10.4 Automotive
9.10.5 Oil & Gas
9.10.6 Power Utility
9.10.7 Others
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Plate Beveling Machines Analysis and Forecast
10.1 Introduction
10.2 Europe Plate Beveling Machines Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Plate Beveling Machines Market Size Forecast by Type
10.6.1 Electric
10.6.2 Pneumatic
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Plate Beveling Machines Market Size Forecast by Applications
10.10.1 Machine Manufacturing
10.10.2 Shipbuilding
10.10.3 Aerospace
10.10.4 Automotive
10.10.5 Oil & Gas
10.10.6 Power Utility
10.10.7 Others
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Plate Beveling Machines Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Plate Beveling Machines Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Plate Beveling Machines Market Size Forecast by Type
11.6.1 Electric
11.6.2 Pneumatic
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Plate Beveling Machines Market Size Forecast by Applications
11.10.1 Machine Manufacturing
11.10.2 Shipbuilding
11.10.3 Aerospace
11.10.4 Automotive
11.10.5 Oil & Gas
11.10.6 Power Utility
11.10.7 Others
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Plate Beveling Machines Analysis and Forecast
12.1 Introduction
12.2 Latin America Plate Beveling Machines Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Plate Beveling Machines Market Size Forecast by Type
12.6.1 Electric
12.6.2 Pneumatic
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Plate Beveling Machines Market Size Forecast by Applications
12.10.1 Machine Manufacturing
12.10.2 Shipbuilding
12.10.3 Aerospace
12.10.4 Automotive
12.10.5 Oil & Gas
12.10.6 Power Utility
12.10.7 Others
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Plate Beveling Machines Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Plate Beveling Machines Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Plate Beveling Machines Market Size Forecast by Type
13.6.1 Electric
13.6.2 Pneumatic
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Plate Beveling Machines Market Size Forecast by Applications
13.10.1 Machine Manufacturing
13.10.2 Shipbuilding
13.10.3 Aerospace
13.10.4 Automotive
13.10.5 Oil & Gas
13.10.6 Power Utility
13.10.7 Others
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Plate Beveling Machines Market: Competitive Dashboard
14.2 Global Plate Beveling Machines Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 JET Tools
14.3.2 BDS Maschinen GmbH
14.3.3 Steelmax Tools LLC
14.3.4 Euroboor
14.3.5 CS Unitec
14.3.6 SAAR USA
14.3.7 Bevel Limited
14.3.8 TAG Pipe Equipment Specialists Ltd
14.3.9 Gullco Internationals
14.3.10 Baileigh Industrial
14.3.11 Shanghai Huawei Welding & Cutting Machine Co., Ltd
14.3.12 SHANGHAI TAOLE MACHINERY CO. LTD
14.3.13 Pokou Machinery (Shanghai) Co., Lt
