Market Overview:
The global plating copper on plastics market is expected to grow at a CAGR of 5.8% during the forecast period from 2018 to 2030. The growth in this market can be attributed to the increasing demand for copper-plated plastic products from various end-use industries, such as automotive, electrical & electronics, and domestic fittings. In addition, the growing demand for lightweight and durable products is also fueling the growth of this market. On the basis of type, PC (polycarbonate) plastic is expected to lead the global plating copper on plastics market during the forecast period. This can be attributed to its high strength-to-weight ratio and resistance against heat and chemicals.
Product Definition:
Plating copper on plastics is the process of depositing a thin layer of copper onto the surface of a plastic object. This can be done for a number of reasons, including improving the appearance and durability of the object. Copper plating can also help to prevent corrosion and increase electrical conductivity.
Polycarbonate (PC) Plastic:
Polycarbonate (PC) plastic is a thermoplastic polymer that contains carbon and hydrogen. It has high heat & impact resistance, excellent chemical stability, and good electrical properties. Polycarbonate resins are available in the form of pellets or granules which can be added to other polymers to produce films or sheets with varied thicknesses. They have applications in various end-use industries such as automotive, building & construction, consumer goods packaging etc.
Nylon Plastic:
It has high strength and excellent abrasion resistance. Nylon (polyamide) plastic can be used as an alternative to copper on plastics in electrical applications where good mechanical properties, low cost and easy fabrication are required. In addition, it offers superior performance over conventional materials such as PVC & PE owing to its higher tensile strength & heat resistant property.
Application Insights:
Automotive was the largest application segment in 2017 and is expected to continue its dominance over the forecast period. Automotive parts such as body panels, hoods, trims and decorative trim are made of copper plating on plastics. The growth of automotive industry is directly proportional to the economic development of a country. In emerging economies like India and China, demand for vehicles has increased significantly in last few years owing to increasing disposable income coupled with rising living standards. This trend is expected to continue over the forecast period which will have a positive impact on market growth during future phases also.
Plastic components used in electrical & electronics industries include polycarbonate (PC), nylon, ABS plastic.
Regional Analysis:
Asia Pacific dominated the global market in 2017 and is expected to continue its dominance over the forecast period. The growth of this region can be attributed to rising product demand from end-use industries such as automotive, electrical & electronics, construction, and others. China is one of the largest producers and consumers of plating copper on plastics in this region owing to presence of numerous manufacturers based there.
The Asia Pacific market was closely followed by Europe which accounted for a revenue share of more than 20% in 2017 owing to high production volume from countries such as Germany, U.K., Italy, France among others due to growing demand from various end-use sectors across these regions.
Growth Factors:
- Increasing demand from end-use industries such as automotive, electrical and electronics, and construction is expected to drive the growth of the plating copper on plastics market over the forecast period.
- Rising demand for lightweight and corrosion-resistant components in automobiles is projected to boost the demand for plating copper on plastics products over the next few years.
- Growing awareness about benefits of using copper-plated plastic components in electrical & electronic applications is anticipated to fuel market growth during the forecast period.
- Increasing investments by key players in research and development activities to develop new technologies for plating copper on plastics is likely to propel market growth in future.
Scope Of The Report
Report Attributes
Report Details
Report Title
Plating Copper On Plastics Market Research Report
By Type
Polycarbonate (PC) Plastic, Nylon Plastic, PBT Plastic, ABS Plastic, Other
By Application
Automotive, Electrical & Electronics, Domestic Fittings, Others
By Companies
Chromoplastica CMC, Galva Decoparts, Okuno International, SRG Global, Techmetals, BIA plastics and electroplating GmbH, Dixline, Leader Plating on Plastics, Precision Plating (AUS), Artcraft Plating & Finishing, Enthone, MPC Plating, Sharretts Plating Company (SPC), C. Uyemura, MacDermid, Minth Group, Cybershield, Phillips Plating, Sarrel, Bolta Werke GmbH, Grohe, Xin Point Holding Limited, Coventya, JCU Corporation, Dow Chemical, DuPont, Atotech
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
153
Number of Tables & Figures
108
Customization Available
Yes, the report can be customized as per your need.
Global Plating Copper On Plastics Market Report Segments:
The global Plating Copper On Plastics market is segmented on the basis of:
Types
Polycarbonate (PC) Plastic, Nylon Plastic, PBT Plastic, ABS Plastic, Other
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Automotive, Electrical & Electronics, Domestic Fittings, Others
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- Chromoplastica CMC
- Galva Decoparts
- Okuno International
- SRG Global
- Techmetals
- BIA plastics and electroplating GmbH
- Dixline
- Leader Plating on Plastics
- Precision Plating (AUS)
- Artcraft Plating & Finishing
- Enthone
- MPC Plating
- Sharretts Plating Company (SPC)
- C. Uyemura
- MacDermid
- Minth Group
- Cybershield
- Phillips Plating
- Sarrel
- Bolta Werke GmbH
- Grohe
- Xin Point Holding Limited
- Coventya
- JCU Corporation
- Dow Chemical
- DuPont
- Atotech
Highlights of The Plating Copper On Plastics Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- Polycarbonate (PC) Plastic
- Nylon Plastic
- PBT Plastic
- ABS Plastic
- Other
- By Application:
- Automotive
- Electrical & Electronics
- Domestic Fittings
- Others
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Plating Copper On Plastics Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
Plating copper on plastics is a process of coating the plastic with a layer of copper. The purpose of plating is to protect the plastic from corrosion and other environmental factors.
Some of the major players in the plating copper on plastics market are Chromoplastica CMC, Galva Decoparts, Okuno International, SRG Global, Techmetals, BIA plastics and electroplating GmbH, Dixline, Leader Plating on Plastics, Precision Plating (AUS), Artcraft Plating & Finishing, Enthone, MPC Plating, Sharretts Plating Company (SPC), C. Uyemura, MacDermid, Minth Group, Cybershield, Phillips Plating, Sarrel, Bolta Werke GmbH, Grohe, Xin Point Holding Limited, Coventya, JCU Corporation, Dow Chemical, DuPont, Atotech.
The plating copper on plastics market is expected to register a CAGR of 5.8%.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Plating Copper On Plastics Market Overview
4.1 Introduction
4.1.1 Market Taxonomy
4.1.2 Market Definition
4.1.3 Macro-Economic Factors Impacting the Market Growth
4.2 Plating Copper On Plastics Market Dynamics
4.2.1 Market Drivers
4.2.2 Market Restraints
4.2.3 Market Opportunity
4.3 Plating Copper On Plastics Market - Supply Chain Analysis
4.3.1 List of Key Suppliers
4.3.2 List of Key Distributors
4.3.3 List of Key Consumers
4.4 Key Forces Shaping the Plating Copper On Plastics Market
4.4.1 Bargaining Power of Suppliers
4.4.2 Bargaining Power of Buyers
4.4.3 Threat of Substitution
4.4.4 Threat of New Entrants
4.4.5 Competitive Rivalry
4.5 Global Plating Copper On Plastics Market Size & Forecast, 2018-2028
4.5.1 Plating Copper On Plastics Market Size and Y-o-Y Growth
4.5.2 Plating Copper On Plastics Market Absolute $ Opportunity
Chapter 5 Global Plating Copper On Plastics Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Plating Copper On Plastics Market Size Forecast by Type
5.2.1 Polycarbonate (PC) Plastic
5.2.2 Nylon Plastic
5.2.3 PBT Plastic
5.2.4 ABS Plastic
5.2.5 Other
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Plating Copper On Plastics Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Plating Copper On Plastics Market Size Forecast by Applications
6.2.1 Automotive
6.2.2 Electrical & Electronics
6.2.3 Domestic Fittings
6.2.4 Others
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Plating Copper On Plastics Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Plating Copper On Plastics Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Plating Copper On Plastics Analysis and Forecast
9.1 Introduction
9.2 North America Plating Copper On Plastics Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Plating Copper On Plastics Market Size Forecast by Type
9.6.1 Polycarbonate (PC) Plastic
9.6.2 Nylon Plastic
9.6.3 PBT Plastic
9.6.4 ABS Plastic
9.6.5 Other
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Plating Copper On Plastics Market Size Forecast by Applications
9.10.1 Automotive
9.10.2 Electrical & Electronics
9.10.3 Domestic Fittings
9.10.4 Others
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Plating Copper On Plastics Analysis and Forecast
10.1 Introduction
10.2 Europe Plating Copper On Plastics Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Plating Copper On Plastics Market Size Forecast by Type
10.6.1 Polycarbonate (PC) Plastic
10.6.2 Nylon Plastic
10.6.3 PBT Plastic
10.6.4 ABS Plastic
10.6.5 Other
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Plating Copper On Plastics Market Size Forecast by Applications
10.10.1 Automotive
10.10.2 Electrical & Electronics
10.10.3 Domestic Fittings
10.10.4 Others
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Plating Copper On Plastics Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Plating Copper On Plastics Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Plating Copper On Plastics Market Size Forecast by Type
11.6.1 Polycarbonate (PC) Plastic
11.6.2 Nylon Plastic
11.6.3 PBT Plastic
11.6.4 ABS Plastic
11.6.5 Other
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Plating Copper On Plastics Market Size Forecast by Applications
11.10.1 Automotive
11.10.2 Electrical & Electronics
11.10.3 Domestic Fittings
11.10.4 Others
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Plating Copper On Plastics Analysis and Forecast
12.1 Introduction
12.2 Latin America Plating Copper On Plastics Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Plating Copper On Plastics Market Size Forecast by Type
12.6.1 Polycarbonate (PC) Plastic
12.6.2 Nylon Plastic
12.6.3 PBT Plastic
12.6.4 ABS Plastic
12.6.5 Other
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Plating Copper On Plastics Market Size Forecast by Applications
12.10.1 Automotive
12.10.2 Electrical & Electronics
12.10.3 Domestic Fittings
12.10.4 Others
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Plating Copper On Plastics Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Plating Copper On Plastics Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Plating Copper On Plastics Market Size Forecast by Type
13.6.1 Polycarbonate (PC) Plastic
13.6.2 Nylon Plastic
13.6.3 PBT Plastic
13.6.4 ABS Plastic
13.6.5 Other
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Plating Copper On Plastics Market Size Forecast by Applications
13.10.1 Automotive
13.10.2 Electrical & Electronics
13.10.3 Domestic Fittings
13.10.4 Others
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Plating Copper On Plastics Market: Competitive Dashboard
14.2 Global Plating Copper On Plastics Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 Chromoplastica CMC
14.3.2 Galva Decoparts
14.3.3 Okuno International
14.3.4 SRG Global
14.3.5 Techmetals
14.3.6 BIA plastics and electroplating GmbH
14.3.7 Dixline
14.3.8 Leader Plating on Plastics
14.3.9 Precision Plating (AUS)
14.3.10 Artcraft Plating & Finishing
14.3.11 Enthone
14.3.12 MPC Plating
14.3.13 Sharretts Plating Company (SPC)
14.3.14 C. Uyemura
14.3.15 MacDermid
14.3.16 Minth Group
14.3.17 Cybershield
14.3.18 Phillips Plating
14.3.19 Sarrel
14.3.20 Bolta Werke GmbH
14.3.21 Grohe
14.3.22 Xin Point Holding Limited
14.3.23 Coventya
14.3.24 JCU Corporation
14.3.25 Dow Chemical
14.3.26 DuPont
14.3.27 Atotech
