Market Overview:
The global pocket ventilation systems market is expected to grow at a CAGR of 5.5% during the forecast period from 2018 to 2030. The growth in this market can be attributed to the increasing demand for pocket ventilation systems from various end-use industries, such as oil & gas, transportation, environment & geo-techniques, and others. In addition, the growing awareness about the benefits of using pocket ventilation systems is also contributing to the growth of this market. Based on type, the global pocket ventilation systems market can be segmented into steam heated cylinders, multi-cylinder dryers, single-tier dryers and flakt dryers. Among these segments, steam heated cylinders are expected to account for a major share of the global pocket ventilation systems market in 2018. This segment is projected to grow at a CAGR of 5% during the forecast period from 2018 to 2030.
Product Definition:
Pocket ventilation systems (PVSs) are a type of mechanical ventilation system that helps to remove excess heat and humidity from an enclosed space. They are typically used in small, tight spaces where other ventilation systems would not be feasible or effective. PVSs can be important for maintaining a comfortable and safe environment in buildings, vehicles, and other enclosed spaces.
Steam Heated Cylinders:
Steam heated cylinders are used in pocket ventilation systems to provide heat as well as Ventilation. The system works on the principle of Condensation, which takes place between the moist air and the cylinder surface, thereby producing a vapor inside the cylinder. This vapor is then released into the surrounding area through exhaust outlets or mouthpieces present at both ends of each steam-heated cylinder.
Multi-Cylinder Dryers:
Multi-cylinder dryers are used to improve the efficiency of pocket ventilation systems. These devices consist of a series of cylinders, each with its own blower wheel and duct. The multi-cylinder dryer is usually placed in between the patient's bed and the wall, or ceiling. As air passes through the patient's bed it is heated by his or her body temperature and then delivered into rooms via ducts attached to exhaust ports located on either side of beds or walls.
Application Insights:
The oil & gas application segment held the largest market share of over 30% in 2017. The need for maintaining low temperatures and high air flow rates in the reservoir is expected to drive the demand for steam heated cylinders. These systems are also used in various other industries such as power generation, petrochemicals, and marine among others.
Regional Analysis:
North America dominated the global market in 2017 owing to the presence of a large number of oil and gas reserves. The region is expected to maintain its dominance over the forecast period, with U.S. being one of the major contributors to regional growth.
Growth Factors:
- Increasing awareness about the benefits of using pocket ventilation systems among healthcare professionals and patients.
- Growing demand for minimally invasive surgical procedures that require use of pocket ventilation systems.
- Technological advancements in pocket ventilation systems that offer enhanced performance and safety features.
- Rising number of hospitals and clinics adopting pocket ventilation systems as a standard procedure for surgeries.
- increasing adoption of portable pocket ventilation systems by home healthcare providers to provide better care to patients with respiratory problems
Scope Of The Report
Report Attributes
Report Details
Report Title
Pocket Ventilation Systems Market Research Report
By Type
Steam Heated Cylinders, Multi-Cylinder Dryers, Single-Tier Dryers, Flakt Dryers
By Application
Oil & Gas, Transportation, Environment & Geo-Techniques, Others
By Companies
PCB, RLE Technologies, Pentair, Silixa, TTK, Sensornet, Yokogawa Electric, Thermocoax, Cable, PCB
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
145
Number of Tables & Figures
102
Customization Available
Yes, the report can be customized as per your need.
Global Pocket Ventilation Systems Market Report Segments:
The global Pocket Ventilation Systems market is segmented on the basis of:
Types
Steam Heated Cylinders, Multi-Cylinder Dryers, Single-Tier Dryers, Flakt Dryers
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Oil & Gas, Transportation, Environment & Geo-Techniques, Others
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- PCB
- RLE Technologies
- Pentair
- Silixa
- TTK
- Sensornet
- Yokogawa Electric
- Thermocoax
- Cable
- PCB
Highlights of The Pocket Ventilation Systems Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- Steam Heated Cylinders
- Multi-Cylinder Dryers
- Single-Tier Dryers
- Flakt Dryers
- By Application:
- Oil & Gas
- Transportation
- Environment & Geo-Techniques
- Others
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Pocket Ventilation Systems Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
Pocket ventilation systems are small, portable fans that can be used to help people breathe easier. They are often used in places where there is a lot of smoke or heat, such as during a fire or when there is an emergency.
Some of the major companies in the pocket ventilation systems market are PCB, RLE Technologies, Pentair, Silixa, TTK, Sensornet, Yokogawa Electric, Thermocoax, Cable, PCB.
The pocket ventilation systems market is expected to register a CAGR of 5.5%.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Pocket Ventilation Systems Market Overview
4.1 Introduction
4.1.1 Market Taxonomy
4.1.2 Market Definition
4.1.3 Macro-Economic Factors Impacting the Market Growth
4.2 Pocket Ventilation Systems Market Dynamics
4.2.1 Market Drivers
4.2.2 Market Restraints
4.2.3 Market Opportunity
4.3 Pocket Ventilation Systems Market - Supply Chain Analysis
4.3.1 List of Key Suppliers
4.3.2 List of Key Distributors
4.3.3 List of Key Consumers
4.4 Key Forces Shaping the Pocket Ventilation Systems Market
4.4.1 Bargaining Power of Suppliers
4.4.2 Bargaining Power of Buyers
4.4.3 Threat of Substitution
4.4.4 Threat of New Entrants
4.4.5 Competitive Rivalry
4.5 Global Pocket Ventilation Systems Market Size & Forecast, 2020-2028
4.5.1 Pocket Ventilation Systems Market Size and Y-o-Y Growth
4.5.2 Pocket Ventilation Systems Market Absolute $ Opportunity
Chapter 5 Global Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Market Size Forecast by Type
5.2.1 Steam Heated Cylinders
5.2.2 Multi-Cylinder Dryers
5.2.3 Single-Tier Dryers
5.2.4 Flakt Dryers
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Market Size Forecast by Applications
6.2.1 Oil & Gas
6.2.2 Transportation
6.2.3 Environment & Geo-Techniques
6.2.4 Others
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Pocket Ventilation Systems Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Pocket Ventilation Systems Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Analysis and Forecast
9.1 Introduction
9.2 North America Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Market Size Forecast by Type
9.6.1 Steam Heated Cylinders
9.6.2 Multi-Cylinder Dryers
9.6.3 Single-Tier Dryers
9.6.4 Flakt Dryers
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Market Size Forecast by Applications
9.10.1 Oil & Gas
9.10.2 Transportation
9.10.3 Environment & Geo-Techniques
9.10.4 Others
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Analysis and Forecast
10.1 Introduction
10.2 Europe Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Market Size Forecast by Type
10.6.1 Steam Heated Cylinders
10.6.2 Multi-Cylinder Dryers
10.6.3 Single-Tier Dryers
10.6.4 Flakt Dryers
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Market Size Forecast by Applications
10.10.1 Oil & Gas
10.10.2 Transportation
10.10.3 Environment & Geo-Techniques
10.10.4 Others
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Market Size Forecast by Type
11.6.1 Steam Heated Cylinders
11.6.2 Multi-Cylinder Dryers
11.6.3 Single-Tier Dryers
11.6.4 Flakt Dryers
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Market Size Forecast by Applications
11.10.1 Oil & Gas
11.10.2 Transportation
11.10.3 Environment & Geo-Techniques
11.10.4 Others
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Analysis and Forecast
12.1 Introduction
12.2 Latin America Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Market Size Forecast by Type
12.6.1 Steam Heated Cylinders
12.6.2 Multi-Cylinder Dryers
12.6.3 Single-Tier Dryers
12.6.4 Flakt Dryers
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Market Size Forecast by Applications
12.10.1 Oil & Gas
12.10.2 Transportation
12.10.3 Environment & Geo-Techniques
12.10.4 Others
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Market Size Forecast by Type
13.6.1 Steam Heated Cylinders
13.6.2 Multi-Cylinder Dryers
13.6.3 Single-Tier Dryers
13.6.4 Flakt Dryers
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Market Size Forecast by Applications
13.10.1 Oil & Gas
13.10.2 Transportation
13.10.3 Environment & Geo-Techniques
13.10.4 Others
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Pocket Ventilation Systems Market: Competitive Dashboard
14.2 Global Pocket Ventilation Systems Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 PCB
14.3.2 RLE Technologies
14.3.3 Pentair
14.3.4 Silixa
14.3.5 TTK
14.3.6 Sensornet
14.3.7 Yokogawa Electric
14.3.8 Thermocoax
14.3.9 Cable
14.3.10 PCB
