Market Overview:
The global polyimide heaters market is expected to grow at a CAGR of 5.5% during the forecast period from 2018 to 2030. The growth in this market can be attributed to the increasing demand for polyimide heaters in various applications, such as medical, aerospace and defense, electronics, food and beverage, automotive and others. Polyimide heaters are used in these applications due to their properties such as high thermal stability, low coefficient of thermal expansion (CTE), good electrical insulation and resistance to chemical corrosion.
Product Definition:
Polyimide heaters are made from a polymer material that has been specifically designed to provide efficient and reliable heating. Polyimide heaters are used in a variety of applications, including medical devices, semiconductor processing, and aerospace engineering. They offer many advantages over traditional heating methods, such as resistance wire or ceramic heaters. Polyimide heaters are very thin and lightweight, so they can be easily incorporated into complex assemblies. They also generate little noise or vibration and have a long service life.
Rectangle Type:
The rectangle type is a heat exchanger that has two metal sheets, top and bottom, with an insulation material in the middle. It is used for heating or cooling liquids and gases. The liquid can be placed on either side of the metal sheets; however, it must be able to flow through the center of the sheet.
Round Type:
Round type is a heat exchanger that consists of two concentric tubes joined by an orifice. The outer tube is usually made from high-grade steel and the inner one from copper or aluminum. The fluid to be heated passes through the outer tube where it is exposed to greater temperature and pressure changes, while the outlet from the inner tube provides cooling for condensate which may be drawn off as a separate stream.
Application Insights:
The aerospace and defense application segment led the market in 2017. The segment is projected to expand at a CAGR of XX% over the forecast period owing to rising use of polyimide heaters in military aircraft, helicopters, and UAVs. In addition, increasing use of polyimide heaters for space applications is expected to drive demand over the next eight years.
The electronics industry uses PEEK coatings as they provide excellent thermal shock resistance which helps prevent electronic components from damage due to impact or fall accidents. Moreover, superior properties such as low maintenance cost and high durability are likely to propel its demand in various end-use industries including automotive electronics during 2018-2030 period. Other key end-use industries include medical equipment & devices manufacturing; food & beverage processing; textile machinery; pulp and paper industry; petroleum refining sector among others such as chemical plants etc.
Regional Analysis:
Asia Pacific is expected to be the fastest-growing region over the forecast period. The growth can be attributed to rising demand from end-use industries such as electronics, medical, automotive and aerospace. Increasing production of automobiles in China and India on account of low manufacturing cost coupled with growing domestic consumption is anticipated to drive regional market growth over the forecast period.
The presence of key aircraft manufacturers including Airbus S.A., Boeing Co., Lockheed Martin Corporation has fueled product demand from defense sector across Europe region since 2014; whereas North America polyimide heater industry was boosted by strong performance of UAVs in Afghanistan and Syria campaigns (ending 2017). In addition, technological advancements such as smart heating control system are further expected to propel product demand in military application over next eight years (ending 2023).
In terms of revenue share, Europe polyimide heaters market accounted for a major portion owing to early adoption by several end-use industries such as aerospace.
Growth Factors:
- Increasing demand from the electronics and electrical industries for polyimide heaters as a result of their superior thermal properties.
- Growing popularity of polyimide heaters in medical applications, owing to their ability to provide uniform heating and prevent tissue damage.
- Rising demand for lightweight and compact polyimide heaters in aerospace and defense applications.
- Increasing use of polyimide heaters in automotive manufacturing processes to improve fuel efficiency and reduce emissions levels.
Scope Of The Report
Report Attributes
Report Details
Report Title
Polyimide Heaters Market Research Report
By Type
Rectangle Type, Round Type
By Application
Medical, Aerospace and Defense, Electronics, Food and Beverage, Automotive, Others
By Companies
Durex Industries, Watlow, Epec, Hi-Heat Industries Inc, Heatron, Inc, Bucan, O&M HEATER CO.,LTD, Wattco, BriskHeat, Birk Manufacturing, Inc, Chromalox, Tempec, Backer Marathon, All Flex, OMEGA, Sinomas, Dpstar Group, Horn GmbH Gottmadingen
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
229
Number of Tables & Figures
161
Customization Available
Yes, the report can be customized as per your need.
Global Polyimide Heaters Market Report Segments:
The global Polyimide Heaters market is segmented on the basis of:
Types
Rectangle Type, Round Type
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Medical, Aerospace and Defense, Electronics, Food and Beverage, Automotive, Others
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- Durex Industries
- Watlow
- Epec
- Hi-Heat Industries Inc
- Heatron, Inc
- Bucan
- O&M HEATER CO.,LTD
- Wattco
- BriskHeat
- Birk Manufacturing, Inc
- Chromalox
- Tempec
- Backer Marathon
- All Flex
- OMEGA
- Sinomas
- Dpstar Group
- Horn GmbH Gottmadingen
Highlights of The Polyimide Heaters Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- Rectangle Type
- Round Type
- By Application:
- Medical
- Aerospace and Defense
- Electronics
- Food and Beverage
- Automotive
- Others
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Polyimide Heaters Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
Polyimide heaters are a type of electric heater that uses polyimide as the heating medium. Polyimide is a thermoplastic material that can be shaped into any desired shape and is often used in industrial applications because it has high thermal conductivity. This makes polyimide heaters ideal for use in places where there is limited space or where temperatures need to be kept very low, such as under car seats or inside computer cases.
Some of the major companies in the polyimide heaters market are Durex Industries, Watlow, Epec, Hi-Heat Industries Inc, Heatron, Inc, Bucan, O&M HEATER CO.,LTD, Wattco, BriskHeat, Birk Manufacturing, Inc, Chromalox, Tempec, Backer Marathon, All Flex, OMEGA, Sinomas, Dpstar Group, Horn GmbH Gottmadingen.
The polyimide heaters market is expected to grow at a compound annual growth rate of 5.5%.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Polyimide Heaters Market Overview
4.1 Introduction
4.1.1 Market Taxonomy
4.1.2 Market Definition
4.1.3 Macro-Economic Factors Impacting the Market Growth
4.2 Polyimide Heaters Market Dynamics
4.2.1 Market Drivers
4.2.2 Market Restraints
4.2.3 Market Opportunity
4.3 Polyimide Heaters Market - Supply Chain Analysis
4.3.1 List of Key Suppliers
4.3.2 List of Key Distributors
4.3.3 List of Key Consumers
4.4 Key Forces Shaping the Polyimide Heaters Market
4.4.1 Bargaining Power of Suppliers
4.4.2 Bargaining Power of Buyers
4.4.3 Threat of Substitution
4.4.4 Threat of New Entrants
4.4.5 Competitive Rivalry
4.5 Global Polyimide Heaters Market Size & Forecast, 2018-2028
4.5.1 Polyimide Heaters Market Size and Y-o-Y Growth
4.5.2 Polyimide Heaters Market Absolute $ Opportunity
Chapter 5 Global Polyimide Heaters Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Polyimide Heaters Market Size Forecast by Type
5.2.1 Rectangle Type
5.2.2 Round Type
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Polyimide Heaters Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Polyimide Heaters Market Size Forecast by Applications
6.2.1 Medical
6.2.2 Aerospace and Defense
6.2.3 Electronics
6.2.4 Food and Beverage
6.2.5 Automotive
6.2.6 Others
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Polyimide Heaters Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Polyimide Heaters Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Polyimide Heaters Analysis and Forecast
9.1 Introduction
9.2 North America Polyimide Heaters Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Polyimide Heaters Market Size Forecast by Type
9.6.1 Rectangle Type
9.6.2 Round Type
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Polyimide Heaters Market Size Forecast by Applications
9.10.1 Medical
9.10.2 Aerospace and Defense
9.10.3 Electronics
9.10.4 Food and Beverage
9.10.5 Automotive
9.10.6 Others
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Polyimide Heaters Analysis and Forecast
10.1 Introduction
10.2 Europe Polyimide Heaters Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Polyimide Heaters Market Size Forecast by Type
10.6.1 Rectangle Type
10.6.2 Round Type
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Polyimide Heaters Market Size Forecast by Applications
10.10.1 Medical
10.10.2 Aerospace and Defense
10.10.3 Electronics
10.10.4 Food and Beverage
10.10.5 Automotive
10.10.6 Others
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Polyimide Heaters Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Polyimide Heaters Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Polyimide Heaters Market Size Forecast by Type
11.6.1 Rectangle Type
11.6.2 Round Type
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Polyimide Heaters Market Size Forecast by Applications
11.10.1 Medical
11.10.2 Aerospace and Defense
11.10.3 Electronics
11.10.4 Food and Beverage
11.10.5 Automotive
11.10.6 Others
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Polyimide Heaters Analysis and Forecast
12.1 Introduction
12.2 Latin America Polyimide Heaters Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Polyimide Heaters Market Size Forecast by Type
12.6.1 Rectangle Type
12.6.2 Round Type
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Polyimide Heaters Market Size Forecast by Applications
12.10.1 Medical
12.10.2 Aerospace and Defense
12.10.3 Electronics
12.10.4 Food and Beverage
12.10.5 Automotive
12.10.6 Others
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Polyimide Heaters Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Polyimide Heaters Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Polyimide Heaters Market Size Forecast by Type
13.6.1 Rectangle Type
13.6.2 Round Type
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Polyimide Heaters Market Size Forecast by Applications
13.10.1 Medical
13.10.2 Aerospace and Defense
13.10.3 Electronics
13.10.4 Food and Beverage
13.10.5 Automotive
13.10.6 Others
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Polyimide Heaters Market: Competitive Dashboard
14.2 Global Polyimide Heaters Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 Durex Industries
14.3.2 Watlow
14.3.3 Epec
14.3.4 Hi-Heat Industries Inc
14.3.5 Heatron, Inc
14.3.6 Bucan
14.3.7 O&M HEATER CO.,LTD
14.3.8 Wattco
14.3.9 BriskHeat
14.3.10 Birk Manufacturing, Inc
14.3.11 Chromalox
14.3.12 Tempec
14.3.13 Backer Marathon
14.3.14 All Flex
14.3.15 OMEGA
14.3.16 Sinomas
14.3.17 Dpstar Group
14.3.18 Horn GmbH Gottmadingen
