Market Overview:
The global powder injection molding market is expected to grow at a CAGR of 5.8% during the forecast period from 2018 to 2030. The growth in the market can be attributed to the increasing demand for consumer products, medical and orthodontic products, automotive components, and aerospace and defense parts. In terms of type, the stainless steel segment is expected to lead the market during the forecast period owing to its properties such as high strength-to-weight ratio, corrosion resistance, and thermal conductivity. In terms of application, the consumer products segment is projected to lead the market duringthe forecast period owingtoits growing demand for lightweight and durable components across various industries.
Product Definition:
Powder injection molding is a process for making parts from a variety of materials, including metals, composites and plastics. In the process, powdered material is injected into a mold under high pressure. The molded part then solidifies and can be used directly or further processed.
Stainless Steel:
Stainless steel is a widely used material in the plastic injection molding industry. It has several properties that make it suitable for molding, such as high strength and corrosion resistance. The cost of stainless steel depends on its grade, with the basic types being ferritic, austenitic, martensitic and duplex.
Soft Magnetic Alloys:
Soft magnetic alloys are materials containing low energy levels and high saturation flux density. The softness of these metals is due to the lack of hard-sphere moments in their structure. Soft magnets can be magnetized by electrical current or by heat; however, they do not hold their magnetism for as long as hard magnets.
Application Insights:
The consumer products segment led the global powder injection molding market and accounted for more than 34.0% of the total revenue in 2017. The growth can be attributed to increasing demand for vacuum cleaners, lawn mowers, snow throwers, etc., across the globe. In addition, rapid urbanization coupled with rising disposable income has resulted in increased spending on home appliances and equipment such as refrigerators and washing machines across various regions including Asia Pacific and Latin America over the past few years.
Regional Analysis:
Asia Pacific dominated the global market in 2017 and is expected to continue its dominance over the forecast period. The region is home to several emerging economies, including China, India, Indonesia and Malaysia. These countries are witnessing strong economic growth owing to various factors such as increasing population and consumer disposable income levels. Moreover, rising investments in infrastructure development by China and Japan are expected to have a positive impact on industry expansion over the next eight years.
Growth Factors:
- Increasing demand for lightweight and high-performance components in automotive and aerospace industries
- Growing popularity of powder injection molding among small and medium-sized enterprises
- Rising demand for medical implants made from biocompatible materials
- Proliferation of 3D printing technology that helps reduce manufacturing time and cost
- Growing awareness about the benefits of using powder injection molding over traditional manufacturing processes
Scope Of The Report
Report Attributes
Report Details
Report Title
Powder Injection Molding Market Research Report
By Type
Stainless Steel, Soft Magnetic Alloys, Titanium Alloys, Low-alloy Steel
By Application
Consumer Products, Medical And Orthodontic, Automotive, Aerospace And Defense
By Companies
RC Group, Advanced Materials Technologies, Epsom Atmix, PSM Industries, Plansee Group, Indo-US MIM Tec, ARBURG, Dynacast International, Philips-Medisize, PSM Industries, Plansee Group
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
185
Number of Tables & Figures
130
Customization Available
Yes, the report can be customized as per your need.
Global Powder Injection Molding Market Report Segments:
The global Powder Injection Molding market is segmented on the basis of:
Types
Stainless Steel, Soft Magnetic Alloys, Titanium Alloys, Low-alloy Steel
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Consumer Products, Medical And Orthodontic, Automotive, Aerospace And Defense
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- RC Group
- Advanced Materials Technologies
- Epsom Atmix
- PSM Industries
- Plansee Group
- Indo-US MIM Tec
- ARBURG
- Dynacast International
- Philips-Medisize
- PSM Industries
- Plansee Group
Highlights of The Powder Injection Molding Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- Stainless Steel
- Soft Magnetic Alloys
- Titanium Alloys
- Low-alloy Steel
- By Application:
- Consumer Products
- Medical And Orthodontic
- Automotive
- Aerospace And Defense
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Powder Injection Molding Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
Powder injection molding is a manufacturing process that uses a machine to create objects by injecting fine powder into molds. The object is then removed from the mold and either finished or used in the manufacturing process.
Some of the key players operating in the powder injection molding market are RC Group, Advanced Materials Technologies, Epsom Atmix, PSM Industries, Plansee Group, Indo-US MIM Tec, ARBURG, Dynacast International, Philips-Medisize, PSM Industries, Plansee Group.
The powder injection molding market is expected to register a CAGR of 5.8%.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Powder Injection Molding Market Overview 4.1 Introduction 4.1.1 Market Taxonomy 4.1.2 Market Definition 4.1.3 Macro-Economic Factors Impacting the Market Growth 4.2 Powder Injection Molding Market Dynamics 4.2.1 Market Drivers 4.2.2 Market Restraints 4.2.3 Market Opportunity 4.3 Powder Injection Molding Market - Supply Chain Analysis 4.3.1 List of Key Suppliers 4.3.2 List of Key Distributors 4.3.3 List of Key Consumers 4.4 Key Forces Shaping the Powder Injection Molding Market 4.4.1 Bargaining Power of Suppliers 4.4.2 Bargaining Power of Buyers 4.4.3 Threat of Substitution 4.4.4 Threat of New Entrants 4.4.5 Competitive Rivalry 4.5 Global Powder Injection Molding Market Size & Forecast, 2018-2028 4.5.1 Powder Injection Molding Market Size and Y-o-Y Growth 4.5.2 Powder Injection Molding Market Absolute $ Opportunity
Chapter 5 Global Powder Injection Molding Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Powder Injection Molding Market Size Forecast by Type
5.2.1 Stainless Steel
5.2.2 Soft Magnetic Alloys
5.2.3 Titanium Alloys
5.2.4 Low-alloy Steel
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Powder Injection Molding Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Powder Injection Molding Market Size Forecast by Applications
6.2.1 Consumer Products
6.2.2 Medical And Orthodontic
6.2.3 Automotive
6.2.4 Aerospace And Defense
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Powder Injection Molding Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Powder Injection Molding Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Powder Injection Molding Analysis and Forecast
9.1 Introduction
9.2 North America Powder Injection Molding Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Powder Injection Molding Market Size Forecast by Type
9.6.1 Stainless Steel
9.6.2 Soft Magnetic Alloys
9.6.3 Titanium Alloys
9.6.4 Low-alloy Steel
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Powder Injection Molding Market Size Forecast by Applications
9.10.1 Consumer Products
9.10.2 Medical And Orthodontic
9.10.3 Automotive
9.10.4 Aerospace And Defense
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Powder Injection Molding Analysis and Forecast
10.1 Introduction
10.2 Europe Powder Injection Molding Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Powder Injection Molding Market Size Forecast by Type
10.6.1 Stainless Steel
10.6.2 Soft Magnetic Alloys
10.6.3 Titanium Alloys
10.6.4 Low-alloy Steel
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Powder Injection Molding Market Size Forecast by Applications
10.10.1 Consumer Products
10.10.2 Medical And Orthodontic
10.10.3 Automotive
10.10.4 Aerospace And Defense
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Powder Injection Molding Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Powder Injection Molding Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Powder Injection Molding Market Size Forecast by Type
11.6.1 Stainless Steel
11.6.2 Soft Magnetic Alloys
11.6.3 Titanium Alloys
11.6.4 Low-alloy Steel
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Powder Injection Molding Market Size Forecast by Applications
11.10.1 Consumer Products
11.10.2 Medical And Orthodontic
11.10.3 Automotive
11.10.4 Aerospace And Defense
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Powder Injection Molding Analysis and Forecast
12.1 Introduction
12.2 Latin America Powder Injection Molding Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Powder Injection Molding Market Size Forecast by Type
12.6.1 Stainless Steel
12.6.2 Soft Magnetic Alloys
12.6.3 Titanium Alloys
12.6.4 Low-alloy Steel
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Powder Injection Molding Market Size Forecast by Applications
12.10.1 Consumer Products
12.10.2 Medical And Orthodontic
12.10.3 Automotive
12.10.4 Aerospace And Defense
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Powder Injection Molding Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Powder Injection Molding Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Powder Injection Molding Market Size Forecast by Type
13.6.1 Stainless Steel
13.6.2 Soft Magnetic Alloys
13.6.3 Titanium Alloys
13.6.4 Low-alloy Steel
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Powder Injection Molding Market Size Forecast by Applications
13.10.1 Consumer Products
13.10.2 Medical And Orthodontic
13.10.3 Automotive
13.10.4 Aerospace And Defense
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Powder Injection Molding Market: Competitive Dashboard
14.2 Global Powder Injection Molding Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 RC Group
14.3.2 Advanced Materials Technologies
14.3.3 Epsom Atmix
14.3.4 PSM Industries
14.3.5 Plansee Group
14.3.6 Indo-US MIM Tec
14.3.7 ARBURG
14.3.8 Dynacast International
14.3.9 Philips-Medisize
14.3.10 PSM Industries
14.3.11 Plansee Group