Market Overview:
The global PPR pipe fittings mould market is expected to grow at a CAGR of 5.5% during the forecast period from 2018 to 2030. The growth in this market can be attributed to the increasing demand for PPR pipes and fittings in various applications, such as automotive, medical, electrical, industrial and consumer goods. In addition, the growing awareness about energy conservation is also propelling the demand for PPR pipes and fittings globally.
Product Definition:
PPR Pipe Fittings Mould is a mould used to produce PPR pipe fittings. It is important because it can help factories produce large quantities of pipe fittings in a short time.
45 Degree Elbow Mould:
45 degree elbow mould is a kind of machine used to form plastic parts by means of molds. It has an advantage over the traditional methods as it offers more flexibility in terms of design and size. The 45 degree elbow mould can be used for producing both one-piece and two-piece plastic fittings which are required in pipe fitting industry.
One major application area where 45 degree elbow is extensively used is water supply systems, especially for residential purposes.
90 Degree Elbow Mould:
90 degree elbow mould is a type of pipe fitting used in petroleum, chemical and refinery industries. It consists of two parts; male part and female part connected by an elbow. The shape allows smooth flow of fluids in pipes at angles greater than 90 degrees without leakage or backflow.
The global 90 degree elbow mould market size was valued at USD 1,37,500 thousand in 2016.
Application Insights:
The global PPR pipe fittings market is segmented by application into automotive, medical, electrical industrial and consumer goods. The automotive application segment accounted for the largest share in 2017 owing to the extensive use of PPR pipes and fittings in passenger cars and commercial vehicles. In addition, growing demand for fuel efficient vehicles with low emissions will drive this industry over the forecast period.
Pipe fitting is used extensively in aircraft manufacturing as they are manufactured using lightweight aluminum alloys that are extruded into thin sheets; these sheets are then formed into complex shapes through a variety of processes including cold-forming, hot-forming & welding. These products play an important role in maintaining fluid flow inside an aircraft engine without any leakageages during take off or landing operations which can lead to fatal accidents if proper care is not taken while assembling such components together.
Regional Analysis:
Asia Pacific was the leading revenue contributor in 2016 and is expected to continue its dominance over the forecast period. The region is home to some of the major manufacturing hubs, such as China, India, Japan and South Korea. These countries are also involved in extensive industrialization along with rapid urbanization resulting in a growing need for improved infrastructure facilities.
The Asia Pacific regional market has observed an increasing demand for PPR pipes owing to their superior performance compared to other materials used for piping systems including steel and plastic pipes. Moreover, factors such as low maintenance cost associated with metal piping systems coupled with high strength requirements of various applications have resulted in increased product adoption across industries including oil & gas, petrochemical etc.
North America accounted for a significant share of global revenue due to presence of numerous end-users operating within various sectors including construction & engineering; automotive; food & beverage; chemical processing among others.
Growth Factors:
- Increasing demand from construction and infrastructure sectors
- Growing awareness about the benefits of using PPR pipe fittings
- Rising popularity of green buildings
- Technological advancements in manufacturing process of PPR pipe fittings
- Growing demand for plastic pipes in developing countries
Scope Of The Report
Report Attributes
Report Details
Report Title
PPR Pipe Fittings Mould Market Research Report
By Type
45 Degree Elbow Mould, 90 Degree Elbow Mould, Tee Mould, Others
By Application
Automotive, Medical, Electrical, Industrial, Consumer Goods, Others
By Companies
Zhejiang Taizhou Huangyan Chuangyuan Mould Factory, Yusheng Mould, Sino Pipe Fitting Mould Co., ZHONGDA INT'L Group, Shenzhen ADTC, Taizhou Saiweiyue Mould & Plastic Co., Ltd., Taizhou Huangyan Hongchang mould Co., Ltd., Ehao Plastic Group, Longxin Mould, Taizhou Yuanrun Mould industry co., LTD., Donsen, Mingyu Mould, Taizhou Huangyan UJIN mould
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
220
Number of Tables & Figures
154
Customization Available
Yes, the report can be customized as per your need.
Global PPR Pipe Fittings Mould Market Report Segments:
The global PPR Pipe Fittings Mould market is segmented on the basis of:
Types
45 Degree Elbow Mould, 90 Degree Elbow Mould, Tee Mould, Others
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Automotive, Medical, Electrical, Industrial, Consumer Goods, Others
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- Zhejiang Taizhou Huangyan Chuangyuan Mould Factory
- Yusheng Mould
- Sino Pipe Fitting Mould Co.
- ZHONGDA INT'L Group
- Shenzhen ADTC
- Taizhou Saiweiyue Mould & Plastic Co., Ltd.
- Taizhou Huangyan Hongchang mould Co., Ltd.
- Ehao Plastic Group
- Longxin Mould
- Taizhou Yuanrun Mould industry co., LTD.
- Donsen
- Mingyu Mould
- Taizhou Huangyan UJIN mould
Highlights of The PPR Pipe Fittings Mould Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- 45 Degree Elbow Mould
- 90 Degree Elbow Mould
- Tee Mould
- Others
- By Application:
- Automotive
- Medical
- Electrical
- Industrial
- Consumer Goods
- Others
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the PPR Pipe Fittings Mould Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
PPR Pipe Fittings Mould is a type of mould used to create plastic pipe fittings. It is made up of two halves that fit together like a puzzle, and it can be filled with plastic material to create the desired shape. The mould is then heated until the plastic melts, and the fittings are created.
Some of the major companies in the ppr pipe fittings mould market are Zhejiang Taizhou Huangyan Chuangyuan Mould Factory, Yusheng Mould, Sino Pipe Fitting Mould Co., ZHONGDA INT'L Group, Shenzhen ADTC, Taizhou Saiweiyue Mould & Plastic Co., Ltd., Taizhou Huangyan Hongchang mould Co., Ltd., Ehao Plastic Group, Longxin Mould, Taizhou Yuanrun Mould industry co., LTD., Donsen, Mingyu Mould, Taizhou Huangyan UJIN mould.
The ppr pipe fittings mould market is expected to grow at a compound annual growth rate of 5.5%.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 PPR Pipe Fittings Mould Market Overview 4.1 Introduction 4.1.1 Market Taxonomy 4.1.2 Market Definition 4.1.3 Macro-Economic Factors Impacting the Market Growth 4.2 PPR Pipe Fittings Mould Market Dynamics 4.2.1 Market Drivers 4.2.2 Market Restraints 4.2.3 Market Opportunity 4.3 PPR Pipe Fittings Mould Market - Supply Chain Analysis 4.3.1 List of Key Suppliers 4.3.2 List of Key Distributors 4.3.3 List of Key Consumers 4.4 Key Forces Shaping the PPR Pipe Fittings Mould Market 4.4.1 Bargaining Power of Suppliers 4.4.2 Bargaining Power of Buyers 4.4.3 Threat of Substitution 4.4.4 Threat of New Entrants 4.4.5 Competitive Rivalry 4.5 Global PPR Pipe Fittings Mould Market Size & Forecast, 2018-2028 4.5.1 PPR Pipe Fittings Mould Market Size and Y-o-Y Growth 4.5.2 PPR Pipe Fittings Mould Market Absolute $ Opportunity
Chapter 5 Global PPR Pipe Fittings Mould Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 PPR Pipe Fittings Mould Market Size Forecast by Type
5.2.1 45 Degree Elbow Mould
5.2.2 90 Degree Elbow Mould
5.2.3 Tee Mould
5.2.4 Others
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global PPR Pipe Fittings Mould Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 PPR Pipe Fittings Mould Market Size Forecast by Applications
6.2.1 Automotive
6.2.2 Medical
6.2.3 Electrical
6.2.4 Industrial
6.2.5 Consumer Goods
6.2.6 Others
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global PPR Pipe Fittings Mould Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 PPR Pipe Fittings Mould Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America PPR Pipe Fittings Mould Analysis and Forecast
9.1 Introduction
9.2 North America PPR Pipe Fittings Mould Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America PPR Pipe Fittings Mould Market Size Forecast by Type
9.6.1 45 Degree Elbow Mould
9.6.2 90 Degree Elbow Mould
9.6.3 Tee Mould
9.6.4 Others
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America PPR Pipe Fittings Mould Market Size Forecast by Applications
9.10.1 Automotive
9.10.2 Medical
9.10.3 Electrical
9.10.4 Industrial
9.10.5 Consumer Goods
9.10.6 Others
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe PPR Pipe Fittings Mould Analysis and Forecast
10.1 Introduction
10.2 Europe PPR Pipe Fittings Mould Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe PPR Pipe Fittings Mould Market Size Forecast by Type
10.6.1 45 Degree Elbow Mould
10.6.2 90 Degree Elbow Mould
10.6.3 Tee Mould
10.6.4 Others
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe PPR Pipe Fittings Mould Market Size Forecast by Applications
10.10.1 Automotive
10.10.2 Medical
10.10.3 Electrical
10.10.4 Industrial
10.10.5 Consumer Goods
10.10.6 Others
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific PPR Pipe Fittings Mould Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific PPR Pipe Fittings Mould Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific PPR Pipe Fittings Mould Market Size Forecast by Type
11.6.1 45 Degree Elbow Mould
11.6.2 90 Degree Elbow Mould
11.6.3 Tee Mould
11.6.4 Others
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific PPR Pipe Fittings Mould Market Size Forecast by Applications
11.10.1 Automotive
11.10.2 Medical
11.10.3 Electrical
11.10.4 Industrial
11.10.5 Consumer Goods
11.10.6 Others
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America PPR Pipe Fittings Mould Analysis and Forecast
12.1 Introduction
12.2 Latin America PPR Pipe Fittings Mould Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America PPR Pipe Fittings Mould Market Size Forecast by Type
12.6.1 45 Degree Elbow Mould
12.6.2 90 Degree Elbow Mould
12.6.3 Tee Mould
12.6.4 Others
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America PPR Pipe Fittings Mould Market Size Forecast by Applications
12.10.1 Automotive
12.10.2 Medical
12.10.3 Electrical
12.10.4 Industrial
12.10.5 Consumer Goods
12.10.6 Others
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) PPR Pipe Fittings Mould Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) PPR Pipe Fittings Mould Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) PPR Pipe Fittings Mould Market Size Forecast by Type
13.6.1 45 Degree Elbow Mould
13.6.2 90 Degree Elbow Mould
13.6.3 Tee Mould
13.6.4 Others
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) PPR Pipe Fittings Mould Market Size Forecast by Applications
13.10.1 Automotive
13.10.2 Medical
13.10.3 Electrical
13.10.4 Industrial
13.10.5 Consumer Goods
13.10.6 Others
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 PPR Pipe Fittings Mould Market: Competitive Dashboard
14.2 Global PPR Pipe Fittings Mould Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 Zhejiang Taizhou Huangyan Chuangyuan Mould Factory
14.3.2 Yusheng Mould
14.3.3 Sino Pipe Fitting Mould Co.
14.3.4 ZHONGDA INT'L Group
14.3.5 Shenzhen ADTC
14.3.6 Taizhou Saiweiyue Mould & Plastic Co., Ltd.
14.3.7 Taizhou Huangyan Hongchang mould Co., Ltd.
14.3.8 Ehao Plastic Group
14.3.9 Longxin Mould
14.3.10 Taizhou Yuanrun Mould industry co., LTD.
14.3.11 Donsen
14.3.12 Mingyu Mould
14.3.13 Taizhou Huangyan UJIN mould