Market Overview:
The global single-ply roofing membranes market is expected to grow at a CAGR of 5.5% from 2018 to 2030. The growth in the market can be attributed to the increasing demand for single-ply roofing membranes in residential, commercial, and industrial applications. PVC is the most commonly used type of single-ply roofing membrane and is expected to dominate the market during the forecast period. Asia Pacific is projected to be the fastest growing region in terms of revenue during the forecast period.
Product Definition:
A single-ply roofing membrane is a waterproof sheeting material used in commercial and industrial buildings to protect the roof deck from water damage. The membrane is typically made of plastic, rubber, or bitumen and can be installed in a variety of ways depending on the type of roof deck. Single-ply membranes are popular because they are easy to install and relatively cheap compared to other types of roofing materials.
PVC:
Polyvinyl Chloride (PVC) is a thermoplastic polymer, which can be either be injection molded or extruded. It has the ability to weather and withstand ultraviolet radiation, which makes it suitable for use in roofing membranes. PVC membranes are available in various colors and hence are used as an important component of waterproofing systems that protect roofs from rainwater penetration, algae growth & surface cracking along with providing insulation against heat gain or loss.
EPDM:
EPDM is short for Ethylene Propylene Diene Monomer and it is a polymer used in the manufacturing of single-ply roofing membranes. It has high resistance to ultraviolet rays, which makes it resistant to algae growth and degradation. EPDM also provides excellent thermal insulation, sound & water vapor control properties along with fire protection as per standard NFPI-1 (National Fire Protection Institute - 1).
Application Insights:
The residential application segment accounted for the largest revenue share of over 50% in 2017. The demand is expected to be high owing to the low cost and easy installation associated with single-ply roofing membranes. Moreover, increasing urbanization along with rising disposable income levels in developing countries including China, India and Brazil is expected to boost product demand in the residential sector over the forecast period.
Single-ply roofing membranes are used for both new construction as well as renovation projects on account of their ease of use and low labor costs involved during its installation process. These products are also suitable for applications where there is a direct exposure to harsh weather conditions such as snow, ice or heavy rains due to its water resistance feature.
The commercial application segment was valued at USD 1,227 million in 2017 owing to growing infrastructural developments across corporate offices coupled with high growth rate businesses across various industries globally Single-ply roofing membranes have been witnessing significant adoption due by major markets including North America.
Regional Analysis:
Europe dominated the global market in 2017, accounting for over 30.0% of the total revenue share. The region is expected to witness a considerable growth rate of 4.6% from 2018 to 2030 owing to increasing demand for green buildings and renovation activities in countries, such as Germany, U.K.
The Asia Pacific is projected to be one of the fastest-growing regional markets during the forecast years on account of rapid urbanization.
Growth Factors:
- Growing demand for single-ply roofing membranes in the construction industry as a result of their superior properties such as durability, weather resistance, and low maintenance.
- Increasing awareness about the benefits of single-ply roofing membranes among architects, contractors, and property owners.
- Technological advancements in the manufacturing of single-ply roofing membranes that have led to improved performance and quality.
- Rising demand for green roofs, which are increasingly being specified with single-ply roofing membranes due to their environmental benefits.
- Growing popularity of solar PV systems among homeowners, which is resulting in an increase in the use of single-ply roofing membranes for rooftop installations
Scope Of The Report
Report Attributes
Report Details
Report Title
Single-Ply Roofing Membranes Market Research Report
By Type
PVC, EPDM, TPO
By Application
Residential, Commercial, Industrial
By Companies
Soprema Group, GAF, Sika, Duro-Last, Johns Manville, TECHNONICOL Corporation, Firestone, Carlisle, CKS, Versico, Soprema Group, Hongyuan Waterproof, FiberTite, Fosroc, Bauder, IB Roof Systems, Custom Seal Roofing, Joaboa Technology, Polyglass, Oriental Yuhong
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
217
Number of Tables & Figures
152
Customization Available
Yes, the report can be customized as per your need.
Global Single-Ply Roofing Membranes Market Report Segments:
The global Single-Ply Roofing Membranes market is segmented on the basis of:
Types
PVC, EPDM, TPO
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Residential, Commercial, Industrial
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- Soprema Group
- GAF
- Sika
- Duro-Last
- Johns Manville
- TECHNONICOL Corporation
- Firestone
- Carlisle
- CKS
- Versico
- Soprema Group
- Hongyuan Waterproof
- FiberTite
- Fosroc
- Bauder
- IB Roof Systems
- Custom Seal Roofing
- Joaboa Technology
- Polyglass
- Oriental Yuhong
Highlights of The Single-Ply Roofing Membranes Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- PVC
- EPDM
- TPO
- By Application:
- Residential
- Commercial
- Industrial
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Single-Ply Roofing Membranes Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
Single-ply roofing membranes are made of a single sheet of material that is installed over the roof deck. This type of membrane is less expensive than traditional roofs and can be more easily repaired or replaced.
Some of the major players in the single-ply roofing membranes market are Soprema Group, GAF, Sika, Duro-Last, Johns Manville, TECHNONICOL Corporation, Firestone, Carlisle, CKS, Versico, Soprema Group, Hongyuan Waterproof, FiberTite, Fosroc, Bauder, IB Roof Systems, Custom Seal Roofing, Joaboa Technology, Polyglass, Oriental Yuhong.
The single-ply roofing membranes market is expected to grow at a compound annual growth rate of 5.5%.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Single-Ply Roofing Membranes Market Overview
4.1 Introduction
4.1.1 Market Taxonomy
4.1.2 Market Definition
4.1.3 Macro-Economic Factors Impacting the Market Growth
4.2 Single-Ply Roofing Membranes Market Dynamics
4.2.1 Market Drivers
4.2.2 Market Restraints
4.2.3 Market Opportunity
4.3 Single-Ply Roofing Membranes Market - Supply Chain Analysis
4.3.1 List of Key Suppliers
4.3.2 List of Key Distributors
4.3.3 List of Key Consumers
4.4 Key Forces Shaping the Single-Ply Roofing Membranes Market
4.4.1 Bargaining Power of Suppliers
4.4.2 Bargaining Power of Buyers
4.4.3 Threat of Substitution
4.4.4 Threat of New Entrants
4.4.5 Competitive Rivalry
4.5 Global Single-Ply Roofing Membranes Market Size & Forecast, 2018-2028
4.5.1 Single-Ply Roofing Membranes Market Size and Y-o-Y Growth
4.5.2 Single-Ply Roofing Membranes Market Absolute $ Opportunity
Chapter 5 Global Single-Ply Roofing Membranes Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Single-Ply Roofing Membranes Market Size Forecast by Type
5.2.1 PVC
5.2.2 EPDM
5.2.3 TPO
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Single-Ply Roofing Membranes Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Single-Ply Roofing Membranes Market Size Forecast by Applications
6.2.1 Residential
6.2.2 Commercial
6.2.3 Industrial
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Single-Ply Roofing Membranes Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Single-Ply Roofing Membranes Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Single-Ply Roofing Membranes Analysis and Forecast
9.1 Introduction
9.2 North America Single-Ply Roofing Membranes Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Single-Ply Roofing Membranes Market Size Forecast by Type
9.6.1 PVC
9.6.2 EPDM
9.6.3 TPO
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Single-Ply Roofing Membranes Market Size Forecast by Applications
9.10.1 Residential
9.10.2 Commercial
9.10.3 Industrial
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Single-Ply Roofing Membranes Analysis and Forecast
10.1 Introduction
10.2 Europe Single-Ply Roofing Membranes Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Single-Ply Roofing Membranes Market Size Forecast by Type
10.6.1 PVC
10.6.2 EPDM
10.6.3 TPO
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Single-Ply Roofing Membranes Market Size Forecast by Applications
10.10.1 Residential
10.10.2 Commercial
10.10.3 Industrial
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Single-Ply Roofing Membranes Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Single-Ply Roofing Membranes Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Single-Ply Roofing Membranes Market Size Forecast by Type
11.6.1 PVC
11.6.2 EPDM
11.6.3 TPO
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Single-Ply Roofing Membranes Market Size Forecast by Applications
11.10.1 Residential
11.10.2 Commercial
11.10.3 Industrial
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Single-Ply Roofing Membranes Analysis and Forecast
12.1 Introduction
12.2 Latin America Single-Ply Roofing Membranes Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Single-Ply Roofing Membranes Market Size Forecast by Type
12.6.1 PVC
12.6.2 EPDM
12.6.3 TPO
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Single-Ply Roofing Membranes Market Size Forecast by Applications
12.10.1 Residential
12.10.2 Commercial
12.10.3 Industrial
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Single-Ply Roofing Membranes Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Single-Ply Roofing Membranes Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Single-Ply Roofing Membranes Market Size Forecast by Type
13.6.1 PVC
13.6.2 EPDM
13.6.3 TPO
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Single-Ply Roofing Membranes Market Size Forecast by Applications
13.10.1 Residential
13.10.2 Commercial
13.10.3 Industrial
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Single-Ply Roofing Membranes Market: Competitive Dashboard
14.2 Global Single-Ply Roofing Membranes Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 Soprema Group
14.3.2 GAF
14.3.3 Sika
14.3.4 Duro-Last
14.3.5 Johns Manville
14.3.6 TECHNONICOL Corporation
14.3.7 Firestone
14.3.8 Carlisle
14.3.9 CKS
14.3.10 Versico
14.3.11 Soprema Group
14.3.12 Hongyuan Waterproof
14.3.13 FiberTite
14.3.14 Fosroc
14.3.15 Bauder
14.3.16 IB Roof Systems
14.3.17 Custom Seal Roofing
14.3.18 Joaboa Technology
14.3.19 Polyglass
14.3.20 Oriental Yuhong
