Market Overview:
The global spray units market is expected to grow at a CAGR of 5.5% during the forecast period from 2018 to 2030. The growth in the market can be attributed to the increasing demand for spray units from various end-use industries, such as automotive, shipping, and equipment manufacturing. In terms of type, the low pressure segment is expected to dominate the global spray units market during the forecast period. This can be attributed to its low cost and easy installation as compared to high pressure systems. In terms of application, the automotive industry is expected to account for a major share of the global spray units market during 2018-2030 owing to rising demand for automobiles across regions.
Product Definition:
A spray unit is a device that disperses liquid or gas in the form of a spray. The importance of spray units varies depending on the application. In some cases, they are used to apply a coating to a surface, while in others they are used to cool an object or atmosphere.
Low Pressure:
Low pressure is a measurement of force or torque that is applied to the spray unit. The lower the pressure, the higher will be its efficiency in delivering liquid fertilizers onto the field. Low-pressure systems are usually powered by electric motors and can be portable or fixed as per requirement.
The global low-pressure system’s market size was valued at USD 1,849.6 million in 2016.
High Pressure:
High pressure is a stream with a high rate of flow and/or a large volume. The term is generally used for streams that are under 60 liters per minute or 688 cu. in. per minute (l/min). High pressure units are also known as HP, bar or mbar, and MPa; according to the unit of measurement chosen.
Application Insights:
The automotive industry application segment accounted for the largest revenue share in 2017. The global automotive industry is witnessing a paradigm shift due to rising demand for electric vehicles. Electric vehicles require low-pressure spray equipment as they are more prone to corrosion and other damages if exposed to water or moisture at high pressure levels. Therefore, the automotive industry is likely to adopt new technology in its production processes, which will eventually drive product demand over the forecast period.
Equipment manufacture industries include oil & gas refineries and chemical plants that produce hydrogen peroxide solutions, caustic soda solution etc.
Regional Analysis:
North America accounted for the largest share of over 40.0% in 2017, owing to the presence of a large number of manufacturers in countries such as U.S., Canada, and Mexico. The region is expected to maintain its dominance throughout the forecast period on account of increasing demand from end-users such as automotive industry and equipment manufacturing industry.
Asia Pacific is anticipated to witness significant growth over the forecast period owing to rising disposable income coupled with improving economic conditions in emerging economies including China.
Growth Factors:
- Increasing demand for hygiene and sanitation across the globe
- Rising awareness about the benefits of using spray units
- Technological advancements in spray unit design and functionality
- Growing popularity of eco-friendly and organic products
- Proliferation of small businesses that use spray units for production
Scope Of The Report
Report Attributes
Report Details
Report Title
Spray Units Market Research Report
By Type
Low Pressure, High Pressure
By Application
Automotive Industry, Shipping Industry, Equipment Manufacture Inddustry, Others
By Companies
Ecco Fishing Supplies, Sames Kremlin, Voortman Steel Machinery, Magnum Venus Products, Lincoln, Exitflex, ZUWA-Zumpe, Kahl, Matrasur Composites, Larius, Wiwa
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
161
Number of Tables & Figures
113
Customization Available
Yes, the report can be customized as per your need.
Global Spray Units Market Report Segments:
The global Spray Units market is segmented on the basis of:
Types
Low Pressure, High Pressure
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Automotive Industry, Shipping Industry, Equipment Manufacture Inddustry, Others
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- Ecco Fishing Supplies
- Sames Kremlin
- Voortman Steel Machinery
- Magnum Venus Products
- Lincoln
- Exitflex
- ZUWA-Zumpe
- Kahl
- Matrasur Composites
- Larius
- Wiwa
Highlights of The Spray Units Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- Low Pressure
- High Pressure
- By Application:
- Automotive Industry
- Shipping Industry
- Equipment Manufacture Inddustry
- Others
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Spray Units Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
Spray units are a measure of the amount of water that is used to produce a given level of mist or spray.
Some of the major players in the spray units market are Ecco Fishing Supplies, Sames Kremlin, Voortman Steel Machinery, Magnum Venus Products, Lincoln, Exitflex, ZUWA-Zumpe, Kahl, Matrasur Composites, Larius, Wiwa.
The spray units market is expected to grow at a compound annual growth rate of 5.5%.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Spray Units Market Overview 4.1 Introduction 4.1.1 Market Taxonomy 4.1.2 Market Definition 4.1.3 Macro-Economic Factors Impacting the Market Growth 4.2 Spray Units Market Dynamics 4.2.1 Market Drivers 4.2.2 Market Restraints 4.2.3 Market Opportunity 4.3 Spray Units Market - Supply Chain Analysis 4.3.1 List of Key Suppliers 4.3.2 List of Key Distributors 4.3.3 List of Key Consumers 4.4 Key Forces Shaping the Spray Units Market 4.4.1 Bargaining Power of Suppliers 4.4.2 Bargaining Power of Buyers 4.4.3 Threat of Substitution 4.4.4 Threat of New Entrants 4.4.5 Competitive Rivalry 4.5 Global Spray Units Market Size & Forecast, 2020-2028 4.5.1 Spray Units Market Size and Y-o-Y Growth 4.5.2 Spray Units Market Absolute $ Opportunity
Chapter 5 Global Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Market Size Forecast by Type
5.2.1 Low Pressure
5.2.2 High Pressure
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Market Size Forecast by Applications
6.2.1 Automotive Industry
6.2.2 Shipping Industry
6.2.3 Equipment Manufacture Inddustry
6.2.4 Others
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Spray Units Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Spray Units Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Analysis and Forecast
9.1 Introduction
9.2 North America Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Market Size Forecast by Type
9.6.1 Low Pressure
9.6.2 High Pressure
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Market Size Forecast by Applications
9.10.1 Automotive Industry
9.10.2 Shipping Industry
9.10.3 Equipment Manufacture Inddustry
9.10.4 Others
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Analysis and Forecast
10.1 Introduction
10.2 Europe Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Market Size Forecast by Type
10.6.1 Low Pressure
10.6.2 High Pressure
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Market Size Forecast by Applications
10.10.1 Automotive Industry
10.10.2 Shipping Industry
10.10.3 Equipment Manufacture Inddustry
10.10.4 Others
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Market Size Forecast by Type
11.6.1 Low Pressure
11.6.2 High Pressure
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Market Size Forecast by Applications
11.10.1 Automotive Industry
11.10.2 Shipping Industry
11.10.3 Equipment Manufacture Inddustry
11.10.4 Others
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Analysis and Forecast
12.1 Introduction
12.2 Latin America Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Market Size Forecast by Type
12.6.1 Low Pressure
12.6.2 High Pressure
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Market Size Forecast by Applications
12.10.1 Automotive Industry
12.10.2 Shipping Industry
12.10.3 Equipment Manufacture Inddustry
12.10.4 Others
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Market Size Forecast by Type
13.6.1 Low Pressure
13.6.2 High Pressure
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Market Size Forecast by Applications
13.10.1 Automotive Industry
13.10.2 Shipping Industry
13.10.3 Equipment Manufacture Inddustry
13.10.4 Others
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Spray Units Market: Competitive Dashboard
14.2 Global Spray Units Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 Ecco Fishing Supplies
14.3.2 Sames Kremlin
14.3.3 Voortman Steel Machinery
14.3.4 Magnum Venus Products
14.3.5 Lincoln
14.3.6 Exitflex
14.3.7 ZUWA-Zumpe
14.3.8 Kahl
14.3.9 Matrasur Composites
14.3.10 Larius
14.3.11 Wiwa