Market Overview:
The global spray valve controller market is expected to grow at a CAGR of 5.5% during the forecast period from 2018 to 2030. The market growth can be attributed to the increasing demand for automatic spray valve controllers in various applications, such as conformal coating application, applying lubricant, marking application, and others. In addition, the growing demand for manual spray valve controllers from small- and medium-sized enterprises is also contributing to the growth of this market. However, factors such as high installation and maintenance costs may restrain the growth of this market during the forecast period.
Product Definition:
A spray valve controller is a device used to control the flow of liquid from a spray nozzle. It can be used to adjust the width and intensity of the stream, as well as shut it off completely.
Manual:
The manual is a device that controls the flow of liquid or gas by means of a valve. The market for manual is segmented on the basis of type which includes diaphragm, piston, and others. Diaphragm was one of the major segments in 2014 owing to its rising demand in HVAC industry and also due to technological advancements such as improved design with high efficiency.
Automatic:
The automatic is a device or mechanism that performs a task without human intervention. It is used in spray valve controller to reduce the flow rate of liquid by opening and closing the valve according to requirement. The most commonly used automatic are solenoid, diaphragm, and piston.
Application Insights:
Conformal coating application segment led the global spray valve controller market in 2017. Conformal coatings are used for manufacturing various industrial components including valves, pipes and tanks. The demand for conformal coatings is expected to witness growth due to their use in applications such as oil & gas, petrochemicals and pharmaceuticals among others.
Spray painting is a technique of applying paint using an airless gun or sprayer that uses high pressure water sprays to apply the desired amount of paint on any surface quickly with less brush strokes and better coverage compared to conventional methods such as roller brushes or foam brushes. This method reduces wastage of paints while increasing productivity significantly over conventional methods owing to its efficiency at low cost per unit area when compared with other techniques such as high-pressure spraying equipment which requires more power but provides higher efficiency than traditional low-pressure equipment does.
Regional Analysis:
North America accounted for the largest share in 2017. The region is expected to maintain its dominance over the forecast period owing to presence of a large number of automotive manufacturers and high adoption rate of automation technologies across various industries. In addition, growing use of electric vehicles is anticipated to drive demand for electric spray valves over the next eight years.
Asia Pacific is projected to be one of the fastest-growing regions during the forecast period due to rising industrialization and increasing population in emerging countries such as China, India, Indonesia, Vietnam among others will boost product demand across various applications.
Growth Factors:
- Increasing demand for water conservation and efficient irrigation systems
- Rising awareness about the benefits of using spray valves for irrigation
- Technological advancements in spray valve controllers that offer enhanced performance and efficiency
- Growing popularity of precision agriculture and its need for accurate irrigation control
- Proliferation of smart farming technologies that can optimize water usage through real-time monitoring and controls
Scope Of The Report
Report Attributes
Report Details
Report Title
Spray Valve Controller Market Research Report
By Type
Manual, Automatic
By Application
Conformal Coating Application, Applying Lubricant, Marking Application, Others
By Companies
Techcon, Nordson, Fisnar, TIR, SAN-EI TECH, Musashi, TeeJet, Loctite, Adhesive Dispensing Limited
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
152
Number of Tables & Figures
107
Customization Available
Yes, the report can be customized as per your need.
Global Spray Valve Controller Market Report Segments:
The global Spray Valve Controller market is segmented on the basis of:
Types
Manual, Automatic
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Conformal Coating Application, Applying Lubricant, Marking Application, Others
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- Techcon
- Nordson
- Fisnar
- TIR
- SAN-EI TECH
- Musashi
- TeeJet
- Loctite
- Adhesive Dispensing Limited
Highlights of The Spray Valve Controller Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- Manual
- Automatic
- By Application:
- Conformal Coating Application
- Applying Lubricant
- Marking Application
- Others
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Spray Valve Controller Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
A spray valve controller is a device that helps to control the flow of liquid from a spray nozzle. It can be used to adjust the amount of liquid being sprayed, or it can be used to stop the spraying altogether.
Some of the major companies in the spray valve controller market are Techcon, Nordson, Fisnar, TIR, SAN-EI TECH, Musashi, TeeJet, Loctite, Adhesive Dispensing Limited.
The spray valve controller market is expected to register a CAGR of 5.5%.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Spray Valve Controller Market Overview
4.1 Introduction
4.1.1 Market Taxonomy
4.1.2 Market Definition
4.1.3 Macro-Economic Factors Impacting the Market Growth
4.2 Spray Valve Controller Market Dynamics
4.2.1 Market Drivers
4.2.2 Market Restraints
4.2.3 Market Opportunity
4.3 Spray Valve Controller Market - Supply Chain Analysis
4.3.1 List of Key Suppliers
4.3.2 List of Key Distributors
4.3.3 List of Key Consumers
4.4 Key Forces Shaping the Spray Valve Controller Market
4.4.1 Bargaining Power of Suppliers
4.4.2 Bargaining Power of Buyers
4.4.3 Threat of Substitution
4.4.4 Threat of New Entrants
4.4.5 Competitive Rivalry
4.5 Global Spray Valve Controller Market Size & Forecast, 2020-2028
4.5.1 Spray Valve Controller Market Size and Y-o-Y Growth
4.5.2 Spray Valve Controller Market Absolute $ Opportunity
Chapter 5 Global Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Market Size Forecast by Type
5.2.1 Manual
5.2.2 Automatic
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Market Size Forecast by Applications
6.2.1 Conformal Coating Application
6.2.2 Applying Lubricant
6.2.3 Marking Application
6.2.4 Others
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Spray Valve Controller Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Spray Valve Controller Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Analysis and Forecast
9.1 Introduction
9.2 North America Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Market Size Forecast by Type
9.6.1 Manual
9.6.2 Automatic
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Market Size Forecast by Applications
9.10.1 Conformal Coating Application
9.10.2 Applying Lubricant
9.10.3 Marking Application
9.10.4 Others
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Analysis and Forecast
10.1 Introduction
10.2 Europe Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Market Size Forecast by Type
10.6.1 Manual
10.6.2 Automatic
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Market Size Forecast by Applications
10.10.1 Conformal Coating Application
10.10.2 Applying Lubricant
10.10.3 Marking Application
10.10.4 Others
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Market Size Forecast by Type
11.6.1 Manual
11.6.2 Automatic
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Market Size Forecast by Applications
11.10.1 Conformal Coating Application
11.10.2 Applying Lubricant
11.10.3 Marking Application
11.10.4 Others
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Analysis and Forecast
12.1 Introduction
12.2 Latin America Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Market Size Forecast by Type
12.6.1 Manual
12.6.2 Automatic
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Market Size Forecast by Applications
12.10.1 Conformal Coating Application
12.10.2 Applying Lubricant
12.10.3 Marking Application
12.10.4 Others
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Market Size Forecast by Type
13.6.1 Manual
13.6.2 Automatic
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Market Size Forecast by Applications
13.10.1 Conformal Coating Application
13.10.2 Applying Lubricant
13.10.3 Marking Application
13.10.4 Others
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Spray Valve Controller Market: Competitive Dashboard
14.2 Global Spray Valve Controller Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 Techcon
14.3.2 Nordson
14.3.3 Fisnar
14.3.4 TIR
14.3.5 SAN-EI TECH
14.3.6 Musashi
14.3.7 TeeJet
14.3.8 Loctite
14.3.9 Adhesive Dispensing Limited
