Market Overview:
The global suspension PTFE market is expected to grow at a CAGR of 5.5% during the forecast period from 2018 to 2030. The growth in the market can be attributed to the increasing demand for PTFE in various applications, such as industrial plastics, inks, paints, lubricants & grease, and others.
Product Definition:
A suspension is a mixture of two or more substances in which one substance (the dispersed phase) is present in particles that are suspended throughout the other substance (the dispersion medium). Suspension PTFE is a type of suspension that consists of tiny particles of PTFE dispersed in a liquid. It has several important uses, including as an additive to improve the properties of plastics, coatings, and sealants; as a lubricant; and as an ingredient in some types of paints.
Average Particle Size
The global suspension PTFE market size was valued at USD 1.8 billion in 2016 and is expected to grow at a CAGR of XX% over the forecast period. The growth can be attributed to increasing demand from various end-use industries such as automotive, aerospace & defense, consumer goods, and construction among others.
Average Particle Size 10-30 um:
The global average particle size (AS) of PTFE is 10-30 um. It has been observed that the smaller the particle size, the better is its flowability and flexibility.
Application Insights:
The industrial plastics segment held the largest market share in 2017 and is projected to expand further at a steady CAGR during the forecast period. The growth can be attributed to increasing demand for plastic products in various industries, such as automotive, construction and packaging. PTFE based paints are used as a coating material for railway vehicles, containers and pallets in the logistics industry. This has resulted in an increased product consumption across several applications areas of industrial significance over the recent past.
Regional Analysis:
Asia Pacific dominated the global market in 2017 and is expected to continue its dominance over the forecast period. The growth of this region can be attributed to rising product demand from various application industries. In addition, increasing foreign investments coupled with favorable government policies are anticipated to drive industry expansion over the next eight years.
The Asia Pacific was followed by Europe, which accounted for a share of more than 20% in terms of revenue in 2017 owing to high demand from several major application industries including paints & coatings, industrial plastics and lubricants & greases. The presence of major manufacturers along with huge production capacity has resulted in low prices for end-users across Europe; hence promoting product consumption across other regions as well including North America and Central & South America etcetera.
Growth Factors:
- Increasing demand from the automotive and aerospace industries for high-performance suspension systems is expected to drive the growth of the suspension PTFE market.
- Rising demand for lightweight and fuel-efficient vehicles is also projected to boost the demand for suspension PTFE in the coming years.
- Growing popularity of electric vehicles is also anticipated to create new opportunities for the growth of this market in near future.
- Stringent emission norms by regulatory authorities are compelling automobile manufacturers to adopt advanced technologies, such as suspensions made from PTFE, which will propel market growth over next few years .
Scope Of The Report
Report Attributes
Report Details
Report Title
Suspension PTFE Market Research Report
By Type
Average Particle Size <10 um, Average Particle Size 10-30 um, Average Particle Size 40~90 um, Average Particle Size 90-120 um, Average Particle Size 120~180 um, Average Particle Size >180 um
By Application
Industrial Plastics, Inks, Painting, Lubricants & Grease, Others
By Companies
Hubei Everflon Polymer, Solvay, Daikin, Shamrock Technologies, 3M, Chemours, Micro Powder (MPI), AGC, Gujarat Fluorochemicals, Dongyue Group, Hubei Everflon Polymer
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
142
Number of Tables & Figures
100
Customization Available
Yes, the report can be customized as per your need.
Global Suspension PTFE Market Report Segments:
The global Suspension PTFE market is segmented on the basis of:
Types
Average Particle Size <10 um, Average Particle Size 10-30 um, Average Particle Size 40~90 um, Average Particle Size 90-120 um, Average Particle Size 120~180 um, Average Particle Size >180 um
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Industrial Plastics, Inks, Painting, Lubricants & Grease, Others
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- Hubei Everflon Polymer
- Solvay
- Daikin
- Shamrock Technologies
- 3M
- Chemours
- Micro Powder (MPI)
- AGC
- Gujarat Fluorochemicals
- Dongyue Group
- Hubei Everflon Polymer
Highlights of The Suspension PTFE Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- Average Particle Size <10 um
- Average Particle Size 10-30 um
- Average Particle Size 40~90 um
- Average Particle Size 90-120 um
- Average Particle Size 120~180 um
- Average Particle Size >180 um
- By Application:
- Industrial Plastics
- Inks
- Painting
- Lubricants & Grease
- Others
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Suspension PTFE Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
Suspension PTFE is a type of polymer that is used in many types of products. It is often used as a coating on things like pipes and tubes. Suspension PTFE can also be found in products like cookware and oven mitts.
Some of the major players in the suspension ptfe market are Hubei Everflon Polymer, Solvay, Daikin, Shamrock Technologies, 3M, Chemours, Micro Powder (MPI), AGC, Gujarat Fluorochemicals, Dongyue Group, Hubei Everflon Polymer.
The suspension ptfe market is expected to grow at a compound annual growth rate of 5.5%.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Suspension PTFE Market Overview 4.1 Introduction 4.1.1 Market Taxonomy 4.1.2 Market Definition 4.1.3 Macro-Economic Factors Impacting the Market Growth 4.2 Suspension PTFE Market Dynamics 4.2.1 Market Drivers 4.2.2 Market Restraints 4.2.3 Market Opportunity 4.3 Suspension PTFE Market - Supply Chain Analysis 4.3.1 List of Key Suppliers 4.3.2 List of Key Distributors 4.3.3 List of Key Consumers 4.4 Key Forces Shaping the Suspension PTFE Market 4.4.1 Bargaining Power of Suppliers 4.4.2 Bargaining Power of Buyers 4.4.3 Threat of Substitution 4.4.4 Threat of New Entrants 4.4.5 Competitive Rivalry 4.5 Global Suspension PTFE Market Size & Forecast, 2018-2028 4.5.1 Suspension PTFE Market Size and Y-o-Y Growth 4.5.2 Suspension PTFE Market Absolute $ Opportunity
Chapter 5 Global Suspension PTFE Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Suspension PTFE Market Size Forecast by Type
5.2.1 Average Particle Size <10 um
5.2.2 Average Particle Size 10-30 um
5.2.3 Average Particle Size 40~90 um
5.2.4 Average Particle Size 90-120 um
5.2.5 Average Particle Size 120~180 um
5.2.6 Average Particle Size >180 um
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Suspension PTFE Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Suspension PTFE Market Size Forecast by Applications
6.2.1 Industrial Plastics
6.2.2 Inks
6.2.3 Painting
6.2.4 Lubricants & Grease
6.2.5 Others
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Suspension PTFE Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Suspension PTFE Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Suspension PTFE Analysis and Forecast
9.1 Introduction
9.2 North America Suspension PTFE Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Suspension PTFE Market Size Forecast by Type
9.6.1 Average Particle Size <10 um
9.6.2 Average Particle Size 10-30 um
9.6.3 Average Particle Size 40~90 um
9.6.4 Average Particle Size 90-120 um
9.6.5 Average Particle Size 120~180 um
9.6.6 Average Particle Size >180 um
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Suspension PTFE Market Size Forecast by Applications
9.10.1 Industrial Plastics
9.10.2 Inks
9.10.3 Painting
9.10.4 Lubricants & Grease
9.10.5 Others
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Suspension PTFE Analysis and Forecast
10.1 Introduction
10.2 Europe Suspension PTFE Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Suspension PTFE Market Size Forecast by Type
10.6.1 Average Particle Size <10 um
10.6.2 Average Particle Size 10-30 um
10.6.3 Average Particle Size 40~90 um
10.6.4 Average Particle Size 90-120 um
10.6.5 Average Particle Size 120~180 um
10.6.6 Average Particle Size >180 um
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Suspension PTFE Market Size Forecast by Applications
10.10.1 Industrial Plastics
10.10.2 Inks
10.10.3 Painting
10.10.4 Lubricants & Grease
10.10.5 Others
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Suspension PTFE Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Suspension PTFE Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Suspension PTFE Market Size Forecast by Type
11.6.1 Average Particle Size <10 um
11.6.2 Average Particle Size 10-30 um
11.6.3 Average Particle Size 40~90 um
11.6.4 Average Particle Size 90-120 um
11.6.5 Average Particle Size 120~180 um
11.6.6 Average Particle Size >180 um
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Suspension PTFE Market Size Forecast by Applications
11.10.1 Industrial Plastics
11.10.2 Inks
11.10.3 Painting
11.10.4 Lubricants & Grease
11.10.5 Others
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Suspension PTFE Analysis and Forecast
12.1 Introduction
12.2 Latin America Suspension PTFE Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Suspension PTFE Market Size Forecast by Type
12.6.1 Average Particle Size <10 um
12.6.2 Average Particle Size 10-30 um
12.6.3 Average Particle Size 40~90 um
12.6.4 Average Particle Size 90-120 um
12.6.5 Average Particle Size 120~180 um
12.6.6 Average Particle Size >180 um
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Suspension PTFE Market Size Forecast by Applications
12.10.1 Industrial Plastics
12.10.2 Inks
12.10.3 Painting
12.10.4 Lubricants & Grease
12.10.5 Others
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Suspension PTFE Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Suspension PTFE Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Suspension PTFE Market Size Forecast by Type
13.6.1 Average Particle Size <10 um
13.6.2 Average Particle Size 10-30 um
13.6.3 Average Particle Size 40~90 um
13.6.4 Average Particle Size 90-120 um
13.6.5 Average Particle Size 120~180 um
13.6.6 Average Particle Size >180 um
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Suspension PTFE Market Size Forecast by Applications
13.10.1 Industrial Plastics
13.10.2 Inks
13.10.3 Painting
13.10.4 Lubricants & Grease
13.10.5 Others
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Suspension PTFE Market: Competitive Dashboard
14.2 Global Suspension PTFE Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 Hubei Everflon Polymer
14.3.2 Solvay
14.3.3 Daikin
14.3.4 Shamrock Technologies
14.3.5 3M
14.3.6 Chemours
14.3.7 Micro Powder (MPI)
14.3.8 AGC
14.3.9 Gujarat Fluorochemicals
14.3.10 Dongyue Group
14.3.11 Hubei Everflon Polymer