Market Overview:
The global toilet water tank fittings market is expected to grow at a CAGR of 5.5% during the forecast period from 2018 to 2030. The market growth can be attributed to the increasing demand for residential and commercial buildings, and rising awareness about hygiene and sanitation. Based on type, the global toilet water tank fittings market is segmented into fill valve, flush valve, push button & lever, and others. The fill valve segment is expected to hold the largest share of the global toilet water tank fittings market in 2018 owing to its high demand in residential applications. Based on application, the global toilet water tank fittings market is segmented into residential, hotel, commercial building, and other applications. The hotel segment is projected to grow at a higher CAGR than other segments during the forecast period due to an increase in tourism across different regions worldwide.
Product Definition:
A toilet water tank fitting is a device that is used to connect the water supply to a toilet. The fittings are typically made of brass and are threaded so that they can be attached to the corresponding pipes. They also have a rubber washer so that they create a tight seal and prevent leaks.
Fill Valve:
A fill valve is a device installed in the toilet water tank to regulate the flow of water into the bowl. The valve is usually attached to the tank’s plumbing or mounted on top of it. It works by closing an opening in a pipe when there is not enough water pressure for a flush, and opening it when necessary for efficient operation.
The global fill valve market size was valued at USD 1,37,848 in 2015.
Flush Valve:
Flush valve is a closed system that prevents the backflow of water. It works by reducing the pressure in the toilet tank and allows pressurized water to enter into the tank after being used for urination. The toilet flush valve plays an important role in maintaining hygiene and sanitation in public toilets or restrooms as it controls the spread of germs, bacteria, and other microorganisms which may cause disease.
Application Insights:
The residential application segment held the largest share of more than 60.0% in 2017. The rising number of urban population across the globe has led to an increased demand for residential toilets, which is likely to fuel product demand over the forecast period. In addition, rapid growth in residential construction across various regions coupled with increasing awareness regarding superior fittings and components are expected to drive market growth over the coming years.
Commercial building application is anticipated to be one of fastest growing segments owing to a large number of commercial construction projects around the world including new office buildings, shopping malls and hotels at a domestic level as well as at regional level such as China, India and Australia among others. Rapidly expanding hospitality sector especially in developing countries like India, Thailand Vietnam Indonesia Philippines Saudi Arabia etc.
Regional Analysis:
Asia Pacific dominated the global market in 2017 and is expected to continue its dominance over the forecast period. The region has a large number of commercial buildings, especially hotels and restaurants. This sector requires high maintenance of restrooms as well as toilet facilities for their customers. Moreover, with growing population in countries like India and China, there is an increasing requirement for more restrooms across these nations which will further boost product demand in near future.
North America was the second-largest regional market followed by Europe owing to presence of developed economies such as U.S., Canada, Germany etc., coupled with higher spending capacity of consumers on hygiene products due to increased disposable income after years of recession from 2008 to 2013 followed by economic depression from 2014 till present day across most European countries including Greece, Spain Portugal Italy etc.
Growth Factors:
- Increasing demand for water-efficient fittings and fixtures
- Rising awareness about the benefits of using toilet water tank fittings
- Growing popularity of eco-friendly and low-maintenance fittings and fixtures
- Proliferation of online retail platforms that offer a wide range of toilet water tank fittings at competitive prices
- Increasing number of construction projects in developing countries
Scope Of The Report
Report Attributes
Report Details
Report Title
Toilet Water Tank Fittings Market Research Report
By Type
Fill Valve, Flush Valve, Push Button & Lever, Others
By Application
Residential, Hotel, Commercial Building, Other
By Companies
Fluidmaster, WDI Plumbing, Geberit, R&T Plumbing, Yuyao Meige Sanitary Parts Industrial, BST, BQM, Siamp, Xiamen Alyn Plumbing, Meitu, Fluidmaster, Xiamen NAT Plumbing Inc, Foshan Kardier, Orient Ceramics, HTD Sanitary, Bestter
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
200
Number of Tables & Figures
140
Customization Available
Yes, the report can be customized as per your need.
Global Toilet Water Tank Fittings Market Report Segments:
The global Toilet Water Tank Fittings market is segmented on the basis of:
Types
Fill Valve, Flush Valve, Push Button & Lever, Others
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Residential, Hotel, Commercial Building, Other
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- Fluidmaster
- WDI Plumbing
- Geberit
- R&T Plumbing
- Yuyao Meige Sanitary Parts Industrial
- BST
- BQM
- Siamp
- Xiamen Alyn Plumbing
- Meitu
- Fluidmaster
- Xiamen NAT Plumbing Inc
- Foshan Kardier
- Orient Ceramics
- HTD Sanitary
- Bestter
Highlights of The Toilet Water Tank Fittings Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- Fill Valve
- Flush Valve
- Push Button & Lever
- Others
- By Application:
- Residential
- Hotel
- Commercial Building
- Other
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Toilet Water Tank Fittings Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
Toilet water tank fittings are the connections between the toilet and the water supply. They allow you to connect your toilet to a municipal or private water supply, and they can also be used to connect your toilet to a septic system.
Some of the major companies in the toilet water tank fittings market are Fluidmaster, WDI Plumbing, Geberit, R&T Plumbing, Yuyao Meige Sanitary Parts Industrial, BST, BQM, Siamp, Xiamen Alyn Plumbing, Meitu, Fluidmaster, Xiamen NAT Plumbing Inc, Foshan Kardier, Orient Ceramics, HTD Sanitary, Bestter.
The toilet water tank fittings market is expected to grow at a compound annual growth rate of 5.5%.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Toilet Water Tank Fittings Market Overview 4.1 Introduction 4.1.1 Market Taxonomy 4.1.2 Market Definition 4.1.3 Macro-Economic Factors Impacting the Market Growth 4.2 Toilet Water Tank Fittings Market Dynamics 4.2.1 Market Drivers 4.2.2 Market Restraints 4.2.3 Market Opportunity 4.3 Toilet Water Tank Fittings Market - Supply Chain Analysis 4.3.1 List of Key Suppliers 4.3.2 List of Key Distributors 4.3.3 List of Key Consumers 4.4 Key Forces Shaping the Toilet Water Tank Fittings Market 4.4.1 Bargaining Power of Suppliers 4.4.2 Bargaining Power of Buyers 4.4.3 Threat of Substitution 4.4.4 Threat of New Entrants 4.4.5 Competitive Rivalry 4.5 Global Toilet Water Tank Fittings Market Size & Forecast, 2018-2028 4.5.1 Toilet Water Tank Fittings Market Size and Y-o-Y Growth 4.5.2 Toilet Water Tank Fittings Market Absolute $ Opportunity
Chapter 5 Global Toilet Water Tank Fittings Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Toilet Water Tank Fittings Market Size Forecast by Type
5.2.1 Fill Valve
5.2.2 Flush Valve
5.2.3 Push Button & Lever
5.2.4 Others
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Toilet Water Tank Fittings Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Toilet Water Tank Fittings Market Size Forecast by Applications
6.2.1 Residential
6.2.2 Hotel
6.2.3 Commercial Building
6.2.4 Other
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Toilet Water Tank Fittings Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Toilet Water Tank Fittings Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Toilet Water Tank Fittings Analysis and Forecast
9.1 Introduction
9.2 North America Toilet Water Tank Fittings Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Toilet Water Tank Fittings Market Size Forecast by Type
9.6.1 Fill Valve
9.6.2 Flush Valve
9.6.3 Push Button & Lever
9.6.4 Others
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Toilet Water Tank Fittings Market Size Forecast by Applications
9.10.1 Residential
9.10.2 Hotel
9.10.3 Commercial Building
9.10.4 Other
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Toilet Water Tank Fittings Analysis and Forecast
10.1 Introduction
10.2 Europe Toilet Water Tank Fittings Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Toilet Water Tank Fittings Market Size Forecast by Type
10.6.1 Fill Valve
10.6.2 Flush Valve
10.6.3 Push Button & Lever
10.6.4 Others
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Toilet Water Tank Fittings Market Size Forecast by Applications
10.10.1 Residential
10.10.2 Hotel
10.10.3 Commercial Building
10.10.4 Other
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Toilet Water Tank Fittings Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Toilet Water Tank Fittings Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Toilet Water Tank Fittings Market Size Forecast by Type
11.6.1 Fill Valve
11.6.2 Flush Valve
11.6.3 Push Button & Lever
11.6.4 Others
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Toilet Water Tank Fittings Market Size Forecast by Applications
11.10.1 Residential
11.10.2 Hotel
11.10.3 Commercial Building
11.10.4 Other
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Toilet Water Tank Fittings Analysis and Forecast
12.1 Introduction
12.2 Latin America Toilet Water Tank Fittings Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Toilet Water Tank Fittings Market Size Forecast by Type
12.6.1 Fill Valve
12.6.2 Flush Valve
12.6.3 Push Button & Lever
12.6.4 Others
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Toilet Water Tank Fittings Market Size Forecast by Applications
12.10.1 Residential
12.10.2 Hotel
12.10.3 Commercial Building
12.10.4 Other
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Toilet Water Tank Fittings Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Toilet Water Tank Fittings Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Toilet Water Tank Fittings Market Size Forecast by Type
13.6.1 Fill Valve
13.6.2 Flush Valve
13.6.3 Push Button & Lever
13.6.4 Others
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Toilet Water Tank Fittings Market Size Forecast by Applications
13.10.1 Residential
13.10.2 Hotel
13.10.3 Commercial Building
13.10.4 Other
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Toilet Water Tank Fittings Market: Competitive Dashboard
14.2 Global Toilet Water Tank Fittings Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 Fluidmaster
14.3.2 WDI Plumbing
14.3.3 Geberit
14.3.4 R&T Plumbing
14.3.5 Yuyao Meige Sanitary Parts Industrial
14.3.6 BST
14.3.7 BQM
14.3.8 Siamp
14.3.9 Xiamen Alyn Plumbing
14.3.10 Meitu
14.3.11 Fluidmaster
14.3.12 Xiamen NAT Plumbing Inc
14.3.13 Foshan Kardier
14.3.14 Orient Ceramics
14.3.15 HTD Sanitary
14.3.16 Bestter