Market Overview:
The global ultrahigh vacuum (UHV) pumps market is expected to grow at a CAGR of 5.8% from 2018 to 2030. The growth in the market can be attributed to the increasing demand for UHV pumps in various applications such as electronics & semiconductor, pharmaceuticals & chemicals, industrial and manufacturing, and other applications. Additionally, the growing demand for miniaturization of electronic devices is also fueling the growth of the global UHV pumps market. On the basis of type, ion getter pumps (IGPs) are expected to hold a major share of the global UHV pump market during the forecast period. This can be attributed to their high efficiency and low cost as compared to other types of UHV pumps.
Product Definition:
An ultrahigh vacuum pump is a device used to produce an ultrahigh vacuum environment. These pumps are typically used in research and development settings, as well as in the manufacturing of semiconductor devices and other sensitive equipment. Ultrahigh vacuum pumps are important because they create an environment that is free of contaminants, which can interfere with the operation of sensitive equipment.
Ion Getter Pumps (IGPs):
Ion getter pumps are used in UHV (Ultrahigh Vacuum) to remove the contamination from high-vacuum systems. The mechanism of action is based on the interaction between positive and negative ions produced by an ionization source. These ions interact with contaminants present in the system, thereby removing them from the equipment surface.
Titanium Sublimator Pumps (TSPs):
Titanium sublimator pumps (TSPs) are used in ultrahigh vacuum pumps. The working principle of these devices is based on the vaporization of liquid by heating it to its boiling point. These devices are mainly used for pumping air or gas at high vacuum levels and hence, they require titanium as a material for heat transfer process.
The global market size was valued at USD 1,Bn in 2015.
Application Insights:
Ultrahigh vacuum pumps are used in a wide range of applications including electronics & semiconductor, pharmaceutical & chemical, industrial and manufacturing, and other. Electronics & semiconductor emerged as the largest application segment owing to its use in various processes such as chip packaging, clean room equipment cleaning/desalination systems among others. The ultrahigh vacuum technology is also being increasingly utilized for research purposes within the electronics industry.
The growing demand for UHV pumps from emerging economies such as China and India is expected to drive growth over the forecast period. In addition, increasing R&D investments by major players such as IBM Corporation., Samsung Electronics Co., Ltd., Panasonic Corporation., Hitachi Ltd., Infineon Technologies AG among others will further boost market growth over the coming years.
Regional Analysis:
North America dominated the global market in 2017. The growth of this region can be attributed to the presence of a large number of UHV pump manufacturers and research institutes in the U.S. Furthermore, increasing R&D activities for developing new products is expected to fuel regional product demand over the forecast period.
Asia Pacific is anticipated to witness significant growth over the next eight years owing to rapid industrialization and growing economies such as China, India, Japan, South Korea & Taiwan that are major consumers of vacuum equipment & systems across industries including manufacturing, automotive/transportation and electronics/computers among others.
Growth Factors:
- Increasing demand for semiconductor and flat panel displays
- Growing number of vacuum deposition and etching processes in the fabrication of semiconductor devices
- Rising demand for nanotechnology-based products
- Proliferation of UHV research facilities across the globe
- Technological advancements in UHV pumps
Scope Of The Report
Report Attributes
Report Details
Report Title
Ultrahigh Vacuum (UHV) Pumps Market Research Report
By Type
Ion Getter Pumps (IGPs), Titanium Sublimator Pumps (TSPs), Non-evaporable Getters (NEG) Pumps
By Application
Electronics & Semiconductor, Pharmaceutical & Chemical, Industrial and Manufacturing, Other
By Companies
Edwards Vacuum, Riber, ULVAC, Leybold, Saes Group, Agilent, SKY Technology Development, VACOM, Gamma Vacuum, Atlas Technologies, Frako-Term
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
188
Number of Tables & Figures
132
Customization Available
Yes, the report can be customized as per your need.
Global Ultrahigh Vacuum (UHV) Pumps Market Report Segments:
The global Ultrahigh Vacuum (UHV) Pumps market is segmented on the basis of:
Types
Ion Getter Pumps (IGPs), Titanium Sublimator Pumps (TSPs), Non-evaporable Getters (NEG) Pumps
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Electronics & Semiconductor, Pharmaceutical & Chemical, Industrial and Manufacturing, Other
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- Edwards Vacuum
- Riber
- ULVAC
- Leybold
- Saes Group
- Agilent
- SKY Technology Development
- VACOM
- Gamma Vacuum
- Atlas Technologies
- Frako-Term
Highlights of The Ultrahigh Vacuum (UHV) Pumps Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- Ion Getter Pumps (IGPs)
- Titanium Sublimator Pumps (TSPs)
- Non-evaporable Getters (NEG) Pumps
- By Application:
- Electronics & Semiconductor
- Pharmaceutical & Chemical
- Industrial and Manufacturing
- Other
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Ultrahigh Vacuum (UHV) Pumps Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
Ultrahigh vacuum pumps are used to evacuate gases and liquids at extremely high pressures. They are also used in research and development of new technologies.
Some of the major companies in the ultrahigh vacuum (uhv) pumps market are Edwards Vacuum, Riber, ULVAC, Leybold, Saes Group, Agilent, SKY Technology Development, VACOM, Gamma Vacuum, Atlas Technologies, Frako-Term.
The ultrahigh vacuum (uhv) pumps market is expected to grow at a compound annual growth rate of 5.8%.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Ultrahigh Vacuum (UHV) Pumps Market Overview 4.1 Introduction 4.1.1 Market Taxonomy 4.1.2 Market Definition 4.1.3 Macro-Economic Factors Impacting the Market Growth 4.2 Ultrahigh Vacuum (UHV) Pumps Market Dynamics 4.2.1 Market Drivers 4.2.2 Market Restraints 4.2.3 Market Opportunity 4.3 Ultrahigh Vacuum (UHV) Pumps Market - Supply Chain Analysis 4.3.1 List of Key Suppliers 4.3.2 List of Key Distributors 4.3.3 List of Key Consumers 4.4 Key Forces Shaping the Ultrahigh Vacuum (UHV) Pumps Market 4.4.1 Bargaining Power of Suppliers 4.4.2 Bargaining Power of Buyers 4.4.3 Threat of Substitution 4.4.4 Threat of New Entrants 4.4.5 Competitive Rivalry 4.5 Global Ultrahigh Vacuum (UHV) Pumps Market Size & Forecast, 2020-2028 4.5.1 Ultrahigh Vacuum (UHV) Pumps Market Size and Y-o-Y Growth 4.5.2 Ultrahigh Vacuum (UHV) Pumps Market Absolute $ Opportunity
Chapter 5 Global Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Market Size Forecast by Type
5.2.1 Ion Getter Pumps (IGPs)
5.2.2 Titanium Sublimator Pumps (TSPs)
5.2.3 Non-evaporable Getters (NEG) Pumps
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Market Size Forecast by Applications
6.2.1 Electronics & Semiconductor
6.2.2 Pharmaceutical & Chemical
6.2.3 Industrial and Manufacturing
6.2.4 Other
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Ultrahigh Vacuum (UHV) Pumps Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Ultrahigh Vacuum (UHV) Pumps Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Analysis and Forecast
9.1 Introduction
9.2 North America Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Market Size Forecast by Type
9.6.1 Ion Getter Pumps (IGPs)
9.6.2 Titanium Sublimator Pumps (TSPs)
9.6.3 Non-evaporable Getters (NEG) Pumps
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Market Size Forecast by Applications
9.10.1 Electronics & Semiconductor
9.10.2 Pharmaceutical & Chemical
9.10.3 Industrial and Manufacturing
9.10.4 Other
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Analysis and Forecast
10.1 Introduction
10.2 Europe Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Market Size Forecast by Type
10.6.1 Ion Getter Pumps (IGPs)
10.6.2 Titanium Sublimator Pumps (TSPs)
10.6.3 Non-evaporable Getters (NEG) Pumps
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Market Size Forecast by Applications
10.10.1 Electronics & Semiconductor
10.10.2 Pharmaceutical & Chemical
10.10.3 Industrial and Manufacturing
10.10.4 Other
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Market Size Forecast by Type
11.6.1 Ion Getter Pumps (IGPs)
11.6.2 Titanium Sublimator Pumps (TSPs)
11.6.3 Non-evaporable Getters (NEG) Pumps
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Market Size Forecast by Applications
11.10.1 Electronics & Semiconductor
11.10.2 Pharmaceutical & Chemical
11.10.3 Industrial and Manufacturing
11.10.4 Other
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Analysis and Forecast
12.1 Introduction
12.2 Latin America Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Market Size Forecast by Type
12.6.1 Ion Getter Pumps (IGPs)
12.6.2 Titanium Sublimator Pumps (TSPs)
12.6.3 Non-evaporable Getters (NEG) Pumps
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Market Size Forecast by Applications
12.10.1 Electronics & Semiconductor
12.10.2 Pharmaceutical & Chemical
12.10.3 Industrial and Manufacturing
12.10.4 Other
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Market Size Forecast by Type
13.6.1 Ion Getter Pumps (IGPs)
13.6.2 Titanium Sublimator Pumps (TSPs)
13.6.3 Non-evaporable Getters (NEG) Pumps
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Market Size Forecast by Applications
13.10.1 Electronics & Semiconductor
13.10.2 Pharmaceutical & Chemical
13.10.3 Industrial and Manufacturing
13.10.4 Other
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Ultrahigh Vacuum (UHV) Pumps Market: Competitive Dashboard
14.2 Global Ultrahigh Vacuum (UHV) Pumps Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 Edwards Vacuum
14.3.2 Riber
14.3.3 ULVAC
14.3.4 Leybold
14.3.5 Saes Group
14.3.6 Agilent
14.3.7 SKY Technology Development
14.3.8 VACOM
14.3.9 Gamma Vacuum
14.3.10 Atlas Technologies
14.3.11 Frako-Term