Market Overview:
The global vehicle fuel injector market is expected to grow at a CAGR of 5.5% from 2018 to 2030. The growth in the market can be attributed to the increasing demand for vehicles and rising awareness about fuel-efficient vehicles. Additionally, the growing demand for diesel-powered passenger cars is also propelling the growth of the global vehicle fuel injector market. The gasoline direct injection (GDI) segment is projected to grow at a higher CAGR than other segments during the forecast period.
Product Definition:
A fuel injector is a valve that delivers fuel to a combustion engine. It has to deliver the correct amount of fuel per cycle, and at the correct time.
Gasoline Direct Injection (GDI):
Gasoline direct injection (GDI) is an engine technology that allows gasoline to be injected directly into the combustion chamber. The technique has been around for nearly two decades but has only recently gained widespread acceptance due to its ability to deliver better fuel efficiency and power with reduced emissions.
The global vehicle fuel injector market was valued at USD 6.5 billion in 2013.
Port Fuel Injectors (PFI):
The injectors are used to deliver the proper amount of fuel at every cylinder in order to maintain optimum air-fuel ratio. They work on the principle of physical movement and valves that open under pressure, allowing a precise amount of fuel into each cylinder.
PFI is an electronic device which controls and monitors all the injectors through a common rail system.
Application Insights:
Gasoline automotive application dominated the global vehicle fuel injector market in 2017, accounting for over 60.0% share of the overall revenue. The segment is expected to continue its dominance over the forecast period owing to increasing sales of gasoline-powered vehicles in countries such as U.S., China, India and Brazil among others which are estimated to contribute significantly towards industry growth during the study period.
The diesel automobile application segment is also projected to witness significant growth during the same period owing to rising demand for high efficiency engines that offer improved performance while reducing emissions and fuel consumption on a per unit basis which is likely drive industry expansion over next seven years particularly across developing regions such as Asia Pacific and Latin America where low cost labor has been a major factor contributing towards higher penetration rates of diesel automobiles compared with GDI equipped vehicles thus far.
Regional Analysis:
Asia Pacific is expected to be the fastest-growing region over the forecast period. The growth can be attributed to increasing automobile production in countries, such as China and India. In 2017, Asia Pacific accounted for 29% of global vehicle production and is projected to grow at a CAGR of XX% from 2018 to 2030. Furthermore, favorable government regulations are anticipated to propel market growth over the coming years.
Latin America also presents significant opportunities for industry participants owing high demand for fuel-efficient vehicles coupled with stringent government policies regarding carbon emissions and fuel economy performance standards set by U.S.
Growth Factors:
- Increasing demand for fuel-efficient vehicles
- Stringent emission norms by regulatory authorities
- Rising demand for passenger cars and commercial vehicles
- Development of advanced fuel injection technologies
- Growing popularity of diesel engines
Scope Of The Report
Report Attributes
Report Details
Report Title
Vehicle Fuel Injector Market Research Report
By Type
Gasoline Direct Injection (GDI), Port Fuel Injectors (PFI), Diesel Fuel Injectors
By Application
Gasoline Automotive, Diesel Automotive
By Companies
Bosch, Continental, Delphi Technologies, Denso, Eaton, Hyundai KEFICO, Stanadyne Holdings, SMP OE, Infineon Technologies, Keihin, STMicroelectronics
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
247
Number of Tables & Figures
173
Customization Available
Yes, the report can be customized as per your need.
Global Vehicle Fuel Injector Market Report Segments:
The global Vehicle Fuel Injector market is segmented on the basis of:
Types
Gasoline Direct Injection (GDI), Port Fuel Injectors (PFI), Diesel Fuel Injectors
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Gasoline Automotive, Diesel Automotive
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- Bosch
- Continental
- Delphi Technologies
- Denso
- Eaton
- Hyundai KEFICO
- Stanadyne Holdings
- SMP OE
- Infineon Technologies
- Keihin
- STMicroelectronics
Highlights of The Vehicle Fuel Injector Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- Gasoline Direct Injection (GDI)
- Port Fuel Injectors (PFI)
- Diesel Fuel Injectors
- By Application:
- Gasoline Automotive
- Diesel Automotive
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Vehicle Fuel Injector Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
A vehicle fuel injector is a device that helps the engine to properly mix air and fuel.
Some of the major companies in the vehicle fuel injector market are Bosch, Continental, Delphi Technologies, Denso, Eaton, Hyundai KEFICO, Stanadyne Holdings, SMP OE, Infineon Technologies, Keihin, STMicroelectronics.
The vehicle fuel injector market is expected to grow at a compound annual growth rate of 5.5%.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Vehicle Fuel Injector Market Overview
4.1 Introduction
4.1.1 Market Taxonomy
4.1.2 Market Definition
4.1.3 Macro-Economic Factors Impacting the Market Growth
4.2 Vehicle Fuel Injector Market Dynamics
4.2.1 Market Drivers
4.2.2 Market Restraints
4.2.3 Market Opportunity
4.3 Vehicle Fuel Injector Market - Supply Chain Analysis
4.3.1 List of Key Suppliers
4.3.2 List of Key Distributors
4.3.3 List of Key Consumers
4.4 Key Forces Shaping the Vehicle Fuel Injector Market
4.4.1 Bargaining Power of Suppliers
4.4.2 Bargaining Power of Buyers
4.4.3 Threat of Substitution
4.4.4 Threat of New Entrants
4.4.5 Competitive Rivalry
4.5 Global Vehicle Fuel Injector Market Size & Forecast, 2018-2028
4.5.1 Vehicle Fuel Injector Market Size and Y-o-Y Growth
4.5.2 Vehicle Fuel Injector Market Absolute $ Opportunity
Chapter 5 Global Vehicle Fuel Injector Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Vehicle Fuel Injector Market Size Forecast by Type
5.2.1 Gasoline Direct Injection (GDI)
5.2.2 Port Fuel Injectors (PFI)
5.2.3 Diesel Fuel Injectors
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Vehicle Fuel Injector Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Vehicle Fuel Injector Market Size Forecast by Applications
6.2.1 Gasoline Automotive
6.2.2 Diesel Automotive
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Vehicle Fuel Injector Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Vehicle Fuel Injector Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Vehicle Fuel Injector Analysis and Forecast
9.1 Introduction
9.2 North America Vehicle Fuel Injector Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Vehicle Fuel Injector Market Size Forecast by Type
9.6.1 Gasoline Direct Injection (GDI)
9.6.2 Port Fuel Injectors (PFI)
9.6.3 Diesel Fuel Injectors
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Vehicle Fuel Injector Market Size Forecast by Applications
9.10.1 Gasoline Automotive
9.10.2 Diesel Automotive
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Vehicle Fuel Injector Analysis and Forecast
10.1 Introduction
10.2 Europe Vehicle Fuel Injector Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Vehicle Fuel Injector Market Size Forecast by Type
10.6.1 Gasoline Direct Injection (GDI)
10.6.2 Port Fuel Injectors (PFI)
10.6.3 Diesel Fuel Injectors
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Vehicle Fuel Injector Market Size Forecast by Applications
10.10.1 Gasoline Automotive
10.10.2 Diesel Automotive
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Vehicle Fuel Injector Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Vehicle Fuel Injector Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Vehicle Fuel Injector Market Size Forecast by Type
11.6.1 Gasoline Direct Injection (GDI)
11.6.2 Port Fuel Injectors (PFI)
11.6.3 Diesel Fuel Injectors
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Vehicle Fuel Injector Market Size Forecast by Applications
11.10.1 Gasoline Automotive
11.10.2 Diesel Automotive
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Vehicle Fuel Injector Analysis and Forecast
12.1 Introduction
12.2 Latin America Vehicle Fuel Injector Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Vehicle Fuel Injector Market Size Forecast by Type
12.6.1 Gasoline Direct Injection (GDI)
12.6.2 Port Fuel Injectors (PFI)
12.6.3 Diesel Fuel Injectors
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Vehicle Fuel Injector Market Size Forecast by Applications
12.10.1 Gasoline Automotive
12.10.2 Diesel Automotive
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Vehicle Fuel Injector Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Vehicle Fuel Injector Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Vehicle Fuel Injector Market Size Forecast by Type
13.6.1 Gasoline Direct Injection (GDI)
13.6.2 Port Fuel Injectors (PFI)
13.6.3 Diesel Fuel Injectors
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Vehicle Fuel Injector Market Size Forecast by Applications
13.10.1 Gasoline Automotive
13.10.2 Diesel Automotive
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Vehicle Fuel Injector Market: Competitive Dashboard
14.2 Global Vehicle Fuel Injector Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 Bosch
14.3.2 Continental
14.3.3 Delphi Technologies
14.3.4 Denso
14.3.5 Eaton
14.3.6 Hyundai KEFICO
14.3.7 Stanadyne Holdings
14.3.8 SMP OE
14.3.9 Infineon Technologies
14.3.10 Keihin
14.3.11 STMicroelectronics
