Market Overview:
The global wafer texturing equipment market is expected to grow at a CAGR of 6.5% during the forecast period from 2018 to 2030. The growth in this market can be attributed to the increasing demand for solar energy across the globe and the growing construction industry. In terms of type, acid texturing equipment is expected to hold a larger share of the global wafer texturing equipment market during the forecast period. This can be attributed to its low cost and high efficiency as compared to alkaline texturing equipment. In terms of application, photovoltaic industry is expected to hold a larger share of the global wafer texturing equipment market during the forecast period.
Product Definition:
Wafer texturing equipment is a type of manufacturing equipment used to texture the surface of semiconductor wafers. The purpose of texturing is to create a surface that will allow for good adhesion between the wafer and the coating material that is applied in subsequent processing steps. Without texturing, coatings can peel or flake off, leading to defects in the finished product.
Acid Texturing Equipment:
Texturing equipment is used to add a three-dimensional micro texture or macro texturing to the surface of a wafer. The primary function of acid texturing equipment is to add an acidic micro-topography on the wafers, which helps in increasing the adhesion between particles and increases their ability for self-cleaning.
Acid texturing uses sulfuric acid as a medium along with water and ethanol as cleaning agents.
Alkaline Texturing Equipment:
Alkaline texturing equipment is used to add a protective layer of oxide during the wafer processing. The alkaline process has gained significant traction in the industry owing to its ability to provide higher yield, improved performance and reliability, and lower cost compared with other processes such as phosphorous or titanium nitride.
Application Insights:
The photovoltaic industry accounted for the largest market share in 2017 and is projected to expand at a CAGR of XX% from 2018 to 2030. The growth can be attributed to increasing demand for solar energy across the globe. Rapidly growing demand for clean energy, coupled with government support & initiatives towards promoting installation of photovoltaic systems is expected to drive segment growth over the forecast period.
The construction industry was one of the prominent applications in 2017 and accounted for a significant share owing to rising investments by various governments in infrastructure development projects across various regions globally.
Regional Analysis:
Asia Pacific region dominated the global market in 2017 and is expected to continue its dominance over the forecast period. The growth of this region can be attributed to increasing solar panel installations in China, India, South Korea, Japan and Indonesia. In addition, rising demand for electronic devices such as smartphones and laptops is anticipated to propel industry expansion over the next eight years.
The Latin American regional market accounted for a significant share owing to growing investments by multinational companies in this region. For instance; In January 2018; LG Electronics Inc., announced plans of investing USD X billion by 2021 on Semiconductor Equipment Manufacturing (SEM) operations in Latin America which includes manufacturing of semiconductors using advanced equipment including wafer texturing machines.
Europe was estimated at USD X million in 2017 owing with high production volume across several application sectors such as photovoltaic industry.
Growth Factors:
- Increasing demand for semiconductor devices
- Growing number of applications for semiconductor devices
- Rising demand from the automotive sector
- Increasing demand from the consumer electronics sector
- Growing investments in research and development
Scope Of The Report
Report Attributes
Report Details
Report Title
Wafer Texturing Equipment Market Research Report
By Type
Acid Texturing Equipment, Alkaline Texturing Equipment
By Application
Photovoltaic Industry, Construction Industry
By Companies
KENMEC, S.C New Energy Technology, Yingkou Jinchen Technology, ECI, IPG Photonics, Jonas & Redmann, Jusung Engineering, Meyer Burger, MicroTech, Nines PV, RCT Soluction, RENA, Schmid, Singulus Technologies, Wonik IPS
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
204
Number of Tables & Figures
143
Customization Available
Yes, the report can be customized as per your need.
Global Wafer Texturing Equipment Market Report Segments:
The global Wafer Texturing Equipment market is segmented on the basis of:
Types
Acid Texturing Equipment, Alkaline Texturing Equipment
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Photovoltaic Industry, Construction Industry
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- KENMEC
- S.C New Energy Technology
- Yingkou Jinchen Technology
- ECI
- IPG Photonics
- Jonas & Redmann
- Jusung Engineering
- Meyer Burger
- MicroTech
- Nines PV
- RCT Soluction
- RENA
- Schmid
- Singulus Technologies
- Wonik IPS
Highlights of The Wafer Texturing Equipment Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- Acid Texturing Equipment
- Alkaline Texturing Equipment
- By Application:
- Photovoltaic Industry
- Construction Industry
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Wafer Texturing Equipment Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
Wafer texturing equipment is used to create textures on semiconductor wafers. The equipment uses a series of rotating drums or plates that can be filled with different materials, such as sand, glass beads, or plastic pellets. The material is then spun around the drum or plate at high speeds, and the texture is created by the collisions between the particles.
Some of the key players operating in the wafer texturing equipment market are KENMEC, S.C New Energy Technology, Yingkou Jinchen Technology, ECI, IPG Photonics, Jonas & Redmann, Jusung Engineering, Meyer Burger, MicroTech, Nines PV, RCT Soluction, RENA, Schmid, Singulus Technologies, Wonik IPS.
The wafer texturing equipment market is expected to register a CAGR of 6.5%.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Wafer Texturing Equipment Market Overview 4.1 Introduction 4.1.1 Market Taxonomy 4.1.2 Market Definition 4.1.3 Macro-Economic Factors Impacting the Market Growth 4.2 Wafer Texturing Equipment Market Dynamics 4.2.1 Market Drivers 4.2.2 Market Restraints 4.2.3 Market Opportunity 4.3 Wafer Texturing Equipment Market - Supply Chain Analysis 4.3.1 List of Key Suppliers 4.3.2 List of Key Distributors 4.3.3 List of Key Consumers 4.4 Key Forces Shaping the Wafer Texturing Equipment Market 4.4.1 Bargaining Power of Suppliers 4.4.2 Bargaining Power of Buyers 4.4.3 Threat of Substitution 4.4.4 Threat of New Entrants 4.4.5 Competitive Rivalry 4.5 Global Wafer Texturing Equipment Market Size & Forecast, 2020-2028 4.5.1 Wafer Texturing Equipment Market Size and Y-o-Y Growth 4.5.2 Wafer Texturing Equipment Market Absolute $ Opportunity
Chapter 5 Global Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Market Size Forecast by Type
5.2.1 Acid Texturing Equipment
5.2.2 Alkaline Texturing Equipment
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Market Size Forecast by Applications
6.2.1 Photovoltaic Industry
6.2.2 Construction Industry
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Wafer Texturing Equipment Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Wafer Texturing Equipment Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Analysis and Forecast
9.1 Introduction
9.2 North America Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Market Size Forecast by Type
9.6.1 Acid Texturing Equipment
9.6.2 Alkaline Texturing Equipment
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Market Size Forecast by Applications
9.10.1 Photovoltaic Industry
9.10.2 Construction Industry
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Analysis and Forecast
10.1 Introduction
10.2 Europe Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Market Size Forecast by Type
10.6.1 Acid Texturing Equipment
10.6.2 Alkaline Texturing Equipment
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Market Size Forecast by Applications
10.10.1 Photovoltaic Industry
10.10.2 Construction Industry
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Market Size Forecast by Type
11.6.1 Acid Texturing Equipment
11.6.2 Alkaline Texturing Equipment
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Market Size Forecast by Applications
11.10.1 Photovoltaic Industry
11.10.2 Construction Industry
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Analysis and Forecast
12.1 Introduction
12.2 Latin America Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Market Size Forecast by Type
12.6.1 Acid Texturing Equipment
12.6.2 Alkaline Texturing Equipment
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Market Size Forecast by Applications
12.10.1 Photovoltaic Industry
12.10.2 Construction Industry
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Market Size Forecast by Type
13.6.1 Acid Texturing Equipment
13.6.2 Alkaline Texturing Equipment
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Market Size Forecast by Applications
13.10.1 Photovoltaic Industry
13.10.2 Construction Industry
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Wafer Texturing Equipment Market: Competitive Dashboard
14.2 Global Wafer Texturing Equipment Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 KENMEC
14.3.2 S.C New Energy Technology
14.3.3 Yingkou Jinchen Technology
14.3.4 ECI
14.3.5 IPG Photonics
14.3.6 Jonas & Redmann
14.3.7 Jusung Engineering
14.3.8 Meyer Burger
14.3.9 MicroTech
14.3.10 Nines PV
14.3.11 RCT Soluction
14.3.12 RENA
14.3.13 Schmid
14.3.14 Singulus Technologies
14.3.15 Wonik IPS