Market Overview:
The global waterproof connectors market is expected to grow at a CAGR of 5.5% from 2018 to 2030. The growth in the market can be attributed to the increasing demand for waterproof connectors in various applications, such as wireless telecom antennas, radio equipment, tactical radios, outdoor sensors and others. Panel sealed waterproof connectors are expected to hold the largest share of the global waterproof connectors market by type during the forecast period. Asia Pacific is expected to be the fastest-growing region in terms of revenue during the forecast period.
Product Definition:
Waterproof connectors are connectors that have been designed to keep out water and other liquids. This is important because it helps protect the electronic components inside the connector from being damaged by liquid exposure.
Panel Sealed Waterproof Connectors:
By product type, Panel Sealed Waterproof Connectors (PSWCC) market is segmented into male and female. By application, it's used in industries such as oil & gas, chemical processing industry and marine industry. The growth factor of the market is increasing demand for waterproof connectors due to their use in applications that require a high level of reliability and performance.
Totally Sealed Waterproof Connectors:
Totally Sealed Waterproof Connectors are used in waterproof connectors market. It is a type of weather-resistant seal that is made up of plastic and rubber. The Totally Sealed waterproof connector has an internal gasket that prevents water from getting into the female threads at the time of installation or while it is being installed.
Application Insights:
The others segment includes the watertight connectors used in the oil & gas, power generation and civil construction industries. The demand for these products is expected to increase with the growing use of wireless telecom antennas, radio equipment and outdoor sensors. Waterproof connectors are widely used in wireless telecom applications as they prevent moisture from entering into the device or affecting its performance.
Waterproof connectors find application in various types of radio equipment including base stations, repeaters, mobile switching centers (MSC), etc., which are required to operate under water depth up to 1 m for 30 minutes without any damage caused to the device or its components. Radio equipment operating at depths greater than 1 m require totally sealed waterproof connectors as there is no room for error if proper operation of these devices depends on receiving a clear signal from outer space.
Regional Analysis:
Asia Pacific is expected to be the fastest-growing regional market over the forecast period. The growth can be attributed to increasing investments in various sectors, such as defense and marine. For instance, China has planned to use its low budget for military purposes by 2025 and thus it requires less spending on warfare equipment and weapons. It aims at producing high quality products with low prices thereby making it a lucrative market for waterproof connectors in future years.
Europe is also anticipated to witness significant growth over the next eight years owing to increasing demand from telecom sector especially in UEMEA region due to increased adoption of outdoor wireless communication systems based on radio frequency (RF) technologies such as LMR/MMR/IMR among others that require installation of antenna systems outdoors which are highly susceptible towards moisture ingress into connectors & cables assembly resulting damage or failure of system operation etc.
Growth Factors:
- Increasing demand from the automotive industry for waterproof connectors
- Growing demand for miniaturized and high-density connectors in consumer electronics
- Rising popularity of wearable technology and the Internet of Things (IoT)
- Proliferation of smart devices and increasing need for reliable connectivity solutions
- Emergence of new applications such as electric vehicles, 3D printing, and medical implants that require waterproof connectors
Scope Of The Report
Report Attributes
Report Details
Report Title
Waterproof Connectors Market Research Report
By Type
Panel Sealed Waterproof Connectors, Totally Sealed Waterproof Connectors
By Application
Wireless Telecom Antennas, Radio Equipment, Tactical Radios, Outdoor Sensors, Others
By Companies
Molex, Amphenol LTW, JST Belgium NV, HTP ASIA TECHNOLOGY CO.,LTD, Hirose Electric Co Ltd, Mouser Electronics, Switchcraft, Chogori USA, Narva
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
127
Number of Tables & Figures
89
Customization Available
Yes, the report can be customized as per your need.
Global Waterproof Connectors Market Report Segments:
The global Waterproof Connectors market is segmented on the basis of:
Types
Panel Sealed Waterproof Connectors, Totally Sealed Waterproof Connectors
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Wireless Telecom Antennas, Radio Equipment, Tactical Radios, Outdoor Sensors, Others
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- Molex
- Amphenol LTW
- JST Belgium NV
- HTP ASIA TECHNOLOGY CO.,LTD
- Hirose Electric Co Ltd
- Mouser Electronics
- Switchcraft
- Chogori USA
- Narva
Highlights of The Waterproof Connectors Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- Panel Sealed Waterproof Connectors
- Totally Sealed Waterproof Connectors
- By Application:
- Wireless Telecom Antennas
- Radio Equipment
- Tactical Radios
- Outdoor Sensors
- Others
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Waterproof Connectors Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
Waterproof connectors are a type of connector that is designed to be waterproof. This means that the connector can withstand water exposure without causing damage. Waterproof connectors are often used in applications where water is a potential hazard, such as in outdoor lighting or construction sites.
Some of the major players in the waterproof connectors market are Molex, Amphenol LTW, JST Belgium NV, HTP ASIA TECHNOLOGY CO.,LTD, Hirose Electric Co Ltd, Mouser Electronics, Switchcraft, Chogori USA, Narva.
The waterproof connectors market is expected to grow at a compound annual growth rate of 5.5%.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Waterproof Connectors Market Overview
4.1 Introduction
4.1.1 Market Taxonomy
4.1.2 Market Definition
4.1.3 Macro-Economic Factors Impacting the Market Growth
4.2 Waterproof Connectors Market Dynamics
4.2.1 Market Drivers
4.2.2 Market Restraints
4.2.3 Market Opportunity
4.3 Waterproof Connectors Market - Supply Chain Analysis
4.3.1 List of Key Suppliers
4.3.2 List of Key Distributors
4.3.3 List of Key Consumers
4.4 Key Forces Shaping the Waterproof Connectors Market
4.4.1 Bargaining Power of Suppliers
4.4.2 Bargaining Power of Buyers
4.4.3 Threat of Substitution
4.4.4 Threat of New Entrants
4.4.5 Competitive Rivalry
4.5 Global Waterproof Connectors Market Size & Forecast, 2018-2028
4.5.1 Waterproof Connectors Market Size and Y-o-Y Growth
4.5.2 Waterproof Connectors Market Absolute $ Opportunity
Chapter 5 Global Waterproof Connectors Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Waterproof Connectors Market Size Forecast by Type
5.2.1 Panel Sealed Waterproof Connectors
5.2.2 Totally Sealed Waterproof Connectors
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Waterproof Connectors Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Waterproof Connectors Market Size Forecast by Applications
6.2.1 Wireless Telecom Antennas
6.2.2 Radio Equipment
6.2.3 Tactical Radios
6.2.4 Outdoor Sensors
6.2.5 Others
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Waterproof Connectors Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Waterproof Connectors Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Waterproof Connectors Analysis and Forecast
9.1 Introduction
9.2 North America Waterproof Connectors Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Waterproof Connectors Market Size Forecast by Type
9.6.1 Panel Sealed Waterproof Connectors
9.6.2 Totally Sealed Waterproof Connectors
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Waterproof Connectors Market Size Forecast by Applications
9.10.1 Wireless Telecom Antennas
9.10.2 Radio Equipment
9.10.3 Tactical Radios
9.10.4 Outdoor Sensors
9.10.5 Others
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Waterproof Connectors Analysis and Forecast
10.1 Introduction
10.2 Europe Waterproof Connectors Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Waterproof Connectors Market Size Forecast by Type
10.6.1 Panel Sealed Waterproof Connectors
10.6.2 Totally Sealed Waterproof Connectors
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Waterproof Connectors Market Size Forecast by Applications
10.10.1 Wireless Telecom Antennas
10.10.2 Radio Equipment
10.10.3 Tactical Radios
10.10.4 Outdoor Sensors
10.10.5 Others
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Waterproof Connectors Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Waterproof Connectors Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Waterproof Connectors Market Size Forecast by Type
11.6.1 Panel Sealed Waterproof Connectors
11.6.2 Totally Sealed Waterproof Connectors
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Waterproof Connectors Market Size Forecast by Applications
11.10.1 Wireless Telecom Antennas
11.10.2 Radio Equipment
11.10.3 Tactical Radios
11.10.4 Outdoor Sensors
11.10.5 Others
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Waterproof Connectors Analysis and Forecast
12.1 Introduction
12.2 Latin America Waterproof Connectors Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Waterproof Connectors Market Size Forecast by Type
12.6.1 Panel Sealed Waterproof Connectors
12.6.2 Totally Sealed Waterproof Connectors
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Waterproof Connectors Market Size Forecast by Applications
12.10.1 Wireless Telecom Antennas
12.10.2 Radio Equipment
12.10.3 Tactical Radios
12.10.4 Outdoor Sensors
12.10.5 Others
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Waterproof Connectors Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Waterproof Connectors Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Waterproof Connectors Market Size Forecast by Type
13.6.1 Panel Sealed Waterproof Connectors
13.6.2 Totally Sealed Waterproof Connectors
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Waterproof Connectors Market Size Forecast by Applications
13.10.1 Wireless Telecom Antennas
13.10.2 Radio Equipment
13.10.3 Tactical Radios
13.10.4 Outdoor Sensors
13.10.5 Others
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Waterproof Connectors Market: Competitive Dashboard
14.2 Global Waterproof Connectors Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 Molex
14.3.2 Amphenol LTW
14.3.3 JST Belgium NV
14.3.4 HTP ASIA TECHNOLOGY CO.,LTD
14.3.5 Hirose Electric Co Ltd
14.3.6 Mouser Electronics
14.3.7 Switchcraft
14.3.8 Chogori USA
14.3.9 Narva
