Market Overview:
The global wet area mats market is expected to grow at a CAGR of 5.5% during the forecast period from 2018 to 2030. The growth in this market can be attributed to the increasing demand for wet area mats from residential areas, commercial areas, and industrial areas. In terms of type, the thermoplastic rubber segment is expected to lead the global wet area mats market during the forecast period. This can be attributed to its properties such as durability and resistance against weathering conditions. In terms of application, the residential areas segment is expected to lead the global wet area mats market during the forecast period.
Product Definition:
A wet area mat is a piece of rubber or other waterproof material that is placed in an area where water may be present, such as a shower or bath. These mats help to prevent slips and falls by providing a surface that is less slippery than tile or concrete. They are also important for preventing the growth of mold and bacteria, which can occur when water is not cleaned up quickly.
Thermoplastic Rubber:
Thermoplastic rubber is a polymer, which has high resistance to heat and chemicals. It can be re-molded and reshaped after being heated. Thermoplastic rubbers are widely used in the manufacturing of mats, flooring & wall coverings, hoses & tubes for industrial applications owing to their excellent properties such as abrasion resistance, flexibility at low temperatures along with good sealing characteristics.
PVC:
Polyvinyl Chloride or PVC is a thermoplastic polymer. It is produced from the reaction of vinyl chloride and chlorine. It has high resistance to chemicals, heat, and light making it suitable for applications in wet areas such as bathrooms, kitchens, laundry rooms and garages among others.
Wet area mats are used in bathroom floors where frequent mopping is required due to water leakage or moisture formation on the floor which cannot be absorbed by the surface beneath.
Application Insights:
The commercial areas segment dominated the global market in terms of revenue share in 2017. The growth can be attributed to the increasing construction activities for commercial spaces, such as offices, showrooms and malls. In addition, with rising population and consumer demand, retail space has been expanding at a rapid pace across the globe. This is likely to fuel product demand over the forecast period.
The residential areas segment is expected to witness significant growth over the forecast period owing to an increase in urbanization trends across various regions of the world including Asia Pacific and Middle East & Africa countries.
Regional Analysis:
Asia Pacific dominated the global market in 2017 and is expected to continue its dominance over the forecast period. The growth of this region can be attributed to rapid urbanization, increasing population, rising disposable income levels, and growing construction activities. Moreover, government initiatives encouraging FDI for infrastructure development are likely to contribute toward industry growth in Asia Pacific.
The European region accounted for a significant share of revenue in 2017 owing to high demand from residential as well as commercial applications. In addition, stringent regulations by various regulatory bodies such as Building Standards Code (BSC) and Passive House Institute Germany (PHIG) regarding building materials used for constructing buildings is projected favorably impact industry growth over the next eight years.
Growth Factors:
- Increasing demand from the hospitality sector for hygiene and safety reasons
- Rising awareness about the benefits of using wet area mats among consumers
- Growing popularity of eco-friendly products among consumers
- Proliferation of online retail platforms that offer a wide range of wet area mats at competitive prices
- Entry of new players in the market that are offering innovative and high-quality wet area mats
Scope Of The Report
Report Attributes
Report Details
Report Title
Wet Area Mats Market Research Report
By Type
Thermoplastic Rubber, PVC, Others
By Application
Residential Areas, Commercial Areas, Industrial Areas
By Companies
3M, NoTrax, Wearwell, The Andersen Company, ALECO, American Mat Rubber, Birrus Matting Systems, Cintas, Crown Matting Technologies, DURABLE, 3M, GEGGUS, Kleen-Tex Industries, Matco, Milliken & Company, Muovihaka, Ranco Industries, UniFirst., Mountville Mills
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
217
Number of Tables & Figures
152
Customization Available
Yes, the report can be customized as per your need.
Global Wet Area Mats Market Report Segments:
The global Wet Area Mats market is segmented on the basis of:
Types
Thermoplastic Rubber, PVC, Others
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Residential Areas, Commercial Areas, Industrial Areas
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- 3M
- NoTrax
- Wearwell
- The Andersen Company
- ALECO
- American Mat Rubber
- Birrus Matting Systems
- Cintas
- Crown Matting Technologies
- DURABLE
- 3M
- GEGGUS
- Kleen-Tex Industries
- Matco
- Milliken & Company
- Muovihaka
- Ranco Industries
- UniFirst.
- Mountville Mills
Highlights of The Wet Area Mats Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- Thermoplastic Rubber
- PVC
- Others
- By Application:
- Residential Areas
- Commercial Areas
- Industrial Areas
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Wet Area Mats Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
Wet area mats are a type of mat designed to protect floors and surfaces from water damage. They are typically made of a waterproof material, such as rubber, and have adhesive backing that can be attached to the floor or surface. When wet, the adhesive will hold the mat in place until it is dry.
Some of the major players in the wet area mats market are 3M, NoTrax, Wearwell, The Andersen Company, ALECO, American Mat Rubber, Birrus Matting Systems, Cintas, Crown Matting Technologies, DURABLE, 3M, GEGGUS, Kleen-Tex Industries, Matco, Milliken & Company, Muovihaka, Ranco Industries, UniFirst., Mountville Mills.
The wet area mats market is expected to grow at a compound annual growth rate of 5.5%.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Wet Area Mats Market Overview 4.1 Introduction 4.1.1 Market Taxonomy 4.1.2 Market Definition 4.1.3 Macro-Economic Factors Impacting the Market Growth 4.2 Wet Area Mats Market Dynamics 4.2.1 Market Drivers 4.2.2 Market Restraints 4.2.3 Market Opportunity 4.3 Wet Area Mats Market - Supply Chain Analysis 4.3.1 List of Key Suppliers 4.3.2 List of Key Distributors 4.3.3 List of Key Consumers 4.4 Key Forces Shaping the Wet Area Mats Market 4.4.1 Bargaining Power of Suppliers 4.4.2 Bargaining Power of Buyers 4.4.3 Threat of Substitution 4.4.4 Threat of New Entrants 4.4.5 Competitive Rivalry 4.5 Global Wet Area Mats Market Size & Forecast, 2018-2028 4.5.1 Wet Area Mats Market Size and Y-o-Y Growth 4.5.2 Wet Area Mats Market Absolute $ Opportunity
Chapter 5 Global Wet Area Mats Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Wet Area Mats Market Size Forecast by Type
5.2.1 Thermoplastic Rubber
5.2.2 PVC
5.2.3 Others
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Wet Area Mats Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Wet Area Mats Market Size Forecast by Applications
6.2.1 Residential Areas
6.2.2 Commercial Areas
6.2.3 Industrial Areas
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Wet Area Mats Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Wet Area Mats Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Wet Area Mats Analysis and Forecast
9.1 Introduction
9.2 North America Wet Area Mats Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Wet Area Mats Market Size Forecast by Type
9.6.1 Thermoplastic Rubber
9.6.2 PVC
9.6.3 Others
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Wet Area Mats Market Size Forecast by Applications
9.10.1 Residential Areas
9.10.2 Commercial Areas
9.10.3 Industrial Areas
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Wet Area Mats Analysis and Forecast
10.1 Introduction
10.2 Europe Wet Area Mats Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Wet Area Mats Market Size Forecast by Type
10.6.1 Thermoplastic Rubber
10.6.2 PVC
10.6.3 Others
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Wet Area Mats Market Size Forecast by Applications
10.10.1 Residential Areas
10.10.2 Commercial Areas
10.10.3 Industrial Areas
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Wet Area Mats Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Wet Area Mats Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Wet Area Mats Market Size Forecast by Type
11.6.1 Thermoplastic Rubber
11.6.2 PVC
11.6.3 Others
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Wet Area Mats Market Size Forecast by Applications
11.10.1 Residential Areas
11.10.2 Commercial Areas
11.10.3 Industrial Areas
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Wet Area Mats Analysis and Forecast
12.1 Introduction
12.2 Latin America Wet Area Mats Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Wet Area Mats Market Size Forecast by Type
12.6.1 Thermoplastic Rubber
12.6.2 PVC
12.6.3 Others
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Wet Area Mats Market Size Forecast by Applications
12.10.1 Residential Areas
12.10.2 Commercial Areas
12.10.3 Industrial Areas
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Wet Area Mats Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Wet Area Mats Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Wet Area Mats Market Size Forecast by Type
13.6.1 Thermoplastic Rubber
13.6.2 PVC
13.6.3 Others
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Wet Area Mats Market Size Forecast by Applications
13.10.1 Residential Areas
13.10.2 Commercial Areas
13.10.3 Industrial Areas
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Wet Area Mats Market: Competitive Dashboard
14.2 Global Wet Area Mats Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 3M
14.3.2 NoTrax
14.3.3 Wearwell
14.3.4 The Andersen Company
14.3.5 ALECO
14.3.6 American Mat Rubber
14.3.7 Birrus Matting Systems
14.3.8 Cintas
14.3.9 Crown Matting Technologies
14.3.10 DURABLE
14.3.11 3M
14.3.12 GEGGUS
14.3.13 Kleen-Tex Industries
14.3.14 Matco
14.3.15 Milliken & Company
14.3.16 Muovihaka
14.3.17 Ranco Industries
14.3.18 UniFirst.
14.3.19 Mountville Mills