Market Overview:
The global wet-laid fiberglass mat market is expected to grow at a CAGR of 5.5% from 2018 to 2030. The growth in the market can be attributed to the increasing demand for wet-laid fiberglass mats from various applications, such as interior and exterior wall decoration, building waterproof material, electronic substrate (copper clad laminate), anticorrosion of tank and vehicle body, carpet reinforcement, and others. Asia Pacific is expected to be the fastest growing region during the forecast period.
Product Definition:
Wet-laid fiberglass mat is a sheet of fiberglass that has been formed by laying the fibers in a water bath. The wet fibers are then laid out in a sheet and the water is squeezed out. The mat can be used as is or it can be dried and used as insulation, roofing material, or other applications.
Battery Separator Tissue:
Battery separator tissue is a type of organic material that is used to separate the positive and negative sides of a battery. It has applications in wet-laid fiberglass mat (WLFGM) production as well. The main function of this product includes the separation of fibers from each other and from the resin during the manufacturing process, which helps in improving overall quality and increasing productivity.
Wall Covering Tissue:
Wall covering tissue is a type of plastic sheeting that is used as a protective cover on the wet-laid fiberglass mat in wall cavities. It helps to protect the fiberglass from scratches, dents and abrasion damage and also serves as an insulating layer between the wall surface and carpet fibers.
The product can be easily installed over any smooth surface with the help of adhesive tapes or double-sided tape guns.
Application Insights:
Building waterproof material was the major application segment in 2016 and accounted for over 40% of the overall market. The product is used to cover the subsoil water-course where it acts as a barrier against water penetration, thereby preventing any damage to building structure. Increasing demand for aesthetic interiors coupled with rising use of fiberglass matting in external wall applications owing to its superior insulation properties is expected to propel growth over the forecast period.
The others segment includes carpet reinforcement, pipe covering, tank lining and vehicle body anticorrosion purposes. Matting plays an important role in these applications by providing thermal resistance against hot or cold liquids or gases that are transported through pipes or tanks respectively on account of its high insulation value (R-value). In addition, it also provides protection from corrosion due to which such products are gaining popularity day by day among various industries across the globe.
Regional Analysis:
Asia Pacific dominated the global market in terms of revenue with a share of over 60% in 2017. The region is expected to witness significant growth over the forecast period owing to increasing construction activities and growing automotive industry across countries such as China, India, Indonesia, Malaysia and Thailand.
The demand for wet-laid fiberglass mat in Europe is anticipated to grow at a moderate pace due to stringent environmental regulations regarding waste disposal coupled with rising consumer awareness regarding product benefits. However, rapid growth of the building & construction sector on account of economic recovery post recession is likely to provide an impetus for regional product demand. Moreover, favorable government initiatives aimed at promoting electric vehicles are also expected drive regional product sales over the forecast period.
North America emerged as one of the prominent markets for wet-laid fiberglass mats owing its extensive usage in flooring applications including carpet tiles.
Growth Factors:
- Increasing demand for lightweight and durable materials in automotive and aerospace industries
- Growing demand for insulation materials in construction industry
- Rising awareness about the benefits of wet-laid fiberglass mats among consumers
- Technological advancements that have led to the development of new applications for wet-laid fiberglass mats
- Expansion of global manufacturing base by key players in the market
Scope Of The Report
Report Attributes
Report Details
Report Title
Wet-Laid Fiberglass Mat Market Research Report
By Type
Battery Separator Tissue, Wall Covering Tissue, Carpet Tiles Tissue, Pipe Tissue, Roofing Tissue, Surfacing Tissue, Coated Tissue for Gypsum Sheathing, PCB Electronic Mat (Copper Clad Laminate Mat)
By Application
Interior and Exterior Wall Decoration, Building Waterproof Material, Electronic Substrate (Copper Clad Laminate), Anticorrosion of Tank and Vehicle Body, Carpet Reinforcement, Others
By Companies
Jiangsu Changhai, Taishan Fiberglass Inc, Sinomajj, Changzhou Zhongxin Tianma, Shanxi Huatek New Material Inc, Saint Gobain, Johns-Manville, Own Cornings, Changzhou Changxiaong Glass Fiber Composites, Shandong Fiberglass Group
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
218
Number of Tables & Figures
153
Customization Available
Yes, the report can be customized as per your need.
Global Wet-Laid Fiberglass Mat Market Report Segments:
The global Wet-Laid Fiberglass Mat market is segmented on the basis of:
Types
Battery Separator Tissue, Wall Covering Tissue, Carpet Tiles Tissue, Pipe Tissue, Roofing Tissue, Surfacing Tissue, Coated Tissue for Gypsum Sheathing, PCB Electronic Mat (Copper Clad Laminate Mat)
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Interior and Exterior Wall Decoration, Building Waterproof Material, Electronic Substrate (Copper Clad Laminate), Anticorrosion of Tank and Vehicle Body, Carpet Reinforcement, Others
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- Jiangsu Changhai
- Taishan Fiberglass Inc
- Sinomajj
- Changzhou Zhongxin Tianma
- Shanxi Huatek New Material Inc
- Saint Gobain
- Johns-Manville
- Own Cornings
- Changzhou Changxiaong Glass Fiber Composites
- Shandong Fiberglass Group
Highlights of The Wet-Laid Fiberglass Mat Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- Battery Separator Tissue
- Wall Covering Tissue
- Carpet Tiles Tissue
- Pipe Tissue
- Roofing Tissue
- Surfacing Tissue
- Coated Tissue for Gypsum Sheathing
- PCB Electronic Mat (Copper Clad Laminate Mat)
- By Application:
- Interior and Exterior Wall Decoration
- Building Waterproof Material
- Electronic Substrate (Copper Clad Laminate)
- Anticorrosion of Tank and Vehicle Body
- Carpet Reinforcement
- Others
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Wet-Laid Fiberglass Mat Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
Wet-laid fiberglass mat is a type of insulation made from fiberglass cloth that has been saturated with water and then laid in a mold. The fibers are so saturated that they form a continuous sheet, with no gaps or overlaps. This makes the mat very dense and resistant to moisture vapor transmission, which is why it's often used in areas where there is potential for water damage.
Some of the key players operating in the wet-laid fiberglass mat market are Jiangsu Changhai, Taishan Fiberglass Inc, Sinomajj, Changzhou Zhongxin Tianma, Shanxi Huatek New Material Inc, Saint Gobain, Johns-Manville, Own Cornings, Changzhou Changxiaong Glass Fiber Composites, Shandong Fiberglass Group.
The wet-laid fiberglass mat market is expected to register a CAGR of 5.5%.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Wet-Laid Fiberglass Mat Market Overview
4.1 Introduction
4.1.1 Market Taxonomy
4.1.2 Market Definition
4.1.3 Macro-Economic Factors Impacting the Market Growth
4.2 Wet-Laid Fiberglass Mat Market Dynamics
4.2.1 Market Drivers
4.2.2 Market Restraints
4.2.3 Market Opportunity
4.3 Wet-Laid Fiberglass Mat Market - Supply Chain Analysis
4.3.1 List of Key Suppliers
4.3.2 List of Key Distributors
4.3.3 List of Key Consumers
4.4 Key Forces Shaping the Wet-Laid Fiberglass Mat Market
4.4.1 Bargaining Power of Suppliers
4.4.2 Bargaining Power of Buyers
4.4.3 Threat of Substitution
4.4.4 Threat of New Entrants
4.4.5 Competitive Rivalry
4.5 Global Wet-Laid Fiberglass Mat Market Size & Forecast, 2020-2028
4.5.1 Wet-Laid Fiberglass Mat Market Size and Y-o-Y Growth
4.5.2 Wet-Laid Fiberglass Mat Market Absolute $ Opportunity
Chapter 5 Global Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Market Size Forecast by Type
5.2.1 Battery Separator Tissue
5.2.2 Wall Covering Tissue
5.2.3 Carpet Tiles Tissue
5.2.4 Pipe Tissue
5.2.5 Roofing Tissue
5.2.6 Surfacing Tissue
5.2.7 Coated Tissue for Gypsum Sheathing
5.2.8 PCB Electronic Mat (Copper Clad Laminate Mat)
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Market Size Forecast by Applications
6.2.1 Interior and Exterior Wall Decoration
6.2.2 Building Waterproof Material
6.2.3 Electronic Substrate (Copper Clad Laminate)
6.2.4 Anticorrosion of Tank and Vehicle Body
6.2.5 Carpet Reinforcement
6.2.6 Others
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Wet-Laid Fiberglass Mat Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Wet-Laid Fiberglass Mat Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Analysis and Forecast
9.1 Introduction
9.2 North America Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Market Size Forecast by Type
9.6.1 Battery Separator Tissue
9.6.2 Wall Covering Tissue
9.6.3 Carpet Tiles Tissue
9.6.4 Pipe Tissue
9.6.5 Roofing Tissue
9.6.6 Surfacing Tissue
9.6.7 Coated Tissue for Gypsum Sheathing
9.6.8 PCB Electronic Mat (Copper Clad Laminate Mat)
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Market Size Forecast by Applications
9.10.1 Interior and Exterior Wall Decoration
9.10.2 Building Waterproof Material
9.10.3 Electronic Substrate (Copper Clad Laminate)
9.10.4 Anticorrosion of Tank and Vehicle Body
9.10.5 Carpet Reinforcement
9.10.6 Others
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Analysis and Forecast
10.1 Introduction
10.2 Europe Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Market Size Forecast by Type
10.6.1 Battery Separator Tissue
10.6.2 Wall Covering Tissue
10.6.3 Carpet Tiles Tissue
10.6.4 Pipe Tissue
10.6.5 Roofing Tissue
10.6.6 Surfacing Tissue
10.6.7 Coated Tissue for Gypsum Sheathing
10.6.8 PCB Electronic Mat (Copper Clad Laminate Mat)
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Market Size Forecast by Applications
10.10.1 Interior and Exterior Wall Decoration
10.10.2 Building Waterproof Material
10.10.3 Electronic Substrate (Copper Clad Laminate)
10.10.4 Anticorrosion of Tank and Vehicle Body
10.10.5 Carpet Reinforcement
10.10.6 Others
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Market Size Forecast by Type
11.6.1 Battery Separator Tissue
11.6.2 Wall Covering Tissue
11.6.3 Carpet Tiles Tissue
11.6.4 Pipe Tissue
11.6.5 Roofing Tissue
11.6.6 Surfacing Tissue
11.6.7 Coated Tissue for Gypsum Sheathing
11.6.8 PCB Electronic Mat (Copper Clad Laminate Mat)
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Market Size Forecast by Applications
11.10.1 Interior and Exterior Wall Decoration
11.10.2 Building Waterproof Material
11.10.3 Electronic Substrate (Copper Clad Laminate)
11.10.4 Anticorrosion of Tank and Vehicle Body
11.10.5 Carpet Reinforcement
11.10.6 Others
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Analysis and Forecast
12.1 Introduction
12.2 Latin America Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Market Size Forecast by Type
12.6.1 Battery Separator Tissue
12.6.2 Wall Covering Tissue
12.6.3 Carpet Tiles Tissue
12.6.4 Pipe Tissue
12.6.5 Roofing Tissue
12.6.6 Surfacing Tissue
12.6.7 Coated Tissue for Gypsum Sheathing
12.6.8 PCB Electronic Mat (Copper Clad Laminate Mat)
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Market Size Forecast by Applications
12.10.1 Interior and Exterior Wall Decoration
12.10.2 Building Waterproof Material
12.10.3 Electronic Substrate (Copper Clad Laminate)
12.10.4 Anticorrosion of Tank and Vehicle Body
12.10.5 Carpet Reinforcement
12.10.6 Others
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Market Size Forecast by Type
13.6.1 Battery Separator Tissue
13.6.2 Wall Covering Tissue
13.6.3 Carpet Tiles Tissue
13.6.4 Pipe Tissue
13.6.5 Roofing Tissue
13.6.6 Surfacing Tissue
13.6.7 Coated Tissue for Gypsum Sheathing
13.6.8 PCB Electronic Mat (Copper Clad Laminate Mat)
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Market Size Forecast by Applications
13.10.1 Interior and Exterior Wall Decoration
13.10.2 Building Waterproof Material
13.10.3 Electronic Substrate (Copper Clad Laminate)
13.10.4 Anticorrosion of Tank and Vehicle Body
13.10.5 Carpet Reinforcement
13.10.6 Others
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Wet-Laid Fiberglass Mat Market: Competitive Dashboard
14.2 Global Wet-Laid Fiberglass Mat Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 Jiangsu Changhai
14.3.2 Taishan Fiberglass Inc
14.3.3 Sinomajj
14.3.4 Changzhou Zhongxin Tianma
14.3.5 Shanxi Huatek New Material Inc
14.3.6 Saint Gobain
14.3.7 Johns-Manville
14.3.8 Own Cornings
14.3.9 Changzhou Changxiaong Glass Fiber Composites
14.3.10 Shandong Fiberglass Group
