Market Overview:
The global x-ray cameras market is expected to grow at a CAGR of 6.5% from 2018 to 2030. The growth in the market can be attributed to the increasing demand for x-ray cameras in food inspection, industrial inspection, composite material inspection, metal detection, and other applications. Based on type, the global x-ray cameras market is segmented into CCD-based and sCMOS-based x-ray cameras. The CCD-based segment is expected to hold a larger share of the global x-ray camera market during the forecast period owing to its high image quality and low noise levels. Based on application, the global x ray camera market is segmented into foods inspection, industrial inspection, composite material inspection,, metal detection,, and other applications.
Product Definition:
An X-ray camera is a device used to produce images of the inside of an object using X-rays. The images can be used to determine the composition and structure of the object.
Based CCD:
Based Continuous Cladding Development, also known as Based CCPD (Based on Continuous Plates and Disks), is a technology used in X-ray cameras to provide high quality images. It utilizes aluminum plates or disks along with the regular film for capturing image files of diagnostic images. The major advantage provided by this technology is that it does not require any special light source which makes it stand out among other technologies available in the market.
Based sCMOS:
Based sCMOS is a new technology that combines the advantages of both optical and electrical sensing in CMOS image sensors. It enables to obtain high sensitivity with low dark current, which is essential for an X-ray imaging sensor.
Application Insights:
The composite material segment is projected to witness significant growth over the forecast period. The development of x-ray cameras for composites has been a tedious task due to the lack of standardization in terms of both hardware and software. However, with the increasing demand for lightweight and high-performance materials, this application segment is expected to grow significantly over the forecast period.
The food sector was one of the major applications that adopted LEO satellite technology owing to its high precision level required in order to avoid any potential health hazards associated with food products during transportation or storage at different temperatures. Moreover, rising concerns regarding product quality coupled with an increase in spending capacity are anticipated drive this application segment significantly over the next eight years.
Regional Analysis:
North America dominated the global market in 2017. The growth is attributed to the presence of a large number of security camera manufacturers and retailers, high spending power, and government initiatives for safety improvement at airports & railway stations. Europe accounted for a significant share in terms of revenue as well as volume in 2017 owing to growing concerns over terrorism across countries including France, Germany, Italy among others. Asia Pacific is expected to witness substantial growth over the forecast period owing to increasing demand from emerging economies such as China and India among others. Rising crime rate coupled with growing awareness about body worn cameras will drive product demand further. For instance; In India; many states are using these cameras on an experimental basis or have passed regulations governing their use (for example: Karnataka Police Department).
Growth Factors:
- Increasing demand for X-Ray Cameras in medical and security applications
- Growing popularity of portable X-Ray Cameras
- Rising demand for high-resolution X-Ray Cameras
- Proliferation of digital radiography systems
- Technological advancements in X-Ray Camera technology
Scope Of The Report
Report Attributes
Report Details
Report Title
X-Ray Cameras Market Research Report
By Type
Based CCD, Based sCMOS
By Application
Foods, Industrial, Composite Material, Metal Detection, Others
By Companies
Oxford Instruments, Ximea, Hamamatsu, Photonic Science, Crytur, NTB Elektronische Geraete GmbH, Raptor Photonics Limited, PNDetector, Quantum Design International, Princeton Instruments
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
175
Number of Tables & Figures
123
Customization Available
Yes, the report can be customized as per your need.
Global X-Ray Cameras Market Report Segments:
The global X-Ray Cameras market is segmented on the basis of:
Types
Based CCD, Based sCMOS
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Foods, Industrial, Composite Material, Metal Detection, Others
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- Oxford Instruments
- Ximea
- Hamamatsu
- Photonic Science
- Crytur
- NTB Elektronische Geraete GmbH
- Raptor Photonics Limited
- PNDetector
- Quantum Design International
- Princeton Instruments
Highlights of The X-Ray Cameras Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- Based CCD
- Based sCMOS
- By Application:
- Foods
- Industrial
- Composite Material
- Metal Detection
- Others
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the X-Ray Cameras Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
X-Ray Cameras are a type of camera that uses X-rays to image objects. They can be used to see inside objects, such as bones or organs, and can also be used to image the structure of materials like metals.
Some of the major players in the x-ray cameras market are Oxford Instruments, Ximea, Hamamatsu, Photonic Science, Crytur, NTB Elektronische Geraete GmbH, Raptor Photonics Limited, PNDetector, Quantum Design International, Princeton Instruments.
The x-ray cameras market is expected to grow at a compound annual growth rate of 6.5%.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 X-Ray Cameras Market Overview 4.1 Introduction 4.1.1 Market Taxonomy 4.1.2 Market Definition 4.1.3 Macro-Economic Factors Impacting the Market Growth 4.2 X-Ray Cameras Market Dynamics 4.2.1 Market Drivers 4.2.2 Market Restraints 4.2.3 Market Opportunity 4.3 X-Ray Cameras Market - Supply Chain Analysis 4.3.1 List of Key Suppliers 4.3.2 List of Key Distributors 4.3.3 List of Key Consumers 4.4 Key Forces Shaping the X-Ray Cameras Market 4.4.1 Bargaining Power of Suppliers 4.4.2 Bargaining Power of Buyers 4.4.3 Threat of Substitution 4.4.4 Threat of New Entrants 4.4.5 Competitive Rivalry 4.5 Global X-Ray Cameras Market Size & Forecast, 2020-2028 4.5.1 X-Ray Cameras Market Size and Y-o-Y Growth 4.5.2 X-Ray Cameras Market Absolute $ Opportunity
Chapter 5 Global Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Market Size Forecast by Type
5.2.1 Based CCD
5.2.2 Based sCMOS
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Market Size Forecast by Applications
6.2.1 Foods
6.2.2 Industrial
6.2.3 Composite Material
6.2.4 Metal Detection
6.2.5 Others
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global X-Ray Cameras Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 X-Ray Cameras Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Analysis and Forecast
9.1 Introduction
9.2 North America Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Market Size Forecast by Type
9.6.1 Based CCD
9.6.2 Based sCMOS
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Market Size Forecast by Applications
9.10.1 Foods
9.10.2 Industrial
9.10.3 Composite Material
9.10.4 Metal Detection
9.10.5 Others
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Analysis and Forecast
10.1 Introduction
10.2 Europe Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Market Size Forecast by Type
10.6.1 Based CCD
10.6.2 Based sCMOS
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Market Size Forecast by Applications
10.10.1 Foods
10.10.2 Industrial
10.10.3 Composite Material
10.10.4 Metal Detection
10.10.5 Others
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Market Size Forecast by Type
11.6.1 Based CCD
11.6.2 Based sCMOS
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Market Size Forecast by Applications
11.10.1 Foods
11.10.2 Industrial
11.10.3 Composite Material
11.10.4 Metal Detection
11.10.5 Others
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Analysis and Forecast
12.1 Introduction
12.2 Latin America Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Market Size Forecast by Type
12.6.1 Based CCD
12.6.2 Based sCMOS
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Market Size Forecast by Applications
12.10.1 Foods
12.10.2 Industrial
12.10.3 Composite Material
12.10.4 Metal Detection
12.10.5 Others
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Market Size Forecast by Type
13.6.1 Based CCD
13.6.2 Based sCMOS
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Market Size Forecast by Applications
13.10.1 Foods
13.10.2 Industrial
13.10.3 Composite Material
13.10.4 Metal Detection
13.10.5 Others
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 X-Ray Cameras Market: Competitive Dashboard
14.2 Global X-Ray Cameras Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 Oxford Instruments
14.3.2 Ximea
14.3.3 Hamamatsu
14.3.4 Photonic Science
14.3.5 Crytur
14.3.6 NTB Elektronische Geraete GmbH
14.3.7 Raptor Photonics Limited
14.3.8 PNDetector
14.3.9 Quantum Design International
14.3.10 Princeton Instruments