Market Overview:
The global x-ray tubes for CT market is expected to grow at a CAGR of 5.5% during the forecast period from 2018 to 2030. The growth in this market can be attributed to the increasing demand for diagnostic and therapeutic procedures, technological advancements in x-ray tube technology, and rising number of hospitals and clinics. Based on type, the stationary anode x-ray tube segment is expected to account for the largest share of the global x-ray tubes for CT market in 2018. This segment is also projected to grow at a higher CAGR than other segments during the forecast period. The large share and high growth rate of this segment can be attributed to factors such as low power consumption, longer life span, and low maintenance cost as compared with rotating anode X-ray tubes. Based on application, hospitals are expected to account for the largest share of the global x-ray tubes for CT market in 2018.
Product Definition:
An X-ray tube is a vacuum tube that emits X-rays when an electric current passes through it. They are used in CT scanners to create images of the inside of the body.
Stationary Anode X-ray Tube:
Stationary anode X-ray tubes are used in computed tomography (CT) systems for the production of radiographs. CT is a diagnostic medical procedure that is performed to detect diseases or conditions by using X-rays as the source of radiation. The increasing demand for advanced technology and growing global geriatric population base are expected to drive market growth over the forecast period.
Rotating Anode X-ray Tube:
Rotating anode X-ray tube is a device that uses electrical energy to produce and scan X-rays. The rotating anode generates the X-rays by means of electron beam that is accelerated by high voltage. In comparison with stationary anode, the speed of rotation increases by thousand times, which results in providing more amount of exposure to the film in less time.
The advantages associated with this technology are; it provides excellent spatial resolution at low dose.
Application Insights:
Based on application, the global x-ray tubes for CT market is segmented into hospital, clinic, and others. The hospital segment dominated the market in 2017 owing to an increase in demand for computed radiography (CR) imaging as a diagnostic tool. CR provides accurate diagnosis by providing enhanced image quality when compared to conventional X-rays. Moreover, technological advancements such as introduction of digital radiology are further expected to propel product demand over the forecast period.
The clinic application segment is anticipated to witness significant growth over the forecast period due to increasing adoption of advanced imaging techniques such as Computed Tomography Colonography (CTC).
Regional Analysis:
North America dominated the global market in 2017 owing to the presence of well-established healthcare infrastructure, high adoption rate of advanced technologies, and increasing demand for diagnostic imaging services. Moreover, growing preference for computed radiography is expected to drive the product demand over the forecast period.
The Asia Pacific region is anticipated to witness lucrative growth over the coming years due to rising medical tourism and improving healthcare infrastructure in emerging countries such as India and China. In addition, an increase in government initiatives aimed at promoting early diagnosis coupled with a rise in disposable income will boost industry growth during this period.
Growth Factors:
- Increasing demand for CT scans for early detection of diseases and disorders
- Rising prevalence of chronic diseases such as cancer, heart disease, and stroke
- Advances in CT technology that offer improved image quality and faster scan times
- Growing number of imaging centers and hospitals offering CT services
- Increased use of CT scans in diagnostic procedures
Scope Of The Report
Report Attributes
Report Details
Report Title
X-ray tubes for CT Market Research Report
By Type
Stationary Anode X-ray Tube, Rotating Anode X-ray Tube
By Application
Hospital, Clinic, Others
By Companies
Siemens, GE, Dunlee(Philips), Varex imaging, IAE, Richardson Healthcare, Chronos imaging, Canon, RCAN, Kunshan Yiyuan Medical Technology Co., Ltd., Siemens
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
175
Number of Tables & Figures
123
Customization Available
Yes, the report can be customized as per your need.
Global X-ray tubes for CT Market Report Segments:
The global X-ray tubes for CT market is segmented on the basis of:
Types
Stationary Anode X-ray Tube, Rotating Anode X-ray Tube
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Hospital, Clinic, Others
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- Siemens
- GE
- Dunlee(Philips)
- Varex imaging
- IAE
- Richardson Healthcare
- Chronos imaging
- Canon
- RCAN
- Kunshan Yiyuan Medical Technology Co., Ltd.
- Siemens
Highlights of The X-ray tubes for CT Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- Stationary Anode X-ray Tube
- Rotating Anode X-ray Tube
- By Application:
- Hospital
- Clinic
- Others
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the X-ray tubes for CT Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
X-ray tubes are used for computed tomography (CT). CT scans use X-rays to create detailed images of the body.
Some of the major players in the x-ray tubes for ct market are Siemens, GE, Dunlee(Philips), Varex imaging, IAE, Richardson Healthcare, Chronos imaging, Canon, RCAN, Kunshan Yiyuan Medical Technology Co., Ltd., Siemens.
The x-ray tubes for ct market is expected to register a CAGR of 5.5%.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 X-ray tubes for CT Market Overview
4.1 Introduction
4.1.1 Market Taxonomy
4.1.2 Market Definition
4.1.3 Macro-Economic Factors Impacting the Market Growth
4.2 X-ray tubes for CT Market Dynamics
4.2.1 Market Drivers
4.2.2 Market Restraints
4.2.3 Market Opportunity
4.3 X-ray tubes for CT Market - Supply Chain Analysis
4.3.1 List of Key Suppliers
4.3.2 List of Key Distributors
4.3.3 List of Key Consumers
4.4 Key Forces Shaping the X-ray tubes for CT Market
4.4.1 Bargaining Power of Suppliers
4.4.2 Bargaining Power of Buyers
4.4.3 Threat of Substitution
4.4.4 Threat of New Entrants
4.4.5 Competitive Rivalry
4.5 Global X-ray tubes for CT Market Size & Forecast, 2018-2028
4.5.1 X-ray tubes for CT Market Size and Y-o-Y Growth
4.5.2 X-ray tubes for CT Market Absolute $ Opportunity
Chapter 5 Global X-ray tubes for CT Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 X-ray tubes for CT Market Size Forecast by Type
5.2.1 Stationary Anode X-ray Tube
5.2.2 Rotating Anode X-ray Tube
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global X-ray tubes for CT Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 X-ray tubes for CT Market Size Forecast by Applications
6.2.1 Hospital
6.2.2 Clinic
6.2.3 Others
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global X-ray tubes for CT Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 X-ray tubes for CT Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America X-ray tubes for CT Analysis and Forecast
9.1 Introduction
9.2 North America X-ray tubes for CT Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America X-ray tubes for CT Market Size Forecast by Type
9.6.1 Stationary Anode X-ray Tube
9.6.2 Rotating Anode X-ray Tube
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America X-ray tubes for CT Market Size Forecast by Applications
9.10.1 Hospital
9.10.2 Clinic
9.10.3 Others
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe X-ray tubes for CT Analysis and Forecast
10.1 Introduction
10.2 Europe X-ray tubes for CT Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe X-ray tubes for CT Market Size Forecast by Type
10.6.1 Stationary Anode X-ray Tube
10.6.2 Rotating Anode X-ray Tube
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe X-ray tubes for CT Market Size Forecast by Applications
10.10.1 Hospital
10.10.2 Clinic
10.10.3 Others
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific X-ray tubes for CT Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific X-ray tubes for CT Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific X-ray tubes for CT Market Size Forecast by Type
11.6.1 Stationary Anode X-ray Tube
11.6.2 Rotating Anode X-ray Tube
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific X-ray tubes for CT Market Size Forecast by Applications
11.10.1 Hospital
11.10.2 Clinic
11.10.3 Others
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America X-ray tubes for CT Analysis and Forecast
12.1 Introduction
12.2 Latin America X-ray tubes for CT Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America X-ray tubes for CT Market Size Forecast by Type
12.6.1 Stationary Anode X-ray Tube
12.6.2 Rotating Anode X-ray Tube
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America X-ray tubes for CT Market Size Forecast by Applications
12.10.1 Hospital
12.10.2 Clinic
12.10.3 Others
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) X-ray tubes for CT Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) X-ray tubes for CT Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) X-ray tubes for CT Market Size Forecast by Type
13.6.1 Stationary Anode X-ray Tube
13.6.2 Rotating Anode X-ray Tube
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) X-ray tubes for CT Market Size Forecast by Applications
13.10.1 Hospital
13.10.2 Clinic
13.10.3 Others
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 X-ray tubes for CT Market: Competitive Dashboard
14.2 Global X-ray tubes for CT Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 Siemens
14.3.2 GE
14.3.3 Dunlee(Philips)
14.3.4 Varex imaging
14.3.5 IAE
14.3.6 Richardson Healthcare
14.3.7 Chronos imaging
14.3.8 Canon
14.3.9 RCAN
14.3.10 Kunshan Yiyuan Medical Technology Co., Ltd.
14.3.11 Siemens
