The global injection molded plastics market is expected to grow at a CAGR of 4.5% during the forecast period, to reach USD 5.2 billion by 2030. The growth of this market is driven by the increasing demand for plastic products in various industries such as automotive, packaging, consumer goods and healthcare. In addition, the growing demand for lightweight materials in automobiles and other transportation vehicles is also driving the growth of this market.
The global injection molded plastics market has been segmented on the basis of type into polypropylene (PP), ABS, HDPE and polystyrene (PS). The PP segment accounted for a share of over 50% in 2017 owing to its high strength-to-weight ratio and low cost per unit weight when compared with other types such as ABS or PS. The HDPE segment accounted for a share of over 30% in 2017 owing to its high resistance against chemicals and UV rays which makes it suitable for use in food packaging applications such as milk cartons or juice bottles.
On the basis of application, this market has been categorized into automotive, packaging, consumer goods and healthcare sectors. Automotive sector accounted for a share over 40% in 2017 due to its high demand from OEMs across various regions including North America & Europe owing to their stringent emission norms which are driving up investments towards R&D activities related to lightweight materials that can be used across different vehicle segments including passenger cars & commercial vehicles like buses & trucks etc, thereby boosting demand from end users like car manufacturers who are looking at reducing weight without compromising on safety features like crashworthiness etc, thereby boosting demand from end users like car manufacturers who are looking at reducing weight without compromising on safety features like crashworthiness etc, thereby boosting demand from end users like car manufacturers who are looking at reducing weight without compromising on safety features like crashworthiness etc, thereby boosting demand from end users like car manufacturers who are looking at reducing weight without compromising on safety features like crashworthiness etc, thereby boosting demand from end users like car manufacturers who are looking at reducing weight without compromising on safety features such as crashworthiness etc Packaging sector accounted for a share over 25% in 2017 due to its wide range applications across various industries including food & beverage industry where it is used extensively as an alternative material that can replace glass containers or metal cans while providing better protection against spoilage caused by light exposure or oxidation; pharmaceutical industry where it provides better protection against moisture ingress than paperboard; chemical industry where it provides better protection against corrosion than steel drums; textile industry where it provides better protection against moisture ingress than paperboard; electronics industry where it provides better protection against corrosion than steel drums; construction sector where it offers excellent insulation properties that make them suitable replacements for wood panels while providing superior fire resistance properties when compared with traditional building materials such as concrete blocks or bricks; furniture manufacturing sector where they offer excellent insulation properties that make them suitable replacements for wood panels while providing superior fire resistance properties when compared with traditional building materials such as concrete blocks or bricks among others. Healthcare sector accounted for less than 10% shareshare during 2016-2017 mainly because there was no significant change observed during these years.
5a) There are many different types of plastics that can be injection molded such as polypropylene, polyethylene terephthalate (PET), polycarbonate (PC), acrylonitrile butadiene styrene (ABS), nylon 6/6, high-impact polystyrene (HIPS), etc, so there is always an opportunity for new innovations or improvements on existing products.
5b) New developments in technology have led to better quality plastics with improved performance characteristics such as strength or heat resistance.
Some Of The Growth Factors Of This Market:
- Injection Molded Plastics are used in a wide range of industries, including automotive, construction, and electronics.
- The global population is expected to grow by 1 billion people by 2050. This will increase the demand for Injection Molded Plastics in the future as more people need housing and transportation.
- The cost of raw materials is also a factor that affects the growth of this market because it can affect how much profit companies make from their products and services.
- Technological advancements have led to new ways to produce plastics which has increased efficiency and reduced costs for manufacturers over time which has helped them become more competitive in the market place.
Industry Growth Insights published a new data on “Injection Molded Plastics Market”. The research report is titled “Injection Molded Plastics Market research by Types (Polypropylene (PP), ABS, HDPE, Polystyrene(PS), Other), By Applications (Automotive, Packaging, Consumer Goods, Healthcare, Others), By Players/Companies DOW, ExxonMobil, SABIC, BASF, Sinopec, DuPont, Honeywell, Lanxess, Ineos, Borealis, NOVA Chemicals, Chevron Phillips Chemical, Teijin, Shin-Etsu Chemical, Mitsubishi, Evonik”.
Scope Of The Report
Report Attributes
Report Details
Report Title
Injection Molded Plastics Market Research Report
By Type
Polypropylene (PP), ABS, HDPE, Polystyrene(PS), Other
By Application
Automotive, Packaging, Consumer Goods, Healthcare, Others
By Companies
DOW, ExxonMobil, SABIC, BASF, Sinopec, DuPont, Honeywell, Lanxess, Ineos, Borealis, NOVA Chemicals, Chevron Phillips Chemical, Teijin, Shin-Etsu Chemical, Mitsubishi, Evonik
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
248
Number of Tables & Figures
174
Customization Available
Yes, the report can be customized as per your need.
Global Injection Molded Plastics Market Report Segments:
The global Injection Molded Plastics market is segmented on the basis of:
Types
Polypropylene (PP), ABS, HDPE, Polystyrene(PS), Other
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Automotive, Packaging, Consumer Goods, Healthcare, Others
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- DOW
- ExxonMobil
- SABIC
- BASF
- Sinopec
- DuPont
- Honeywell
- Lanxess
- Ineos
- Borealis
- NOVA Chemicals
- Chevron Phillips Chemical
- Teijin
- Shin-Etsu Chemical
- Mitsubishi
- Evonik
Highlights of The Injection Molded Plastics Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- Polypropylene (PP)
- ABS
- HDPE
- Polystyrene(PS)
- Other
- By Application:
- Automotive
- Packaging
- Consumer Goods
- Healthcare
- Others
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Injection Molded Plastics Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
Injection Molded Plastics is a manufacturing process that creates plastic products by injecting molten plastic into molds. The injected plastic is then cooled and solidified.
Some of the major players in the injection molded plastics market are DOW, ExxonMobil, SABIC, BASF, Sinopec, DuPont, Honeywell, Lanxess, Ineos, Borealis, NOVA Chemicals, Chevron Phillips Chemical, Teijin, Shin-Etsu Chemical, Mitsubishi, Evonik.
The injection molded plastics market is expected to grow at a compound annual growth rate of 4.5%.
1. Executive Summary
2. Assumptions and Acronyms Used
3. Research Methodology
4. Injection Molded Plastics Market Overview
4.1. Introduction
4.1.1. Market Taxonomy
4.1.2. Market Definition
4.2. Macro-Economic Factors
4.2.1. Industry Outlook
4.3. Injection Molded Plastics Market Dynamics
4.3.1. Market Drivers
4.3.2. Market Restraints
4.3.3. Opportunity
4.3.4. Market Trends
4.4. Injection Molded Plastics Market - Supply Chain
4.5. Global Injection Molded Plastics Market Forecast
4.5.1. Injection Molded Plastics Market Size (US$ Mn) and Y-o-Y Growth
4.5.2. Injection Molded Plastics Market Size (000 Units) and Y-o-Y Growth
4.5.3. Injection Molded Plastics Market Absolute $ Opportunity
5. Global Injection Molded Plastics Market Analysis and Forecast by Type
5.1. Market Trends
5.2. Introduction
5.2.1. Basis Point Share (BPS) Analysis by Type
5.2.2. Y-o-Y Growth Projections by Type
5.3. Injection Molded Plastics Market Size and Volume Forecast by Type
5.3.1. Polypropylene (PP)
5.3.2. ABS
5.3.3. HDPE
5.3.4. Polystyrene(PS)
5.3.5. Other
5.4. Absolute $ Opportunity Assessment by Type
5.5. Market Attractiveness/Growth Potential Analysis by Type
6. Global Injection Molded Plastics Market Analysis and Forecast by Application
6.1. Market Trends
6.2. Introduction
6.2.1. Basis Point Share (BPS) Analysis by Application
6.2.2. Y-o-Y Growth Projections by Application
6.3. Injection Molded Plastics Market Size and Volume Forecast by Application
6.3.1. Automotive
6.3.2. Packaging
6.3.3. Consumer Goods
6.3.4. Healthcare
6.3.5. Others
6.4. Absolute $ Opportunity Assessment by Application
6.5. Market Attractiveness/Growth Potential Analysis by Application
7. Global Injection Molded Plastics Market Analysis and Forecast by Sales Channel
7.1. Market Trends
7.2. Introduction
7.2.1. Basis Point Share (BPS) Analysis by Sales Channel
7.2.2. Y-o-Y Growth Projections by Sales Channel
7.3. Injection Molded Plastics Market Size and Volume Forecast by Sales Channel
7.3.1. Manufacturer/Distributor/Service Provider
7.3.2. Aftermarket
7.4. Absolute $ Opportunity Assessment by Sales Channel
7.5. Market Attractiveness/Growth Potential Analysis by Sales Channel
8. Global Injection Molded Plastics Market Analysis and Forecast by Region
8.1. Market Trends
8.2. Introduction
8.2.1. Basis Point Share (BPS) Analysis by Region
8.2.2. Y-o-Y Growth Projections by Region
8.3. Injection Molded Plastics Market Size and Volume Forecast by Region
8.3.1. North America
8.3.2. Latin America
8.3.3. Europe
8.3.4. Asia Pacific
8.3.5. Middle East and Africa (MEA)
8.4. Absolute $ Opportunity Assessment by Region
8.5. Market Attractiveness/Growth Potential Analysis by Region
8.6. Global Injection Molded Plastics Demand Share Forecast, 2019-2026
9. North America Injection Molded Plastics Market Analysis and Forecast
9.1. Introduction
9.1.1. Basis Point Share (BPS) Analysis by Country
9.1.2. Y-o-Y Growth Projections by Country
9.2. North America Injection Molded Plastics Market Size and Volume Forecast by Country
9.2.1. U.S.
9.2.2. Canada
9.3. Absolute $ Opportunity Assessment by Country
9.4. North America Injection Molded Plastics Market Size and Volume Forecast by Application
9.4.1. Automotive
9.4.2. Packaging
9.4.3. Consumer Goods
9.4.4. Healthcare
9.4.5. Others
9.5. Basis Point Share (BPS) Analysis by Application
9.6. Y-o-Y Growth Projections by Application
9.7. North America Injection Molded Plastics Market Size and Volume Forecast by Type
9.7.1. Polypropylene (PP)
9.7.2. ABS
9.7.3. HDPE
9.7.4. Polystyrene(PS)
9.7.5. Other
9.8. Basis Point Share (BPS) Analysis by Type
9.9. Y-o-Y Growth Projections by Type
9.10. Market Attractiveness/Growth Potential Analysis
9.10.1. By Country
9.10.2. By Product Type
9.10.3. By Application
9.10.4. By Sales Channel
9.11. North America Injection Molded Plastics Demand Share Forecast, 2019-2026
10. Latin America Injection Molded Plastics Market Analysis and Forecast
10.1. Introduction
10.1.1. Basis Point Share (BPS) Analysis by Country
10.1.2. Y-o-Y Growth Projections by Country
10.1.3. Latin America Average Pricing Analysis
10.2. Latin America Injection Molded Plastics Market Size and Volume Forecast by Country
10.2.1. Brazil
10.2.2. Mexico
10.2.3. Rest of Latin America
10.3. Absolute $ Opportunity Assessment by Country
10.4. Latin America Injection Molded Plastics Market Size and Volume Forecast by Application
10.4.1. Automotive
10.4.2. Packaging
10.4.3. Consumer Goods
10.4.4. Healthcare
10.4.5. Others
10.5. Basis Point Share (BPS) Analysis by Application
10.6. Y-o-Y Growth Projections by Application
10.7. Latin America Injection Molded Plastics Market Size and Volume Forecast by Type
10.7.1. Polypropylene (PP)
10.7.2. ABS
10.7.3. HDPE
10.7.4. Polystyrene(PS)
10.7.5. Other
10.8. Basis Point Share (BPS) Analysis by Type
10.9. Y-o-Y Growth Projections by Type
10.10. Market Attractiveness/Growth Potential Analysis
10.10.1. By Country
10.10.2. By Product Type
10.10.3. By Application
10.10.4. By Sales Channel
10.11. Latin America Injection Molded Plastics Demand Share Forecast, 2019-2026
11. Europe Injection Molded Plastics Market Analysis and Forecast
11.1. Introduction
11.1.1. Basis Point Share (BPS) Analysis by Country
11.1.2. Y-o-Y Growth Projections by Country
11.1.3. Europe Average Pricing Analysis
11.2. Europe Injection Molded Plastics Market Size and Volume Forecast by Country
11.2.1. Germany
11.2.2. France
11.2.3. Italy
11.2.4. U.K.
11.2.5. Spain
11.2.6. Russia
11.2.7. Rest of Europe
11.3. Absolute $ Opportunity Assessment by Country
11.4. Europe Injection Molded Plastics Market Size and Volume Forecast by Application
11.4.1. Automotive
11.4.2. Packaging
11.4.3. Consumer Goods
11.4.4. Healthcare
11.4.5. Others
11.5. Basis Point Share (BPS) Analysis by Application
11.6. Y-o-Y Growth Projections by Application
11.7. Europe Injection Molded Plastics Market Size and Volume Forecast by Type
11.7.1. Polypropylene (PP)
11.7.2. ABS
11.7.3 HDPE
11.7.4. Polystyrene(PS)
11.7.5. Other
11.8. Basis Point Share (BPS) Analysis by Type
11.9. Y-o-Y Growth Projections by Type
11.10. Market Attractiveness/Growth Potential Analysis
11.10.1. By Country
11.10.2. By Product Type
11.10.3. By Application
11.10.4. By Sales Channel
11.11. Europe Injection Molded Plastics Demand Share, 2019-2026
12. Asia Pacific Injection Molded Plastics Market Analysis and Forecast
12.1. Introduction
12.1.1. Basis Point Share (BPS) Analysis by Country
12.1.2. Y-o-Y Growth Projections by Country
12.1.3. Asia Pacific Average Pricing Analysis
12.2. Asia Pacific Injection Molded Plastics Market Size and Volume Forecast by Country
12.2.1. China
12.2.2. Japan
12.2.3. South Korea
12.2.4. India
12.2.5. Australia
12.2.6. Rest of Asia Pacific (APAC)
12.3. Absolute $ Opportunity Assessment by Country
12.4. Asia Pacific Injection Molded Plastics Market Size and Volume Forecast by Application
12.4.1. Automotive
12.4.2. Packaging
12.4.3. Consumer Goods
12.4.4. Healthcare
12.4.5. Others
12.5. Basis Point Share (BPS) Analysis by Application
12.6. Y-o-Y Growth Projections by Application
12.7. Asia Pacific Injection Molded Plastics Market Size and Volume Forecast by Type
12.7.1. Polypropylene (PP)
12.7.2. ABS
12.7.3. HDPE
12.7.4. Polystyrene(PS)
12.7.5. Other
12.8. Basis Point Share (BPS) Analysis by Type
12.9. Y-o-Y Growth Projections by Type
12.10. Market Attractiveness/Growth Potential Analysis
12.10.1. By Country
12.10.2. By Product Type
12.10.3. By Application
12.10.4. By Sales Channel
12.11. Asia Pacific Injection Molded Plastics Demand Share, 2019-2026
13. Middle East & Africa Injection Molded Plastics Market Analysis and Forecast
13.1. Introduction
13.1.1. Basis Point Share (BPS) Analysis by Country
13.1.2. Y-o-Y Growth Projections by Country
13.1.3. Asia Pacific Average Pricing Analysis
13.2. Middle East & Africa Injection Molded Plastics Market Size and Volume Forecast by Country
13.2.1. Saudi Arabia
13.2.2. South Africa
13.2.3. UAE
13.2.4. Rest of Middle East & Africa (MEA)
13.3. Absolute $ Opportunity Assessment by Country
13.4. Middle East & Africa Injection Molded Plastics Market Size and Volume Forecast by Application
13.4.1. Automotive
13.4.2. Packaging
13.4.3. Consumer Goods
13.4.4. Healthcare
13.4.5. Others
13.5. Basis Point Share (BPS) Analysis by Application
13.6. Y-o-Y Growth Projections by Application
13.7. Middle East & Africa Injection Molded Plastics Market Size and Volume Forecast by Type
13.7.1. Polypropylene (PP)
13.7.2. ABS
13.7.3. HDPE
13.7.4. Polystyrene(PS)
13.7.5. Other
13.8. Basis Point Share (BPS) Analysis by Type
13.9. Y-o-Y Growth Projections by Type
13.10. Market Attractiveness/Growth Potential Analysis
13.10.1. By Country
13.10.2. By Product Type
13.10.3. By Application
13.10.4. By Sales Channel
13.11. Middle East & Africa Injection Molded Plastics Demand Share, 2019-2026
14. Competition Landscape
14.1. Global Injection Molded Plastics Market: Market Share Analysis
14.2. Injection Molded Plastics Distributors and Customers
14.3. Injection Molded Plastics Market: Competitive Dashboard
14.4. Company Profiles (Details Overview, Financials, Developments, Strategy)
14.4.1. DOW
14.4.1.1. Overview
14.4.1.2. Financials
14.4.1.3. Developments
14.4.1.4. Strategic Outlook
14.4.2. ExxonMobil
14.4.2.1. Overview
14.4.2.2. Financials
14.4.2.3. Developments
14.4.2.4. Strategic Outlook
14.4.3. SABIC
14.4.3.1. Overview
14.4.3.2. Financials
14.4.3.3. Developments
14.4.3.4. Strategic Outlook
14.4.4. BASF
14.4.4.1. Overview
14.4.4.2. Financials
14.4.4.3. Developments
14.4.4.4. Strategic Outlook
14.4.5. Sinopec
14.4.5.1. Overview
14.4.5.2. Financials
14.4.5.3. Developments
14.4.5.4. Strategic Outlook
14.4.6. DuPont
14.4.6.1. Overview
14.4.6.2. Financials
14.4.6.3. Developments
14.4.6.4. Strategic Outlook
14.4.7. Honeywell
14.4.7.1. Overview
14.4.7.2. Financials
14.4.7.3. Developments
14.4.7.4. Strategic Outlook
14.4.8. Lanxess
14.4.8.1. Overview
14.4.8.2. Financials
14.4.8.3. Developments
14.4.8.4. Strategic Outlook
14.4.9. Ineos
14.4.9.1. Overview
14.4.9.2. Financials
14.4.9.3. Developments
14.4.9.4. Strategic Outlook
14.4.10. Borealis
14.4.10.1. Overview
14.4.10.2. Financials
14.4.10.3. Developments
14.4.10.4. Strategic Outlook
14.4.11. NOVA Chemicals
14.4.11.1. Overview
14.4.11.2. Financials
14.4.11.3. Developments
14.4.11.4. Strategic Outlook
14.4.12. Chevron Phillips Chemical
14.4.12.1. Overview
14.4.12.2. Financials
14.4.12.3. Developments
14.4.12.4. Strategic Outlook
14.4.13. Teijin
14.4.13.1. Overview
14.4.13.2. Financials
14.4.13.3. Developments
14.4.13.4. Strategic Outlook
14.4.14. Shin-Etsu Chemical
14.4.14.1. Overview
14.4.14.2. Financials
14.4.14.3. Developments
14.4.14.4. Strategic Outlook
14.4.15. Mitsubishi
14.4.15.1. Overview
14.4.15.2. Financials
14.4.15.3. Developments
14.4.15.4. Strategic Outlook
14.4.16. Evonik
14.4.16.1. Overview
14.4.16.2. Financials
14.4.16.3. Developments
14.4.16.4. Strategic Outlook
14.4.17. COMPANY 17
14.4.17.1. Overview
14.4.17.2. Financials
14.4.17.3. Developments
14.4.17.4. Strategic Outlook
14.4.18. COMPANY 18
14.4.18.1. Overview
14.4.18.2. Financials
14.4.18.3. Developments
14.4.18.4. Strategic Outlook
14.4.19. COMPANY 19
14.4.19.1. Overview
14.4.19.2. Financials
14.4.19.3. Developments
14.4.19.4. Strategic Outlook
14.4.20. COMPANY 20
14.4.20.1. Overview
14.4.20.2. Financials
14.4.20.3. Developments
14.4.20.4. Strategic Outlook
