The global insulators market is expected to grow at a CAGR of 4.5% during the forecast period, from 2021 to 2030. The growth of the market can be attributed to the increasing demand for power generation and transmission infrastructure in emerging economies such as India and China. The high voltage line segment is expected to dominate the global insulators market during the forecast period, due to its higher demand in developing countries such as India and China.
Porcelain Insulators: Porcelain insulators are used for low voltage lines, substations, power plants, and high voltage lines. They are made up of porcelain material that has been fired at a very high temperature so that it becomes hard enough not to break when subjected to mechanical stress or heat. Porcelain insulators are used in low-voltage applications because they have a lower dielectric strength than other types of insulation materials such as glass or composite insulation materials; this means they can withstand less electric current before breaking down.
Composite Insulator: Composite insulation materials are made up of two or more layers with different properties that work together for better performance than either layer alone would provide on its own; these layers may include paper, plastic film, metal foil or metal mesh with an air space between them which provides thermal insulation properties while also providing electrical isolation properties by preventing direct contact between conductors on opposite sides of the material (i.e., one side is grounded).
Some Of The Growth Factors Of This Market:
- The demand for insulation is expected to grow as the world's population increases and more people move into urban areas, which are typically warmer than rural areas.
- Insulation is also used in buildings to reduce energy consumption and lower utility bills.
- The use of insulation in buildings has been increasing due to the increased awareness of its benefits, such as reducing energy consumption and lowering utility bills, as well as its ability to improve indoor air quality by preventing moisture from entering the building envelope through cracks or gaps in construction materials or through leaks around windows and doors.
- Insulation can be made from a variety of materials including fiberglass, polystyrene foam, cellulose fibers (such as cotton), mineral wool (such as rock wool), polyurethane foam (such as extruded polystyrene) or other types of foam insulation that are blown into place with an air compressor; these materials have different properties that make them suitable for different applications such as thermal resistance or sound absorption properties; some insulators may also contain fire retardants which can help prevent fires from spreading inside a building envelope during a fire event; this type of insulation is often referred to by the generic term "fire-resistant" insulation because it resists heat transfer better than other types of insulators do when exposed to high temperatures caused by fire events; this type was developed after World War II when many homes were destroyed by fires caused by incendiary bombs dropped on cities during wartime bombing raids.
- The cost effectiveness of insulating varies depending on factors such as climate zone, construction type and material used.
Industry Growth Insights published a new data on “Insulators Market”. The research report is titled “Insulators Market research by Types (Porcelain Insulators, Composite Insulators, Glass Insulator), By Applications (Low Voltage Line, High Voltage Line, Power Plants, Substations, Others), By Players/Companies Lapp Insulators, PPC Insulators, NGK-Locke, TE, GE, MR, ABB, Hubbell Incorporated, Victor Insulators, SIEMENS, MacLean Power Systems, INAEL Elactrical, Meister International”.
Scope Of The Report
Report Attributes
Report Details
Report Title
Insulators Market Research Report
By Type
Porcelain Insulators, Composite Insulators, Glass Insulator
By Application
Low Voltage Line, High Voltage Line, Power Plants, Substations, Others
By Companies
Lapp Insulators, PPC Insulators, NGK-Locke, TE, GE, MR, ABB, Hubbell Incorporated, Victor Insulators, SIEMENS, MacLean Power Systems, INAEL Elactrical, Meister International
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
243
Number of Tables & Figures
171
Customization Available
Yes, the report can be customized as per your need.
Global Insulators Market Report Segments:
The global Insulators market is segmented on the basis of:
Types
Porcelain Insulators, Composite Insulators, Glass Insulator
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Low Voltage Line, High Voltage Line, Power Plants, Substations, Others
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- Lapp Insulators
- PPC Insulators
- NGK-Locke
- TE
- GE
- MR
- ABB
- Hubbell Incorporated
- Victor Insulators
- SIEMENS
- MacLean Power Systems
- INAEL Elactrical
- Meister International
Highlights of The Insulators Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- Porcelain Insulators
- Composite Insulators
- Glass Insulator
- By Application:
- Low Voltage Line
- High Voltage Line
- Power Plants, Substations
- Others
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Insulators Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
Insulators are materials that do not allow electricity to flow through them easily. This means that they can protect electrical components from damage and help to keep the overall system running smoothly.
Some of the major players in the insulators market are Lapp Insulators, PPC Insulators, NGK-Locke, TE, GE, MR, ABB, Hubbell Incorporated, Victor Insulators, SIEMENS, MacLean Power Systems, INAEL Elactrical, Meister International.
The insulators market is expected to grow at a compound annual growth rate of 4.5%.
1. Executive Summary
2. Assumptions and Acronyms Used
3. Research Methodology
4. Insulators Market Overview
4.1. Introduction
4.1.1. Market Taxonomy
4.1.2. Market Definition
4.2. Macro-Economic Factors
4.2.1. Industry Outlook
4.3. Insulators Market Dynamics
4.3.1. Market Drivers
4.3.2. Market Restraints
4.3.3. Opportunity
4.3.4. Market Trends
4.4. Insulators Market - Supply Chain
4.5. Global Insulators Market Forecast
4.5.1. Insulators Market Size (US$ Mn) and Y-o-Y Growth
4.5.2. Insulators Market Size (000 Units) and Y-o-Y Growth
4.5.3. Insulators Market Absolute $ Opportunity
5. Global Insulators Market Analysis and Forecast by Type
5.1. Market Trends
5.2. Introduction
5.2.1. Basis Point Share (BPS) Analysis by Type
5.2.2. Y-o-Y Growth Projections by Type
5.3. Insulators Market Size and Volume Forecast by Type
5.3.1. Porcelain Insulators
5.3.2. Composite Insulators
5.3.3. Glass Insulator
5.4. Absolute $ Opportunity Assessment by Type
5.5. Market Attractiveness/Growth Potential Analysis by Type
6. Global Insulators Market Analysis and Forecast by Application
6.1. Market Trends
6.2. Introduction
6.2.1. Basis Point Share (BPS) Analysis by Application
6.2.2. Y-o-Y Growth Projections by Application
6.3. Insulators Market Size and Volume Forecast by Application
6.3.1. Low Voltage Line
6.3.2. High Voltage Line
6.3.3. Power Plants, Substations
6.3.4. Others
6.4. Absolute $ Opportunity Assessment by Application
6.5. Market Attractiveness/Growth Potential Analysis by Application
7. Global Insulators Market Analysis and Forecast by Sales Channel
7.1. Market Trends
7.2. Introduction
7.2.1. Basis Point Share (BPS) Analysis by Sales Channel
7.2.2. Y-o-Y Growth Projections by Sales Channel
7.3. Insulators Market Size and Volume Forecast by Sales Channel
7.3.1. Manufacturer/Distributor/Service Provider
7.3.2. Aftermarket
7.4. Absolute $ Opportunity Assessment by Sales Channel
7.5. Market Attractiveness/Growth Potential Analysis by Sales Channel
8. Global Insulators Market Analysis and Forecast by Region
8.1. Market Trends
8.2. Introduction
8.2.1. Basis Point Share (BPS) Analysis by Region
8.2.2. Y-o-Y Growth Projections by Region
8.3. Insulators Market Size and Volume Forecast by Region
8.3.1. North America
8.3.2. Latin America
8.3.3. Europe
8.3.4. Asia Pacific
8.3.5. Middle East and Africa (MEA)
8.4. Absolute $ Opportunity Assessment by Region
8.5. Market Attractiveness/Growth Potential Analysis by Region
8.6. Global Insulators Demand Share Forecast, 2019-2026
9. North America Insulators Market Analysis and Forecast
9.1. Introduction
9.1.1. Basis Point Share (BPS) Analysis by Country
9.1.2. Y-o-Y Growth Projections by Country
9.2. North America Insulators Market Size and Volume Forecast by Country
9.2.1. U.S.
9.2.2. Canada
9.3. Absolute $ Opportunity Assessment by Country
9.4. North America Insulators Market Size and Volume Forecast by Application
9.4.1. Low Voltage Line
9.4.2. High Voltage Line
9.4.3. Power Plants, Substations
9.4.4. Others
9.5. Basis Point Share (BPS) Analysis by Application
9.6. Y-o-Y Growth Projections by Application
9.7. North America Insulators Market Size and Volume Forecast by Type
9.7.1. Porcelain Insulators
9.7.2. Composite Insulators
9.7.3. Glass Insulator
9.8. Basis Point Share (BPS) Analysis by Type
9.9. Y-o-Y Growth Projections by Type
9.10. Market Attractiveness/Growth Potential Analysis
9.10.1. By Country
9.10.2. By Product Type
9.10.3. By Application
9.10.4. By Sales Channel
9.11. North America Insulators Demand Share Forecast, 2019-2026
10. Latin America Insulators Market Analysis and Forecast
10.1. Introduction
10.1.1. Basis Point Share (BPS) Analysis by Country
10.1.2. Y-o-Y Growth Projections by Country
10.1.3. Latin America Average Pricing Analysis
10.2. Latin America Insulators Market Size and Volume Forecast by Country
10.2.1. Brazil
10.2.2. Mexico
10.2.3. Rest of Latin America
10.3. Absolute $ Opportunity Assessment by Country
10.4. Latin America Insulators Market Size and Volume Forecast by Application
10.4.1. Low Voltage Line
10.4.2. High Voltage Line
10.4.3. Power Plants, Substations
10.4.4. Others
10.5. Basis Point Share (BPS) Analysis by Application
10.6. Y-o-Y Growth Projections by Application
10.7. Latin America Insulators Market Size and Volume Forecast by Type
10.7.1. Porcelain Insulators
10.7.2. Composite Insulators
10.7.3. Glass Insulator
10.8. Basis Point Share (BPS) Analysis by Type
10.9. Y-o-Y Growth Projections by Type
10.10. Market Attractiveness/Growth Potential Analysis
10.10.1. By Country
10.10.2. By Product Type
10.10.3. By Application
10.10.4. By Sales Channel
10.11. Latin America Insulators Demand Share Forecast, 2019-2026
11. Europe Insulators Market Analysis and Forecast
11.1. Introduction
11.1.1. Basis Point Share (BPS) Analysis by Country
11.1.2. Y-o-Y Growth Projections by Country
11.1.3. Europe Average Pricing Analysis
11.2. Europe Insulators Market Size and Volume Forecast by Country
11.2.1. Germany
11.2.2. France
11.2.3. Italy
11.2.4. U.K.
11.2.5. Spain
11.2.6. Russia
11.2.7. Rest of Europe
11.3. Absolute $ Opportunity Assessment by Country
11.4. Europe Insulators Market Size and Volume Forecast by Application
11.4.1. Low Voltage Line
11.4.2. High Voltage Line
11.4.3. Power Plants, Substations
11.4.4. Others
11.5. Basis Point Share (BPS) Analysis by Application
11.6. Y-o-Y Growth Projections by Application
11.7. Europe Insulators Market Size and Volume Forecast by Type
11.7.1. Porcelain Insulators
11.7.2. Composite Insulators
11.7.3. Glass Insulator
11.8. Basis Point Share (BPS) Analysis by Type
11.9. Y-o-Y Growth Projections by Type
11.0. Market Attractiveness/Growth Potential Analysis
11.10.1. By Country
11.10.2. By Product Type
11.10.3. By Application
11.10.4. By Sales Channel
11.11. Europe Insulators Demand Share, 2019-2026
12. Asia Pacific Insulators Market Analysis and Forecast
12.1. Introduction
12.1.1. Basis Point Share (BPS) Analysis by Country
12.1.2. Y-o-Y Growth Projections by Country
12.1.3. Asia Pacific Average Pricing Analysis
12.2. Asia Pacific Insulators Market Size and Volume Forecast by Country
12.2.1. China
12.2.2. Japan
12.2.3. South Korea
12.2.4. India
12.2.5. Australia
12.2.6. Rest of Asia Pacific (APAC)
12.3. Absolute $ Opportunity Assessment by Country
12.4. Asia Pacific Insulators Market Size and Volume Forecast by Application
12.4.1. Low Voltage Line
12.4.2. High Voltage Line
12.4.3. Power Plants, Substations
12.4.4. Others
12.5. Basis Point Share (BPS) Analysis by Application
12.6. Y-o-Y Growth Projections by Application
12.7. Asia Pacific Insulators Market Size and Volume Forecast by Type
12.7.1. Porcelain Insulators
12.7.2. Composite Insulators
12.7.3. Glass Insulator
12.8. Basis Point Share (BPS) Analysis by Type
12.9. Y-o-Y Growth Projections by Type
12.10. Market Attractiveness/Growth Potential Analysis
12.10.1. By Country
12.10.2. By Product Type
12.10.3. By Application
12.10.4. By Sales Channel
12.11. Asia Pacific Insulators Demand Share, 2019-2026
13. Middle East & Africa Insulators Market Analysis and Forecast
13.1. Introduction
13.1.1. Basis Point Share (BPS) Analysis by Country
13.1.2. Y-o-Y Growth Projections by Country
13.1.3. Asia Pacific Average Pricing Analysis
13.2. Middle East & Africa Insulators Market Size and Volume Forecast by Country
13.2.1. Saudi Arabia
13.2.2. South Africa
13.2.3. UAE
13.2.4. Rest of Middle East & Africa (MEA)
13.3. Absolute $ Opportunity Assessment by Country
13.4. Middle East & Africa Insulators Market Size and Volume Forecast by Application
13.4.1. Low Voltage Line
13.4.2. High Voltage Line
13.4.3. Power Plants, Substations
13.4.4. Others
13.5. Basis Point Share (BPS) Analysis by Application
13.6. Y-o-Y Growth Projections by Application
13.7. Middle East & Africa Insulators Market Size and Volume Forecast by Type
13.7.1. Porcelain Insulators
13.7.2. Composite Insulators
13.7.3. Glass Insulator
13.8. Basis Point Share (BPS) Analysis by Type
13.9. Y-o-Y Growth Projections by Type
13.10. Market Attractiveness/Growth Potential Analysis
13.10.1. By Country
13.10.2. By Product Type
13.10.3. By Application
13.10.4. By Sales Channel
13.11. Middle East & Africa Insulators Demand Share, 2019-2026
14. Competition Landscape
14.1. Global Insulators Market: Market Share Analysis
14.2. Insulators Distributors and Customers
14.3. Insulators Market: Competitive Dashboard
14.4. Company Profiles (Details Overview, Financials, Developments, Strategy)
14.4.1. Lapp Insulators
14.4.1.1. Overview
14.4.1.2. Financials
14.4.1.3. Developments
14.4.1.4. Strategic Outlook
14.4.2. PPC Insulators
14.4.2.1. Overview
14.4.2.2. Financials
14.4.2.3. Developments
14.4.2.4. Strategic Outlook
14.4.3. NGK-Locke
14.4.3.1. Overview
14.4.3.2. Financials
14.4.3.3. Developments
14.4.3.4. Strategic Outlook
14.4.4. TE
14.4.4.1. Overview
14.4.4.2. Financials
14.4.4.3. Developments
14.4.4.4. Strategic Outlook
14.4.5. GE
14.4.5.1. Overview
14.4.5.2. Financials
14.4.5.3. Developments
14.4.5.4. Strategic Outlook
14.4.6. MR
14.4.6.1. Overview
14.4.6.2. Financials
14.4.6.3. Developments
14.4.6.4. Strategic Outlook
14.4.7. ABB
14.4.7.1. Overview
14.4.7.2. Financials
14.4.7.3. Developments
14.4.7.4. Strategic Outlook
14.4.8. Hubbell Incorporated
14.4.8.1. Overview
14.4.8.2. Financials
14.4.8.3. Developments
14.4.8.4. Strategic Outlook
14.4.9. Victor Insulators
14.4.9.1. Overview
14.4.9.2. Financials
14.4.9.3. Developments
14.4.9.4. Strategic Outlook
14.4.10. SIEMENS
14.4.10.1. Overview
14.4.10.2. Financials
14.4.10.3. Developments
14.4.10.4. Strategic Outlook
14.4.11. MacLean Power Systems
14.4.11.1. Overview
14.4.11.2. Financials
14.4.11.3. Developments
14.4.11.4. Strategic Outlook
14.4.12. INAEL Elactrical
14.4.12.1. Overview
14.4.12.2. Financials
14.4.12.3. Developments
14.4.12.4. Strategic Outlook
14.4.13. Meister International
14.4.13.1. Overview
14.4.13.2. Financials
14.4.13.3. Developments
14.4.13.4. Strategic Outlook
14.4.14. COMPANY 14
14.4.14.1. Overview
14.4.14.2. Financials
14.4.14.3. Developments
14.4.14.4. Strategic Outlook
14.4.15. COMPANY 15
14.4.15.1. Overview
14.4.15.2. Financials
14.4.15.3. Developments
14.4.15.4. Strategic Outlook
14.4.16. COMPANY 16
14.4.16.1. Overview
14.4.16.2. Financials
14.4.16.3. Developments
14.4.16.4. Strategic Outlook
14.4.17. COMPANY 17
14.4.17.1. Overview
14.4.17.2. Financials
14.4.17.3. Developments
14.4.17.4. Strategic Outlook
14.4.18. COMPANY 18
14.4.18.1. Overview
14.4.18.2. Financials
14.4.18.3. Developments
14.4.18.4. Strategic Outlook
14.4.19. COMPANY 19
14.4.19.1. Overview
14.4.19.2. Financials
14.4.19.3. Developments
14.4.19.4. Strategic Outlook
14.4.20. COMPANY 20
14.4.20.1. Overview
14.4.20.2. Financials
14.4.20.3. Developments
14.4.20.4. Strategic Outlook
