Market Overview:
The global knife gate valves market is expected to grow at a CAGR of 5.5% from 2018 to 2030. The market is segmented by type, application, and region. The type segment is further divided into pneumatic knife gate valve, electric knife gate valve, manual knife gate valve, and other types. The application segment is divided into pulp and paper, wastewater treatment, oil and gas production and processing industry (Mining), power generation industry (thermal power plants), chemical industry (petrochemical plants), food processing industry (fruit juice factories), water supply systems for residential areas or public places such as hospitals or schools) others). In terms of value share in 2017 manual knife gate valves accounted for the majority share of the global Knife Gate Valves Market followed by electric knives gates valves . However , in terms of CAGR from 2018-2030 pneumatic knives gates valves are projected to be the fastest growing product segments with a CAGR of 6%. This can be attributed to factors such as easy installation & operation , low maintenance cost & long life cycle . The pulp and paper sector held an important share in terms of applications accounting for 29%of the market share in 2017.
Product Definition:
A knife gate valve is a type of valve that uses a disk to regulate the flow of fluid through it. The disk is held in place by a shaft, and when the valve is open, the fluid flows around the shaft. Knife gate valves are often used in high-pressure applications because they can withstand more pressure than other types of valves. They are also used in applications where there is a lot of debris or sludge because their design allows them to resist clogging.
Pneumatic Knife Gate Valve:
Pneumatic Knife Gate Valve is a kind of gate valve which uses the compressed air as its operating medium. The pneumatic knife gate valve has the advantage of being able to operate at high pressure, and also has low maintenance costs due to its simple structure. It can be used in both vertical and horizontal flow applications in industrial processes such as oil & gas, chemicals, power generation industries etc.
The global Pneumatic Knife Gate Valve market size was valued at USD 1.
Electric Knife Gate Valve:
Electric knife gate valve is a device that opens and closes an electric circuit to control the flow of a liquid or gas in industrial, scientific, medical and food processing applications. It is also used as safety valves in chemical plants. The working principle of this valve is based on the diaphragm type which controls the opening and closing position by means of electrical connections to operate it.
Application Insights:
The power segment is expected to emerge as the fastest-growing application over the forecast period. The growth of this segment can be attributed to growing demand for energy resources, such as coal and wind. In addition, favorable government policies related to renewable energy are also likely to drive industry growth over the coming years.
The oil and gas sector has witnessed significant development in recent years owing to increasing production levels across various regions globally including Middle East & Africa and North America. This factor is anticipated to further fuel product demand in near future. Increasing population along with rapid urbanization has ledto increased pressure on land resources resulting in a rise in residential construction activities which will boost product consumption further during the forecast period (2017-2030). Moreover, rising industrial output coupled with strong economic growth across various regions including Asia Pacific and Latin America will also propel industry expansion during this period (2017-2030).
Regional Analysis:
Asia Pacific is expected to be the fastest-growing region with a CAGR of XX% from 2018 to 2030 owing to increasing demand for pulp and paper, wastewater treatment, oil and gas, mining applications in this region. The growing population coupled with rapid urbanization has led to an increase in the demand for food products which is anticipated would further boost the market growth over the forecast period.
The Middle East & Africa held a considerable share of global revenue in 2017 due to large proven reserves of crude oil as well as natural gas that have not yet been developed globally at great profit margins but are being extracted by countries such as Nigeria and Qatar at high economic returns thus driving industry growth across regions.
Growth Factors:
- Increasing demand for Knife Gate Valves in water and wastewater treatment applications
- Rising popularity of Knife Gate Valves in oil and gas industry
- Growing demand for Knife Gate Valves in chemical processing industries
- Increasing adoption of Knife Gate Valves in power generation sector
- Rising investments towards the development of new infrastructure
Scope Of The Report
Report Attributes
Report Details
Report Title
Knife Gate Valves Market Research Report
By Type
Pneumatic Knife Gate Valve, Electric Knife Gate Valve, Manual Knife Gate Valve, Other Types, The segment of manual knife gate valve holds a comparatively larger share in global market, which accounts for about 50%.
By Application
Pulp and Paper, Wastewater Treatment, Oil and Gas, Mining, Power, Others, The puple and paper holds an important share in terms of applications, and accounts for 29% of the market share.
By Companies
Orbinox, DeZURIK, Emerson (Pentair Valves & Controls), VAG, Bray International, Flowrox, AVK, Weir, Stafsjö Valves, Velan, ERHARD, CYL, Red Valve, Tecofi, ITT, SISTAG (WEY Valve), Davis Valve, Zhejiang Linuo Flow Control Technolog, GEFA Processtechnik, Trueline Valve Corporation, SUPERO SEIKI, Chuan Chuan Metal Valves, Tianjin Exxon Valve
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
241
Number of Tables & Figures
169
Customization Available
Yes, the report can be customized as per your need.
Global Knife Gate Valves Market Report Segments:
The global Knife Gate Valves market is segmented on the basis of:
Types
Pneumatic Knife Gate Valve, Electric Knife Gate Valve, Manual Knife Gate Valve, Other Types, The segment of manual knife gate valve holds a comparatively larger share in global market, which accounts for about 50%.
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Pulp and Paper, Wastewater Treatment, Oil and Gas, Mining, Power, Others, The puple and paper holds an important share in terms of applications, and accounts for 29% of the market share.
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- Orbinox
- DeZURIK
- Emerson (Pentair Valves & Controls)
- VAG
- Bray International
- Flowrox
- AVK
- Weir
- Stafsjö Valves
- Velan
- ERHARD
- CYL
- Red Valve
- Tecofi
- ITT
- SISTAG (WEY Valve)
- Davis Valve
- Zhejiang Linuo Flow Control Technolog
- GEFA Processtechnik
- Trueline Valve Corporation
- SUPERO SEIKI
- Chuan Chuan Metal Valves
- Tianjin Exxon Valve
Highlights of The Knife Gate Valves Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- Pneumatic Knife Gate Valve
- Electric Knife Gate Valve
- Manual Knife Gate Valve
- Other Types
- The segment of manual knife gate valve holds a comparatively larger share in global market, which accounts for about 50%.
- By Application:
- Pulp and Paper
- Wastewater Treatment
- Oil and Gas
- Mining
- Power
- Others
- The puple and paper holds an important share in terms of applications, and accounts for 29% of the market share.
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Knife Gate Valves Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
Knife Gate Valves are a type of valve used in water distribution systems to control the flow of water. They are typically installed at intersections or other points where the pressure from different parts of the system must be balanced.
Some of the major players in the knife gate valves market are Orbinox, DeZURIK, Emerson (Pentair Valves & Controls), VAG, Bray International, Flowrox, AVK, Weir, StafsjƒÂ¶ Valves, Velan, ERHARD, CYL, Red Valve, Tecofi, ITT, SISTAG (WEY Valve), Davis Valve, Zhejiang Linuo Flow Control Technolog, GEFA Processtechnik, Trueline Valve Corporation, SUPERO SEIKI, Chuan Chuan Metal Valves, Tianjin Exxon Valve.
The knife gate valves market is expected to grow at a compound annual growth rate of 5.5%.
1. Executive Summary
2. Assumptions and Acronyms Used
3. Research Methodology
4. Knife Gate Valves Market Overview
4.1. Introduction
4.1.1. Market Taxonomy
4.1.2. Market Definition
4.2. Macro-Economic Factors
4.2.1. Industry Outlook
4.3. Knife Gate Valves Market Dynamics
4.3.1. Market Drivers
4.3.2. Market Restraints
4.3.3. Opportunity
4.3.4. Market Trends
4.4. Knife Gate Valves Market - Supply Chain
4.5. Global Knife Gate Valves Market Forecast
4.5.1. Knife Gate Valves Market Size (US$ Mn) and Y-o-Y Growth
4.5.2. Knife Gate Valves Market Size (000 Units) and Y-o-Y Growth
4.5.3. Knife Gate Valves Market Absolute $ Opportunity
5. Global Knife Gate Valves Market Analysis and Forecast by Type
5.1. Market Trends
5.2. Introduction
5.2.1. Basis Point Share (BPS) Analysis by Type
5.2.2. Y-o-Y Growth Projections by Type
5.3. Knife Gate Valves Market Size and Volume Forecast by Type
5.3.1. Pneumatic Knife Gate Valve
5.3.2. Electric Knife Gate Valve
5.3.3. Manual Knife Gate Valve
5.3.4. Other Types
5.3.5. The segment of manual knife gate valve holds a comparatively larger share in global market, which accounts for about 50%.
5.4. Absolute $ Opportunity Assessment by Type
5.5. Market Attractiveness/Growth Potential Analysis by Type
6. Global Knife Gate Valves Market Analysis and Forecast by Application
6.1. Market Trends
6.2. Introduction
6.2.1. Basis Point Share (BPS) Analysis by Application
6.2.2. Y-o-Y Growth Projections by Application
6.3. Knife Gate Valves Market Size and Volume Forecast by Application
6.3.1. Pulp and Paper
6.3.2. Wastewater Treatment
6.3.3. Oil and Gas
6.3.4. Mining
6.3.5. Power
6.3.6. Others
6.3.7. The puple and paper holds an important share in terms of applications, and accounts for 29% of the market share.
6.4. Absolute $ Opportunity Assessment by Application
6.5. Market Attractiveness/Growth Potential Analysis by Application
7. Global Knife Gate Valves Market Analysis and Forecast by Sales Channel
7.1. Market Trends
7.2. Introduction
7.2.1. Basis Point Share (BPS) Analysis by Sales Channel
7.2.2. Y-o-Y Growth Projections by Sales Channel
7.3. Knife Gate Valves Market Size and Volume Forecast by Sales Channel
7.3.1. Manufacturer/Distributor/Service Provider
7.3.2. Aftermarket
7.4. Absolute $ Opportunity Assessment by Sales Channel
7.5. Market Attractiveness/Growth Potential Analysis by Sales Channel
8. Global Knife Gate Valves Market Analysis and Forecast by Region
8.1. Market Trends
8.2. Introduction
8.2.1. Basis Point Share (BPS) Analysis by Region
8.2.2. Y-o-Y Growth Projections by Region
8.3. Knife Gate Valves Market Size and Volume Forecast by Region
8.3.1. North America
8.3.2. Latin America
8.3.3. Europe
8.3.4. Asia Pacific
8.3.5. Middle East and Africa (MEA)
8.4. Absolute $ Opportunity Assessment by Region
8.5. Market Attractiveness/Growth Potential Analysis by Region
8.6. Global Knife Gate Valves Demand Share Forecast, 2019-2026
9. North America Knife Gate Valves Market Analysis and Forecast
9.1. Introduction
9.1.1. Basis Point Share (BPS) Analysis by Country
9.1.2. Y-o-Y Growth Projections by Country
9.2. North America Knife Gate Valves Market Size and Volume Forecast by Country
9.2.1. U.S.
9.2.2. Canada
9.3. Absolute $ Opportunity Assessment by Country
9.4. North America Knife Gate Valves Market Size and Volume Forecast by Application
9.4.1. Pulp and Paper
9.4.2. Wastewater Treatment
9.4.3. Oil and Gas
9.4.4. Mining
9.4.5. Power
9.4.6. Others
9.4.7. The puple and paper holds an important share in terms of applications, and accounts for 29% of the market share.
9.5. Basis Point Share (BPS) Analysis by Application
9.6. Y-o-Y Growth Projections by Application
9.7. North America Knife Gate Valves Market Size and Volume Forecast by Type
9.7.1. Pneumatic Knife Gate Valve
9.7.2. Electric Knife Gate Valve
9.7.3. Manual Knife Gate Valve
9.7.4. Other Types
9.7.5. The segment of manual knife gate valve holds a comparatively larger share in global market, which accounts for about 50%.
9.8. Basis Point Share (BPS) Analysis by Type
9.9. Y-o-Y Growth Projections by Type
9.10. Market Attractiveness/Growth Potential Analysis
9.10.1. By Country
9.10.2. By Product Type
9.10.3. By Application
9.10.4. By Sales Channel
9.11. North America Knife Gate Valves Demand Share Forecast, 2019-2026
10. Latin America Knife Gate Valves Market Analysis and Forecast
10.1. Introduction
10.1.1. Basis Point Share (BPS) Analysis by Country
10.1.2. Y-o-Y Growth Projections by Country
10.1.3. Latin America Average Pricing Analysis
10.2. Latin America Knife Gate Valves Market Size and Volume Forecast by Country
10.2.1. Brazil
10.2.2. Mexico
10.2.3. Rest of Latin America
10.3. Absolute $ Opportunity Assessment by Country
10.4. Latin America Knife Gate Valves Market Size and Volume Forecast by Application
10.4.1. Pulp and Paper
10.4.2. Wastewater Treatment
10.4.3. Oil and Gas
10.4.4. Mining
10.4.5. Power
10.4.6. Others
10.4.7. The puple and paper holds an important share in terms of applications, and accounts for 29% of the market share.
10.5. Basis Point Share (BPS) Analysis by Application
10.6. Y-o-Y Growth Projections by Application
10.7. Latin America Knife Gate Valves Market Size and Volume Forecast by Type
10.7.1. Pneumatic Knife Gate Valve
10.7.2. Electric Knife Gate Valve
10.7.3. Manual Knife Gate Valve
10.7.4. Other Types
10.7.5. The segment of manual knife gate valve holds a comparatively larger share in global market, which accounts for about 50%.
10.8. Basis Point Share (BPS) Analysis by Type
10.9. Y-o-Y Growth Projections by Type
10.10. Market Attractiveness/Growth Potential Analysis
10.10.1. By Country
10.10.2. By Product Type
10.10.3. By Application
10.10.4. By Sales Channel
10.11. Latin America Knife Gate Valves Demand Share Forecast, 2019-2026
11. Europe Knife Gate Valves Market Analysis and Forecast
11.1. Introduction
11.1.1. Basis Point Share (BPS) Analysis by Country
11.1.2. Y-o-Y Growth Projections by Country
11.1.3. Europe Average Pricing Analysis
11.2. Europe Knife Gate Valves Market Size and Volume Forecast by Country
11.2.1. Germany
11.2.2. France
11.2.3. Italy
11.2.4. U.K.
11.2.5. Spain
11.2.6. Russia
11.2.7. Rest of Europe
11.3. Absolute $ Opportunity Assessment by Country
11.4. Europe Knife Gate Valves Market Size and Volume Forecast by Application
11.4.1. Pulp and Paper
11.4.2. Wastewater Treatment
11.4.3. Oil and Gas
11.4.4. Mining
11.4.5. Power
11.4.6. Others
11.4.7. The puple and paper holds an important share in terms of applications, and accounts for 29% of the market share.
11.5. Basis Point Share (BPS) Analysis by Application
11.6. Y-o-Y Growth Projections by Application
11.7. Europe Knife Gate Valves Market Size and Volume Forecast by Type
11.7.1. Pneumatic Knife Gate Valve
11.7.2. Electric Knife Gate Valve
11.7.3. Manual Knife Gate Valve
11.7.4. Other Types
11.7.5. The segment of manual knife gate valve holds a comparatively larger share in global market, which accounts for about 50%.
11.8. Basis Point Share (BPS) Analysis by Type
11.9. Y-o-Y Growth Projections by Type
11.10. Market Attractiveness/Growth Potential Analysis
11.10.1. By Country
11.10.2. By Product Type
11.10.3. By Application
11.10.4. By Sales Channel
11.11. Europe Knife Gate Valves Demand Share, 2019-2026
12. Asia Pacific Knife Gate Valves Market Analysis and Forecast
12.1. Introduction
12.1.1. Basis Point Share (BPS) Analysis by Country
12.1.2. Y-o-Y Growth Projections by Country
12.1.3. Asia Pacific Average Pricing Analysis
12.2. Asia Pacific Knife Gate Valves Market Size and Volume Forecast by Country
12.2.1. China
12.2.2. Japan
12.2.3. South Korea
12.2.4. India
12.2.5. Australia
12.2.6. Rest of Asia Pacific (APAC)
12.3. Absolute $ Opportunity Assessment by Country
12.4. Asia Pacific Knife Gate Valves Market Size and Volume Forecast by Application
12.4.1. Pulp and Paper
12.4.2. Wastewater Treatment
12.4.3. Oil and Gas
12.4.4. Mining
12.4.5. Power
12.4.6. Others
12.4.7. The puple and paper holds an important share in terms of applications, and accounts for 29% of the market share.
12.5. Basis Point Share (BPS) Analysis by Application
12.6. Y-o-Y Growth Projections by Application
12.7. Asia Pacific Knife Gate Valves Market Size and Volume Forecast by Type
12.7.1. Pneumatic Knife Gate Valve
12.7.2. Electric Knife Gate Valve
12.7.3. Manual Knife Gate Valve
12.7.4. Other Types
12.7.5. The segment of manual knife gate valve holds a comparatively larger share in global market, which accounts for about 50%.
12.8. Basis Point Share (BPS) Analysis by Type
12.9. Y-o-Y Growth Projections by Type
12.10. Market Attractiveness/Growth Potential Analysis
12.10.1. By Country
12.10.2. By Product Type
12.10.3. By Application
12.10.4. By Sales Channel
12.11. Asia Pacific Knife Gate Valves Demand Share, 2019-2026
13. Middle East & Africa Knife Gate Valves Market Analysis and Forecast
13.1. Introduction
13.1.1. Basis Point Share (BPS) Analysis by Country
13.1.2. Y-o-Y Growth Projections by Country
13.1.3. Asia Pacific Average Pricing Analysis
13.2. Middle East & Africa Knife Gate Valves Market Size and Volume Forecast by Country
13.2.1. Saudi Arabia
13.2.2. South Africa
13.2.3. UAE
13.2.4. Rest of Middle East & Africa (MEA)
13.3. Absolute $ Opportunity Assessment by Country
13.4. Middle East & Africa Knife Gate Valves Market Size and Volume Forecast by Application
13.4.1. Pulp and Paper
13.4.2. Wastewater Treatment
13.4.3. Oil and Gas
13.4.4. Mining
13.4.5. Power
13.4.6. Others
13.4.7. The puple and paper holds an important share in terms of applications, and accounts for 29% of the market share.
13.5. Basis Point Share (BPS) Analysis by Application
13.6. Y-o-Y Growth Projections by Application
13.7. Middle East & Africa Knife Gate Valves Market Size and Volume Forecast by Type
13.7.1. Pneumatic Knife Gate Valve
13.7.2. Electric Knife Gate Valve
13.7.3. Manual Knife Gate Valve
13.7.4. Other Types
13.7.5. The segment of manual knife gate valve holds a comparatively larger share in global market, which accounts for about 50%.
13.8. Basis Point Share (BPS) Analysis by Type
13.9. Y-o-Y Growth Projections by Type
13.10. Market Attractiveness/Growth Potential Analysis
13.10.1. By Country
13.10.2. By Product Type
13.10.3. By Application
13.10.4. By Sales Channel
13.11. Middle East & Africa Knife Gate Valves Demand Share, 2019-2026
14. Competition Landscape
14.1. Global Knife Gate Valves Market: Market Share Analysis
14.2. Knife Gate Valves Distributors and Customers
14.3. Knife Gate Valves Market: Competitive Dashboard
14.4. Company Profiles (Details Overview, Financials, Developments, Strategy)
14.4.1. Orbinox
14.4.1.1. Overview
14.4.1.2. Financials
14.4.1.3. Developments
14.4.1.4. Strategic Outlook
14.4.2. DeZURIK
14.4.2.1. Overview
14.4.2.2. Financials
14.4.2.3. Developments
14.4.2.4. Strategic Outlook
14.4.3. Emerson (Pentair Valves & Controls)
14.4.3.1. Overview
14.4.3.2. Financials
14.4.3.3. Developments
14.4.3.4. Strategic Outlook
14.4.4. VAG
14.4.4.1. Overview
14.4.4.2. Financials
14.4.4.3. Developments
14.4.4.4. Strategic Outlook
14.4.5. Bray International
14.4.5.1. Overview
14.4.5.2. Financials
14.4.5.3. Developments
14.4.5.4. Strategic Outlook
14.4.6. Flowrox
14.4.6.1. Overview
14.4.6.2. Financials
14.4.6.3. Developments
14.4.6.4. Strategic Outlook
14.4.7. AVK
14.4.7.1. Overview
14.4.7.2. Financials
14.4.7.3. Developments
14.4.7.4. Strategic Outlook
14.4.8. Weir
14.4.8.1. Overview
14.4.8.2. Financials
14.4.8.3. Developments
14.4.8.4. Strategic Outlook
14.4.9. Stafsjö Valves
14.4.9.1. Overview
14.4.9.2. Financials
14.4.9.3. Developments
14.4.9.4. Strategic Outlook
14.4.10. Velan
14.4.10.1. Overview
14.4.10.2. Financials
14.4.10.3. Developments
14.4.10.4. Strategic Outlook
14.4.11. ERHARD
14.4.11.1. Overview
14.4.11.2. Financials
14.4.11.3. Developments
14.4.11.4. Strategic Outlook
14.4.12. CYL
14.4.12.1. Overview
14.4.12.2. Financials
14.4.12.3. Developments
14.4.12.4. Strategic Outlook
14.4.13. Red Valve
14.4.13.1. Overview
14.4.13.2. Financials
14.4.13.3. Developments
14.4.13.4. Strategic Outlook
14.4.14. Tecofi
14.4.14.1. Overview
14.4.14.2. Financials
14.4.14.3. Developments
14.4.14.4. Strategic Outlook
14.4.15. ITT
14.4.15.1. Overview
14.4.15.2. Financials
14.4.15.3. Developments
14.4.15.4. Strategic Outlook
14.4.16. SISTAG (WEY Valve)
14.4.16.1. Overview
&