Market Overview:
The global load frames market is expected to grow at a CAGR of 5.5% during the forecast period from 2018 to 2030. The growth in this market can be attributed to the increasing demand for load frames from various end-use industries, such as automotive, aerospace, civil engineering, biomedical device manufacturing and materials science. In terms of type, the multiaxial segment is expected to dominate the global load frames market during the forecast period. This can be attributed to its ability to test products in all directions simultaneously under controlled loads and stresses.
Product Definition:
A Load Frame is a structural member that transfers the load of a roof or floor system to the foundation. The load frames should be designed to resist the design loads for which they are intended.
Multiaxial:
Multiaxial is a new term in the field of engineering and it has been used to describe structures or materials that can sustain axial loading. The multiaxial material will have the ability to resist rotation, compression, extension and shear stress at any given point. Materials which are not capable of sustaining such stress may fracture or break down when exposed to extreme forces.
Uniaxial:
Uniaxial load frames are used in applications where the cross-axis force is required to be constant. Uniaxial load frames can provide higher accuracy and repeatability than isotropic or biaxial ones. They are mainly used for testing purposes in the automotive industry, but they have found their way into several other industries as well due to their high efficiency and low manufacturing cost.
Application Insights:
The automotive application segment accounted for the largest revenue share of over 30% in 2017. The use of load frames in the automobile industry is expected to witness growth owing to its rising demand from countries, such as India and China. In addition, increasing production capacities in emerging markets including Brazil, South Korea, Indonesia and Malaysia are expected to propel market growth over the forecast period.
Aerospace is another key application segment that accounted for a significant revenue share in 2017 owing to high product demand from aircraft manufacturers including Airbus SE and Boeing Co., Ltd. Material science includes various applications across diverse industries such as semiconductors & electronics, pharmaceuticals & healthcare devices among others which include load frame based testing equipment for durability assessment of components or products during manufacturing process or after completion of a test run. Increasing R&D activities by major players coupled with technological advancements are anticipated fuel market growth across various applications during the forecast period leading up to 2030.
Regional Analysis:
Asia Pacific dominated the global market in terms of revenue share in 2016 at a valuation of over USD X billion owing to the presence of key automotive and aerospace manufacturers, such as Airbus S.A., Honda Motor Co., Ltd, Toyota Industries Corporation, etc. The region is expected to continue its dominance over the forecast period due to factors such as growing population and rapid industrialization & urbanization resulting in increasing demand for consumer goods along with automobiles & aircrafts.
Europe was valued at USD X million in 2016.
Growth Factors:
- Increasing demand for load frames in the semiconductor and electronics industry for testing and measuring purposes
- Rising popularity of miniaturized load frames in portable devices
- Growing use of load frames in research and development laboratories
- Proliferation of online test equipment rental services
- Technological advancements that improve the accuracy, efficiency, and versatility of load frames
Scope Of The Report
Report Attributes
Report Details
Report Title
Load Frames Market Research Report
By Type
Multiaxial, Uniaxial
By Application
Automotive, Aerospace, Civil Engineering, Biomedical Device Manufacturing, Materials Science
By Companies
MTS, Humboldt, Instron, CFM Schiller, Gilson, GDS Instruments, TA Instruments, THELKIN, Shore Western, Hoskin Scientific, C-FER Technologies, Karol-Warner, CONTROLS, Aimil, DGSI, M&L Testing Equipment, Geocomp
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
244
Number of Tables & Figures
171
Customization Available
Yes, the report can be customized as per your need.
Global Load Frames Market Report Segments:
The global Load Frames market is segmented on the basis of:
Types
Multiaxial, Uniaxial
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Automotive, Aerospace, Civil Engineering, Biomedical Device Manufacturing, Materials Science
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- MTS
- Humboldt
- Instron
- CFM Schiller
- Gilson
- GDS Instruments
- TA Instruments
- THELKIN
- Shore Western
- Hoskin Scientific
- C-FER Technologies
- Karol-Warner
- CONTROLS
- Aimil
- DGSI
- M&L Testing Equipment
- Geocomp
Highlights of The Load Frames Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- Multiaxial
- Uniaxial
- By Application:
- Automotive
- Aerospace
- Civil Engineering
- Biomedical Device Manufacturing
- Materials Science
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Load Frames Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
Load Frames is a term used in the gaming industry to describe how many frames per second (fps) a game is running at.
Some of the major companies in the load frames market are MTS, Humboldt, Instron, CFM Schiller, Gilson, GDS Instruments, TA Instruments, THELKIN, Shore Western, Hoskin Scientific, C-FER Technologies, Karol-Warner, CONTROLS, Aimil, DGSI, M&L Testing Equipment, Geocomp.
The load frames market is expected to grow at a compound annual growth rate of 5.5%.
1. Executive Summary
2. Assumptions and Acronyms Used
3. Research Methodology
4. Load Frames Market Overview
4.1. Introduction
4.1.1. Market Taxonomy
4.1.2. Market Definition
4.2. Macro-Economic Factors
4.2.1. Industry Outlook
4.3. Load Frames Market Dynamics
4.3.1. Market Drivers
4.3.2. Market Restraints
4.3.3. Opportunity
4.3.4. Market Trends
4.4. Load Frames Market - Supply Chain
4.5. Global Load Frames Market Forecast
4.5.1. Load Frames Market Size (US$ Mn) and Y-o-Y Growth
4.5.2. Load Frames Market Size (000 Units) and Y-o-Y Growth
4.5.3. Load Frames Market Absolute $ Opportunity
5. Global Load Frames Market Analysis and Forecast by Type
5.1. Market Trends
5.2. Introduction
5.2.1. Basis Point Share (BPS) Analysis by Type
5.2.2. Y-o-Y Growth Projections by Type
5.3. Load Frames Market Size and Volume Forecast by Type
5.3.1. Multiaxial
5.3.2. Uniaxial
5.4. Absolute $ Opportunity Assessment by Type
5.5. Market Attractiveness/Growth Potential Analysis by Type
6. Global Load Frames Market Analysis and Forecast by Application
6.1. Market Trends
6.2. Introduction
6.2.1. Basis Point Share (BPS) Analysis by Application
6.2.2. Y-o-Y Growth Projections by Application
6.3. Load Frames Market Size and Volume Forecast by Application
6.3.1. Automotive
6.3.2. Aerospace
6.3.3. Civil Engineering
6.3.4. Biomedical Device Manufacturing
6.3.5. Materials Science
6.4. Absolute $ Opportunity Assessment by Application
6.5. Market Attractiveness/Growth Potential Analysis by Application
7. Global Load Frames Market Analysis and Forecast by Sales Channel
7.1. Market Trends
7.2. Introduction
7.2.1. Basis Point Share (BPS) Analysis by Sales Channel
7.2.2. Y-o-Y Growth Projections by Sales Channel
7.3. Load Frames Market Size and Volume Forecast by Sales Channel
7.3.1. Manufacturer/Distributor/Service Provider
7.3.2. Aftermarket
7.4. Absolute $ Opportunity Assessment by Sales Channel
7.5. Market Attractiveness/Growth Potential Analysis by Sales Channel
8. Global Load Frames Market Analysis and Forecast by Region
8.1. Market Trends
8.2. Introduction
8.2.1. Basis Point Share (BPS) Analysis by Region
8.2.2. Y-o-Y Growth Projections by Region
8.3. Load Frames Market Size and Volume Forecast by Region
8.3.1. North America
8.3.2. Latin America
8.3.3. Europe
8.3.4. Asia Pacific
8.3.5. Middle East and Africa (MEA)
8.4. Absolute $ Opportunity Assessment by Region
8.5. Market Attractiveness/Growth Potential Analysis by Region
8.6. Global Load Frames Demand Share Forecast, 2019-2029
9. North America Load Frames Market Analysis and Forecast
9.1. Introduction
9.1.1. Basis Point Share (BPS) Analysis by Country
9.1.2. Y-o-Y Growth Projections by Country
9.2. North America Load Frames Market Size and Volume Forecast by Country
9.2.1. U.S.
9.2.2. Canada
9.3. Absolute $ Opportunity Assessment by Country
9.4. North America Load Frames Market Size and Volume Forecast by Application
9.4.1. Automotive
9.4.2. Aerospace
9.4.3. Civil Engineering
9.4.4. Biomedical Device Manufacturing
9.4.5. Materials Science
9.5. Basis Point Share (BPS) Analysis by Application
9.6. Y-o-Y Growth Projections by Application
9.7. North America Load Frames Market Size and Volume Forecast by Type
9.7.1. Multiaxial
9.7.2. Uniaxial
9.8. Basis Point Share (BPS) Analysis by Type
9.9. Y-o-Y Growth Projections by Type
9.10. Market Attractiveness/Growth Potential Analysis
9.10.1. By Country
9.10.2. By Product Type
9.10.3. By Application
9.10.4. By Sales Channel
9.11. North America Load Frames Demand Share Forecast, 2019-2029
10. Latin America Load Frames Market Analysis and Forecast
10.1. Introduction
10.1.1. Basis Point Share (BPS) Analysis by Country
10.1.2. Y-o-Y Growth Projections by Country
10.1.3. Latin America Average Pricing Analysis
10.2. Latin America Load Frames Market Size and Volume Forecast by Country
10.2.1. Brazil
10.2.2. Mexico
10.2.3. Rest of Latin America
10.3. Absolute $ Opportunity Assessment by Country
10.4. Latin America Load Frames Market Size and Volume Forecast by Application
10.4.1. Automotive
10.4.2. Aerospace
10.4.3. Civil Engineering
10.4.4. Biomedical Device Manufacturing
10.4.5. Materials Science
10.5. Basis Point Share (BPS) Analysis by Application
10.6. Y-o-Y Growth Projections by Application
10.7. Latin America Load Frames Market Size and Volume Forecast by Type
10.7.1. Multiaxial
10.7.2. Uniaxial
10.8. Basis Point Share (BPS) Analysis by Type
10.9. Y-o-Y Growth Projections by Type
10.10. Market Attractiveness/Growth Potential Analysis
10.10.1. By Country
10.10.2. By Product Type
10.10.3. By Application
10.10.4. By Sales Channel
10.11. Latin America Load Frames Demand Share Forecast, 2019-2029
11. Europe Load Frames Market Analysis and Forecast
11.1. Introduction
11.1.1. Basis Point Share (BPS) Analysis by Country
11.1.2. Y-o-Y Growth Projections by Country
11.1.3. Europe Average Pricing Analysis
11.2. Europe Load Frames Market Size and Volume Forecast by Country
11.2.1. Germany
11.2.2. France
11.2.3. Italy
11.2.4. U.K.
11.2.5. Spain
11.2.6. Russia
11.2.7. Rest of Europe
11.3. Absolute $ Opportunity Assessment by Country
11.4. Europe Load Frames Market Size and Volume Forecast by Application
11.4.1. Automotive
11.4.2. Aerospace
11.4.3. Civil Engineering
11.4.4. Biomedical Device Manufacturing
11.4.5. Materials Science
11.5. Basis Point Share (BPS) Analysis by Application
11.6. Y-o-Y Growth Projections by Application
11.7. Europe Load Frames Market Size and Volume Forecast by Type
11.7.1. Multiaxial
11.7.2. Uniaxial
11.8. Basis Point Share (BPS) Analysis by Type
11.9. Y-o-Y Growth Projections by Type
11.10.Market Attractiveness/Growth Potential Analysis
11.10.1. By Country
11.10.2. By Product Type
11.10.3. By Application
11.10.4. By Sales Channel
11.11. Europe Load Frames Demand Share, 2019-2029
12. Asia Pacific Load Frames Market Analysis and Forecast
12.1. Introduction
12.1.1. Basis Point Share (BPS) Analysis by Country
12.1.2. Y-o-Y Growth Projections by Country
12.1.3. Asia Pacific Average Pricing Analysis
12.2. Asia Pacific Load Frames Market Size and Volume Forecast by Country
12.2.1. China
12.2.2. Japan
12.2.3. South Korea
12.2.4. India
12.2.5. Australia
12.2.6. Rest of Asia Pacific (APAC)
12.3. Absolute $ Opportunity Assessment by Country
12.4. Asia Pacific Load Frames Market Size and Volume Forecast by Application
12.4.1. Automotive
12.4.2. Aerospace
12.4.3. Civil Engineering
12.4.4. Biomedical Device Manufacturing
12.4.5. Materials Science
12.5. Basis Point Share (BPS) Analysis by Application
12.6. Y-o-Y Growth Projections by Application
12.7. Asia Pacific Load Frames Market Size and Volume Forecast by Type
12.7.1. Multiaxial
12.7.2. Uniaxial
12.8. Basis Point Share (BPS) Analysis by Type
12.9. Y-o-Y Growth Projections by Type
12.10. Market Attractiveness/Growth Potential Analysis
12.10.1. By Country
12.10.2. By Product Type
12.10.3. By Application
12.10.4. By Sales Channel
12.11. Asia Pacific Load Frames Demand Share, 2019-2029
13. Middle East & Africa Load Frames Market Analysis and Forecast
13.1. Introduction
13.1.1. Basis Point Share (BPS) Analysis by Country
13.1.2. Y-o-Y Growth Projections by Country
13.1.3. Asia Pacific Average Pricing Analysis
13.2. Middle East & Africa Load Frames Market Size and Volume Forecast by Country
13.2.1. Saudi Arabia
13.2.2. South Africa
13.2.3. UAE
13.2.4. Rest of Middle East & Africa (MEA)
13.3. Absolute $ Opportunity Assessment by Country
13.4. Middle East & Africa Load Frames Market Size and Volume Forecast by Application
13.4.1. Automotive
13.4.2. Aerospace
13.4.3. Civil Engineering
13.4.4. Biomedical Device Manufacturing
13.4.5. Materials Science
13.5. Basis Point Share (BPS) Analysis by Application
13.6. Y-o-Y Growth Projections by Application
13.7. Middle East & Africa Load Frames Market Size and Volume Forecast by Type
13.7.1. Multiaxial
13.7.2. Uniaxial
13.8. Basis Point Share (BPS) Analysis by Type
13.9. Y-o-Y Growth Projections by Type
13.10. Market Attractiveness/Growth Potential Analysis
13.10.1. By Country
13.10.2. By Product Type
13.10.3. By Application
13.10.4. By Sales Channel
13.11. Middle East & Africa Load Frames Demand Share, 2019-2029
14. Competition Landscape
14.1. Global Load Frames Market: Market Share Analysis
14.2. Load Frames Distributors and Customers
14.3. Load Frames Market: Competitive Dashboard
14.4. Company Profiles (Details Overview, Financials, Developments, Strategy)
14.4.1. MTS
14.4.1.1. Overview
14.4.1.2. Financials
14.4.1.3. Developments
14.4.1.4. Strategic Outlook
14.4.2. Humboldt
14.4.2.1. Overview
14.4.2.2. Financials
14.4.2.3. Developments
14.4.2.4. Strategic Outlook
14.4.3. Instron
14.4.3.1. Overview
14.4.3.2. Financials
14.4.3.3. Developments
14.4.3.4. Strategic Outlook
14.4.4. CFM Schiller
14.4.4.1. Overview
14.4.4.2. Financials
14.4.4.3. Developments
14.4.4.4. Strategic Outlook
14.4.5. Gilson
14.4.5.1. Overview
14.4.5.2. Financials
14.4.5.3. Developments
14.4.5.4. Strategic Outlook
14.4.6. GDS Instruments
14.4.6.1. Overview
14.4.6.2. Financials
14.4.6.3. Developments
14.4.6.4. Strategic Outlook
14.4.7. TA Instruments
14.4.7.1. Overview
14.4.7.2. Financials
14.4.7.3. Developments
14.4.7.4. Strategic Outlook
14.4.8. THELKIN
14.4.8.1. Overview
14.4.8.2. Financials
14.4.8.3. Developments
14.4.8.4. Strategic Outlook
14.4.9. Shore Western
14.4.9.1. Overview
14.4.9.2. Financials
14.4.9.3. Developments
14.4.9.4. Strategic Outlook
14.4.10. Hoskin Scientific
14.4.10.1. Overview
14.4.10.2. Financials
14.4.10.3. Developments
14.4.10.4. Strategic Outlook
14.4.11. C-FER Technologies
14.4.11.1. Overview
14.4.11.2. Financials
14.4.11.3. Developments
14.4.11.4. Strategic Outlook
14.4.12. Karol-Warner
14.4.12.1. Overview
14.4.12.2. Financials
14.4.12.3. Developments
14.4.12.4. Strategic Outlook
14.4.13. CONTROLS
14.4.13.1. Overview
14.4.13.2. Financials
14.4.13.3. Developments
14.4.13.4. Strategic Outlook
14.4.14. Aimil
14.4.14.1. Overview
14.4.14.2. Financials
14.4.14.3. Developments
14.4.14.4. Strategic Outlook
14.4.15. DGSI
14.4.15.1. Overview
14.4.15.2. Financials
14.4.15.3. Developments
14.4.15.4. Strategic Outlook
14.4.16. M&L Testing Equipment
14.4.16.1. Overview
14.4.16.2. Financials
14.4.16.3. Developments
14.4.16.4. Strategic Outlook
14.4.17. Geocomp
14.4.17.1. Overview
14.4.17.2. Financials
14.4.17.3. Developments
14.4.17.4. Strategic Outlook
14.4.18. COMPANY 18
14.4.18.1. Overview
14.4.18.2. Financials
14.4.18.3. Developments
14.4.18.4. Strategic Outlook
14.4.19. COMPANY 19
14.4.19.1. Overview
14.4.19.2. Financials
14.4.19.3. Developments
14.4.19.4. Strategic Outlook
14.4.20. COMPANY 20
14.4.20.1. Overview
14.4.20.2. Financials
14.4.20.3. Developments
14.4.20.4. Strategic Outlook
