The global metal and alloy sputtering target material market is expected to grow at a CAGR of 4.5% during the forecast period, to reach USD 1.2 billion by 2030 from USD 0.9 billion in 2018. The growth of this market is driven by the increasing demand for semiconductor and solar energy applications, which are expected to drive the demand for metal and alloy sputtering target materials in the near future. Aluminum sputtering target material accounted for the largest share of this market in 2018, followed by titanium sputtering target material, copper sputtering target material, tantalum sputtering target material, tungsten sputtering target material, cobalt sputtering target material and nickel-molybdenum alloy (Ni-Mo) as well as other alloys such as molybdenum (Mo), tantalum (Ta), niobium (Nb), zirconium (Zr) and hafnium (Hf). Aluminum was used extensively in semiconductor applications due to its low cost; however it has been replaced with copper due to its higher conductivity properties. Tantalum was used extensively in solar energy applications due to its high melting point; however it has been replaced with aluminum due to its lower cost. Copper was used extensively in flat panel display applications because it can be easily deposited on glass substrates without any need for an additional coating layer; however it has been replaced with aluminum due to its lower cost.
Some Of The Growth Factors Of This Market:
- One of the key factors driving this market is the increasing demand for metal and alloy sputtering targets due to their use in semiconductor manufacturing processes such as photolithography and etching.
- Another factor driving this market is the increasing demand for metal and alloy sputtering targets due to their use in semiconductor manufacturing processes such as photolithography and etching.
- One of the key challenges faced by this market is that there are no established standards for measuring sputter yield or efficiency rates which makes it difficult to compare different products on an equal footing with each other.
Industry Growth Insights published a new data on “Metal & Alloy Sputtering Target Material Market”. The research report is titled “Metal & Alloy Sputtering Target Material Market research by Types (AluminumSputtering Target Material, Titanium Sputtering Target Material, Copper Sputtering Target Material, Tantalum Sputtering Target Material, Tungsten Sputtering Target Material, Cobalt Sputtering Target Material, Nickel Sputtering Target Material, Molybdenum Sputtering Target Material, Alloy Sputtering Target Material, Others), By Applications (Semiconductor, Solar Energy, Flat Panel Display), By Players/Companies JX Nippon Mining & Metals Corporation, Praxair, Plansee SE, Mitsui Mining & Smelting, Hitachi Metals, Honeywell, Sumitomo Chemical, ULVAC, Materion (Heraeus), GRIKIN Advanced Material Co., Ltd., TOSOH, Ningbo Jiangfeng, Heesung, Luvata, Fujian Acetron New Materials Co., Ltd, Changzhou Sujing Electronic Material, Luoyang Sifon Electronic Materials, FURAYA Metals Co., Ltd, Advantec, Angstrom Sciences, Umicore Thin Film Products, TANAKA”.
Scope Of The Report
Report Attributes
Report Details
Report Title
Metal & Alloy Sputtering Target Material Market Research Report
By Type
AluminumSputtering Target Material, Titanium Sputtering Target Material, Copper Sputtering Target Material, Tantalum Sputtering Target Material, Tungsten Sputtering Target Material, Cobalt Sputtering Target Material, Nickel Sputtering Target Material, Molybdenum Sputtering Target Material, Alloy Sputtering Target Material, Others
By Application
Semiconductor, Solar Energy, Flat Panel Display
By Companies
JX Nippon Mining & Metals Corporation, Praxair, Plansee SE, Mitsui Mining & Smelting, Hitachi Metals, Honeywell, Sumitomo Chemical, ULVAC, Materion (Heraeus), GRIKIN Advanced Material Co., Ltd., TOSOH, Ningbo Jiangfeng, Heesung, Luvata, Fujian Acetron New Materials Co., Ltd, Changzhou Sujing Electronic Material, Luoyang Sifon Electronic Materials, FURAYA Metals Co., Ltd, Advantec, Angstrom Sciences, Umicore Thin Film Products, TANAKA
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
242
Number of Tables & Figures
170
Customization Available
Yes, the report can be customized as per your need.
Global Metal & Alloy Sputtering Target Material Market Report Segments:
The global Metal & Alloy Sputtering Target Material market is segmented on the basis of:
Types
AluminumSputtering Target Material, Titanium Sputtering Target Material, Copper Sputtering Target Material, Tantalum Sputtering Target Material, Tungsten Sputtering Target Material, Cobalt Sputtering Target Material, Nickel Sputtering Target Material, Molybdenum Sputtering Target Material, Alloy Sputtering Target Material, Others
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Semiconductor, Solar Energy, Flat Panel Display
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- JX Nippon Mining & Metals Corporation
- Praxair
- Plansee SE
- Mitsui Mining & Smelting
- Hitachi Metals
- Honeywell
- Sumitomo Chemical
- ULVAC
- Materion (Heraeus)
- GRIKIN Advanced Material Co., Ltd.
- TOSOH
- Ningbo Jiangfeng
- Heesung
- Luvata
- Fujian Acetron New Materials Co., Ltd
- Changzhou Sujing Electronic Material
- Luoyang Sifon Electronic Materials
- FURAYA Metals Co., Ltd
- Advantec
- Angstrom Sciences
- Umicore Thin Film Products
- TANAKA
Highlights of The Metal & Alloy Sputtering Target Material Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- AluminumSputtering Target Material
- Titanium Sputtering Target Material
- Copper Sputtering Target Material
- Tantalum Sputtering Target Material
- Tungsten Sputtering Target Material
- Cobalt Sputtering Target Material
- Nickel Sputtering Target Material
- Molybdenum Sputtering Target Material
- Alloy Sputtering Target Material
- Others
- By Application:
- Semiconductor
- Solar Energy
- Flat Panel Display
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Metal & Alloy Sputtering Target Material Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
Metal and alloy sputtering targets are made from a variety of materials, including aluminum, brass, copper, nickel-silver alloys (Ni-Ag), and titanium. They come in a variety of shapes and sizes to accommodate different needs. Metal & alloy sputtering targets can be used for deposition or evaporation processes.
Some of the major companies in the metal & alloy sputtering target material market are JX Nippon Mining & Metals Corporation, Praxair, Plansee SE, Mitsui Mining & Smelting, Hitachi Metals, Honeywell, Sumitomo Chemical, ULVAC, Materion (Heraeus), GRIKIN Advanced Material Co., Ltd., TOSOH, Ningbo Jiangfeng, Heesung, Luvata, Fujian Acetron New Materials Co., Ltd, Changzhou Sujing Electronic Material, Luoyang Sifon Electronic Materials, FURAYA Metals Co., Ltd, Advantec, Angstrom Sciences, Umicore Thin Film Products, TANAKA.
The metal & alloy sputtering target material market is expected to register a CAGR of 4.5%.
1. Executive Summary
2. Assumptions and Acronyms Used
3. Research Methodology
4. Metal & Alloy Sputtering Target Material Market Overview
4.1. Introduction
4.1.1. Market Taxonomy
4.1.2. Market Definition
4.2. Macro-Economic Factors
4.2.1. Industry Outlook
4.3. Metal & Alloy Sputtering Target Material Market Dynamics
4.3.1. Market Drivers
4.3.2. Market Restraints
4.3.3. Opportunity
4.3.4. Market Trends
4.4. Metal & Alloy Sputtering Target Material Market - Supply Chain
4.5. Global Metal & Alloy Sputtering Target Material Market Forecast
4.5.1. Metal & Alloy Sputtering Target Material Market Size (US$ Mn) and Y-o-Y Growth
4.5.2. Metal & Alloy Sputtering Target Material Market Size (000 Units) and Y-o-Y Growth
4.5.3. Metal & Alloy Sputtering Target Material Market Absolute $ Opportunity
5. Global Metal & Alloy Sputtering Target Material Market Analysis and Forecast by Type
5.1. Market Trends
5.2. Introduction
5.2.1. Basis Point Share (BPS) Analysis by Type
5.2.2. Y-o-Y Growth Projections by Type
5.3. Metal & Alloy Sputtering Target Material Market Size and Volume Forecast by Type
5.3.1. AluminumSputtering Target Material
5.3.2. Titanium Sputtering Target Material
5.3.3. Copper Sputtering Target Material
5.3.4. Tantalum Sputtering Target Material
5.3.5. Tungsten Sputtering Target Material
5.3.6. Cobalt Sputtering Target Material
5.3.7. Nickel Sputtering Target Material
5.3.8. Molybdenum Sputtering Target Material
5.3.9. Alloy Sputtering Target Material
5.3.10. Others
5.4. Absolute $ Opportunity Assessment by Type
5.5. Market Attractiveness/Growth Potential Analysis by Type
6. Global Metal & Alloy Sputtering Target Material Market Analysis and Forecast by Application
6.1. Market Trends
6.2. Introduction
6.2.1. Basis Point Share (BPS) Analysis by Application
6.2.2. Y-o-Y Growth Projections by Application
6.3. Metal & Alloy Sputtering Target Material Market Size and Volume Forecast by Application
6.3.1. Semiconductor
6.3.2. Solar Energy
6.3.3. Flat Panel Display
6.4. Absolute $ Opportunity Assessment by Application
6.5. Market Attractiveness/Growth Potential Analysis by Application
7. Global Metal & Alloy Sputtering Target Material Market Analysis and Forecast by Sales Channel
7.1. Market Trends
7.2. Introduction
7.2.1. Basis Point Share (BPS) Analysis by Sales Channel
7.2.2. Y-o-Y Growth Projections by Sales Channel
7.3. Metal & Alloy Sputtering Target Material Market Size and Volume Forecast by Sales Channel
7.3.1. Manufacturer/Distributor/Service Provider
7.3.2. Aftermarket
7.4. Absolute $ Opportunity Assessment by Sales Channel
7.5. Market Attractiveness/Growth Potential Analysis by Sales Channel
8. Global Metal & Alloy Sputtering Target Material Market Analysis and Forecast by Region
8.1. Market Trends
8.2. Introduction
8.2.1. Basis Point Share (BPS) Analysis by Region
8.2.2. Y-o-Y Growth Projections by Region
8.3. Metal & Alloy Sputtering Target Material Market Size and Volume Forecast by Region
8.3.1. North America
8.3.2. Latin America
8.3.3. Europe
8.3.4. Asia Pacific
8.3.5. Middle East and Africa (MEA)
8.4. Absolute $ Opportunity Assessment by Region
8.5. Market Attractiveness/Growth Potential Analysis by Region
8.6. Global Metal & Alloy Sputtering Target Material Demand Share Forecast, 2019-2026
9. North America Metal & Alloy Sputtering Target Material Market Analysis and Forecast
9.1. Introduction
9.1.1. Basis Point Share (BPS) Analysis by Country
9.1.2. Y-o-Y Growth Projections by Country
9.2. North America Metal & Alloy Sputtering Target Material Market Size and Volume Forecast by Country
9.2.1. U.S.
9.2.2. Canada
9.3. Absolute $ Opportunity Assessment by Country
9.4. North America Metal & Alloy Sputtering Target Material Market Size and Volume Forecast by Application
9.4.1. Semiconductor
9.4.2. Solar Energy
9.4.3. Flat Panel Display
9.5. Basis Point Share (BPS) Analysis by Application
9.6. Y-o-Y Growth Projections by Application
9.7. North America Metal & Alloy Sputtering Target Material Market Size and Volume Forecast by Type
9.7.1. AluminumSputtering Target Material
9.7.2. Titanium Sputtering Target Material
9.7.3. Copper Sputtering Target Material
9.7.4. Tantalum Sputtering Target Material
9.7.5. Tungsten Sputtering Target Material
9.7.6. Cobalt Sputtering Target Material
9.7.7. Nickel Sputtering Target Material
9.7.8. Molybdenum Sputtering Target Material
9.7.9. Alloy Sputtering Target Material
9.7.10. Others
9.8. Basis Point Share (BPS) Analysis by Type
9.9. Y-o-Y Growth Projections by Type
9.10. Market Attractiveness/Growth Potential Analysis
9.10.1. By Country
9.10.2. By Product Type
9.10.3. By Application
9.10.4. By Sales Channel
9.11. North America Metal & Alloy Sputtering Target Material Demand Share Forecast, 2019-2026
10. Latin America Metal & Alloy Sputtering Target Material Market Analysis and Forecast
10.1. Introduction
10.1.1. Basis Point Share (BPS) Analysis by Country
10.1.2. Y-o-Y Growth Projections by Country
10.1.3. Latin America Average Pricing Analysis
10.2. Latin America Metal & Alloy Sputtering Target Material Market Size and Volume Forecast by Country
10.2.1. Brazil
10.2.2. Mexico
10.2.3. Rest of Latin America
10.3. Absolute $ Opportunity Assessment by Country
10.4. Latin America Metal & Alloy Sputtering Target Material Market Size and Volume Forecast by Application
10.4.1. Semiconductor
10.4.2. Solar Energy
10.4.3. Flat Panel Display
10.5. Basis Point Share (BPS) Analysis by Application
10.6. Y-o-Y Growth Projections by Application
10.7. Latin America Metal & Alloy Sputtering Target Material Market Size and Volume Forecast by Type
10.7.1. AluminumSputtering Target Material
10.7.2. Titanium Sputtering Target Material
10.7.3. Copper Sputtering Target Material
10.7.4. Tantalum Sputtering Target Material
10.7.5. Tungsten Sputtering Target Material
10.7.6. Cobalt Sputtering Target Material
10.7.7. Nickel Sputtering Target Material
10.7.8. Molybdenum Sputtering Target Material
10.7.9. Alloy Sputtering Target Material
10.7.10. Others
10.8. Basis Point Share (BPS) Analysis by Type
10.9. Y-o-Y Growth Projections by Type
10.10. Market Attractiveness/Growth Potential Analysis
10.10.1. By Country
10.10.2. By Product Type
10.10.3. By Application
10.10.4. By Sales Channel
10.11. Latin America Metal & Alloy Sputtering Target Material Demand Share Forecast, 2019-2026
11. Europe Metal & Alloy Sputtering Target Material Market Analysis and Forecast
11.1. Introduction
11.1.1. Basis Point Share (BPS) Analysis by Country
11.1.2. Y-o-Y Growth Projections by Country
11.1.3. Europe Average Pricing Analysis
11.2. Europe Metal & Alloy Sputtering Target Material Market Size and Volume Forecast by Country
11.2.1. Germany
11.2.2. France
11.2.3. Italy
11.2.4. U.K.
11.2.5. Spain
11.2.6. Russia
11.2.7. Rest of Europe
11.3. Absolute $ Opportunity Assessment by Country
11.4. Europe Metal & Alloy Sputtering Target Material Market Size and Volume Forecast by Application
11.4.1. Semiconductor
11.4.2. Solar Energy
11.4.3. Flat Panel Display
11.5. Basis Point Share (BPS) Analysis by Application
11.6. Y-o-Y Growth Projections by Application
11.7. Europe Metal & Alloy Sputtering Target Material Market Size and Volume Forecast by Type
11.7.1. AluminumSputtering Target Material
11.7.2. Titanium puttering Target Material
11.7.3. Copper Sputtering Target Material
11.7.4. Tantalum Sputtering Target Material
11.7.5. Tungsten Sputtering Target Material
11.7.6. Cobalt Sputtering Target Material
11.7.7. Nickel Sputtering Target Material
11.7.8. Molybdenum Sputtering Target Material
11.7.9. Alloy Sputtering Target Material
11.7.10. Others
11.8. Basis Point Share (BPS) Analysis by Type
11.9. Y-o-Y Growth Projections by Type
11.10. Market Attractiveness/Growth Potential Analysis
11.10.1. By Country
11.10.2. By Product Type
11.10.3. By Application
11.10.4. By Sales Channel
11.11. Europe Metal & Alloy Sputtering Target Material Demand Share, 2019-2026
12. Asia Pacific Metal & Alloy Sputtering Target Material Market Analysis and Forecast
12.1. Introduction
12.1.1. Basis Point Share (BPS) Analysis by Country
12.1.2. Y-o-Y Growth Projections by Country
12.1.3. Asia Pacific Average Pricing Analysis
12.2. Asia Pacific Metal & Alloy Sputtering Target Material Market Size and Volume Forecast by Country
12.2.1. China
12.2.2. Japan
12.2.3. South Korea
12.2.4. India
12.2.5. Australia
12.2.6. Rest of Asia Pacific (APAC)
12.3. Absolute $ Opportunity Assessment by Country
12.4. Asia Pacific Metal & Alloy Sputtering Target Material Market Size and Volume Forecast by Application
12.4.1. Semiconductor
12.4.2. Solar Energy
12.4.3. Flat Panel Display
12.5. Basis Point Share (BPS) Analysis by Application
12.6. Y-o-Y Growth Projections by Application
12.7. Asia Pacific Metal & Alloy Sputtering Target Material Market Size and Volume Forecast by Type
12.7.1. AluminumSputtering Target Material
12.7.2. Titanium Sputtering Target Material
12.7.3. Copper Sputtering Target Material
12.7.4. Tantalum Sputtering Target Material
12.7.5. Tungsten Sputtering Target Material
12.7.6. Cobalt Sputtering Target Material
12.7.7. Nickel Sputtering Target Material
12.7.8. Molybdenum Sputtering Target Material
12.7.9. Alloy Sputtering Target Material
12.7.10. Others
12.8. Basis Point Share (BPS) Analysis by Type
12.9. Y-o-Y Growth Projections by Type
12.10. Market Attractiveness/Growth Potential Analysis
12.10.1. By Country
12.10.2. By Product Type
12.10.3. By Application
12.10.4. By Sales Channel
12.11. Asia Pacific Metal & Alloy Sputtering Target Material Demand Share, 2019-2026
13. Middle East & Africa Metal & Alloy Sputtering Target Material Market Analysis and Forecast
13.1. Introduction
13.1.1. Basis Point Share (BPS) Analysis by Country
13.1.2. Y-o-Y Growth Projections by Country
13.1.3. Asia Pacific Average Pricing Analysis
13.2. Middle East & Africa Metal & Alloy Sputtering Target Material Market Size and Volume Forecast by Country
13.2.1. Saudi Arabia
13.2.2. South Africa
13.2.3. UAE
13.2.4. Rest of Middle East & Africa (MEA)
13.3. Absolute $ Opportunity Assessment by Country
13.4. Middle East & Africa Metal & Alloy Sputtering Target Material Market Size and Volume Forecast by Application
13.4.1. Semiconductor
13.4.2. Solar Energy
13.4.3. Flat Panel Display
13.5. Basis Point Share (BPS) Analysis by Application
13.6. Y-o-Y Growth Projections by Application
13.7. Middle East & Africa Metal & Alloy Sputtering Target Material Market Size and Volume Forecast by Type
13.7.1. AluminumSputtering Target Material
13.7.2. Titanium Sputtering Target Material
13.7.3. Copper Sputtering Target Material
13.7.4. Tantalum Sputtering Target Material
13.7.5. Tungsten Sputtering Target Material
13.7.6. Cobalt Sputtering Target Material
13.7.7. Nickel Sputtering Target Material
13.7.8. Molybdenum Sputtering Target Material
13.7.9. Alloy Sputtering Target Material
13.7.10. Others
13.8. Basis Point Share (BPS) Analysis by Type
13.9. Y-o-Y Growth Projections by Type
13.10. Market Attractiveness/Growth Potential Analysis
13.10.1. By Country
13.10.2. By Product Type
13.10.3. By Application
13.10.4. By Sales Channel
13.11. Middle East & Africa Metal & Alloy Sputtering Target Material Demand Share, 2019-2026
14. Competition Landscape
14.1. Global Metal & Alloy Sputtering Target Material Market: Market Share Analysis
14.2. Metal & Alloy Sputtering Target Material Distributors and Customers
14.3. Metal & Alloy Sputtering Target Material Market: Competitive Dashboard
14.4. Company Profiles (Details Overview, Financials, Developments, Strategy)
14.4.1. JX Nippon Mining & Metals Corporation
14.4.1.1. Overview
14.4.1.2. Financials
14.4.1.3. Developments
14.4.1.4. Strategic Outlook
14.4.2. Praxair
14.4.2.1. Overview
14.4.2.2. Financials
14.4.2.3. Developments
14.4.2.4. Strategic Outlook
14.4.3. Plansee SE
14.4.3.1. Overview
14.4.3.2. Financials
14.4.3.3. Developments
14.4.3.4. Strategic Outlook
14.4.4. Mitsui Mining & Smelting
14.4.4.1. Overview
14.4.4.2. Financials
14.4.4.3. Developments
14.4.4.4. Strategic Outlook
14.4.5. Hitachi Metals
14.4.5.1. Overview
14.4.5.2. Financials
14.4.5.3. Developments
14.4.5.4. Strategic Outlook
14.4.6. Honeywell
14.4.6.1. Overview
14.4.6.2. Financials
14.4.6.3. Developments
14.4.6.4. Strategic Outlook
14.4.7. Sumitomo Chemical
14.4.7.1. Overview
14.4.7.2. Financials
14.4.7.3. Developments
14.4.7.4. Strategic Outlook
14.4.8. ULVAC
14.4.8.1. Overview
14.4.8.2. Financials
14.4.8.3. Developments
14.4.8.4. Strategic Outlook
14.4.9. Materion (Heraeus)
14.4.9.1. Overview
14.4.9.2. Financials
14.4.9.3. Developments
14.4.9.4. Strategic Outlook
14.4.10. GRIKIN Advanced Material Co., Ltd.
14.4.10.1. Overview
14.4.10.2. Financials
14.4.10.3. Developments
14.4.10.4. Strategic Outlook
14.4.11. TOSOH
14.4.11.1. Overview
14.4.11.2. Financials
14.4.11.3. Developments
14.4.11.4. Strategic Outlook
14.4.12. Ningbo Jiangfeng
14.4.12.1. Overview
14.4.12.2. Financials
14.4.12.3. Developments
14.4.12.4. Strategic Outlook
14.4.13. Heesung
14.4.13.1. Overview
1