Nitrogen is a chemical element that is found in the air and makes up 78% of the Earth's atmosphere. Nitrogen gas is used in many industries such as food and beverage, electronics, general industrial, and chemical & petrochemical. Nitrogen gas can be generated by three different types of nitrogen generators: PSA nitrogen generators, membrane nitrogen generators, or cryogenic air separation plants. The first step before the PSA process is compressed air passing through a combination of filters and an activated carbon tower with the purpose of removing dust, entrained oil and water. The purified air is then directed to one of two adsorption vessels that are packed with carbon molecular sieves (CMS). The remaining impurities such as carbon dioxide and residual moisture are adsorbed by the CMS at the entrance of the adsorbent bed. Gas flow is supplied under pressure into a bundle of membrane fibres. Due to the difference in partial pressures on the external and internal membrane surface, oxygen selectively permeates through the membrane allowing nitrogen to pass through at least 99% pure at desired purity level while oxygen which concentrates on external surface vented to atmosphere by portion produced nitrogen.
- Nitrogen is a key component in the production of ammonia, which is used to make fertilizers and explosives.
- The demand for nitrogen-based fertilizers has increased due to the growing population and increasing agricultural output.
- The use of nitrogen-based fertilizers has increased due to the development of new technologies that allow for more efficient fertilizer production and distribution, such as ammonia synthesis plants that produce urea from natural gas or coal gasification plants that produce ammonia from coal gasification processes.
- Nitrogen generation is also used in other industries such as oil refining, steelmaking, and chemical manufacturing where it is used as a reducing agent or an oxidizing agent respectively; this creates additional demand for nitrogen generation facilities in these industries as well.
- The cost of generating nitrogen can be reduced by using waste gases from other industrial processes such as steelmaking or oil refining; this creates additional demand for these gases which are then converted into nitric acid before being sold on to fertilizer manufacturers.
Industry Growth Insights published a new data on “Nitrogen Generation Market”. The research report is titled “Nitrogen Generation Market research by Types (PSA Nitrogen Generators, Membrane Nitrogen Generators, The first step before the PSA process is compressed air passing through a combination of filters and an activated carbon tower with the purpose of removing dust, entrained oil and water. The purified air is then directed to one of two adsorption vessels that are packed with carbon molecular sieves (CMS). The remaining impurities such as carbon dioxide and residual moisture are adsorbed by the CMS at the entrance of the adsorbent bed., Gas flow is supplied under pressure into a bundle of membrane fibres. Due to the difference in partial pressures on the external and internal membrane surface, oxygen selectively permeates through the membrane allowing nitrogen to pass through at the desired purity level. Oxygen which concentrates on the external surface of the membrane is vented to the atmosphere by a portion of produced nitrogen.), By Applications (Chemical & Petrochemical, Electronics, General Industrial, Food and Beverage, Others), By Players/Companies Air Liquide, Linde Engineering, Parker Hannifin, Peak Scientific, Atlas Copco, Praxair, Air Products & Chemicals, Taiyo Nippon Sanso, PCI Gases, Oxymat, Grasys, Inmatec Gase Technologie, Holtec Gas Systems, Kuraray, MVS Engineering, NOVAIR Noxerior, Sysadvance, Claind, AirSep, Rich, Absoger, On Site Gas Systems, Erredue, Mahler Ags, Isolcell, SMC, Generon, Air Water Bellpearl, South-Tek Systems, Fizz Dispense Optimization, Nano-Purification, Kofloc, Oxywise, Great Lakes Air, Shandong Gamma Gas Engineering, Titus, SAM GAS Projects, Advance Riken, Proton OnSite, FEDA Nitrogen, General Gas, Burns Machinery, Compressed Gas Technologies, Green Air Supply, Van Amerongen, Zhongrui, PSA Nitrogen”.
Scope Of The Report
Report Attributes
Report Details
Report Title
Nitrogen Generation Market Research Report
By Type
PSA Nitrogen Generators, Membrane Nitrogen Generators, The first step before the PSA process is compressed air passing through a combination of filters and an activated carbon tower with the purpose of removing dust, entrained oil and water. The purified air is then directed to one of two adsorption vessels that are packed with carbon molecular sieves (CMS). The remaining impurities such as carbon dioxide and residual moisture are adsorbed by the CMS at the entrance of the adsorbent bed., Gas flow is supplied under pressure into a bundle of membrane fibres. Due to the difference in partial pressures on the external and internal membrane surface, oxygen selectively permeates through the membrane allowing nitrogen to pass through at the desired purity level. Oxygen which concentrates on the external surface of the membrane is vented to the atmosphere by a portion of produced nitrogen.
By Application
Chemical & Petrochemical, Electronics, General Industrial, Food and Beverage, Others
By Companies
Air Liquide, Linde Engineering, Parker Hannifin, Peak Scientific, Atlas Copco, Praxair, Air Products & Chemicals, Taiyo Nippon Sanso, PCI Gases, Oxymat, Grasys, Inmatec Gase Technologie, Holtec Gas Systems, Kuraray, MVS Engineering, NOVAIR Noxerior, Sysadvance, Claind, AirSep, Rich, Absoger, On Site Gas Systems, Erredue, Mahler Ags, Isolcell, SMC, Generon, Air Water Bellpearl, South-Tek Systems, Fizz Dispense Optimization, Nano-Purification, Kofloc, Oxywise, Great Lakes Air, Shandong Gamma Gas Engineering, Titus, SAM GAS Projects, Advance Riken, Proton OnSite, FEDA Nitrogen, General Gas, Burns Machinery, Compressed Gas Technologies, Green Air Supply, Van Amerongen, Zhongrui, PSA Nitrogen
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
230
Number of Tables & Figures
161
Customization Available
Yes, the report can be customized as per your need.
Global Nitrogen Generation Market Report Segments:
The global Nitrogen Generation market is segmented on the basis of:
Types
PSA Nitrogen Generators, Membrane Nitrogen Generators, The first step before the PSA process is compressed air passing through a combination of filters and an activated carbon tower with the purpose of removing dust, entrained oil and water. The purified air is then directed to one of two adsorption vessels that are packed with carbon molecular sieves (CMS). The remaining impurities such as carbon dioxide and residual moisture are adsorbed by the CMS at the entrance of the adsorbent bed., Gas flow is supplied under pressure into a bundle of membrane fibres. Due to the difference in partial pressures on the external and internal membrane surface, oxygen selectively permeates through the membrane allowing nitrogen to pass through at the desired purity level. Oxygen which concentrates on the external surface of the membrane is vented to the atmosphere by a portion of produced nitrogen.
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Chemical & Petrochemical, Electronics, General Industrial, Food and Beverage, Others
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- Air Liquide
- Linde Engineering
- Parker Hannifin
- Peak Scientific
- Atlas Copco
- Praxair
- Air Products & Chemicals
- Taiyo Nippon Sanso
- PCI Gases
- Oxymat
- Grasys
- Inmatec Gase Technologie
- Holtec Gas Systems
- Kuraray
- MVS Engineering
- NOVAIR Noxerior
- Sysadvance
- Claind
- AirSep
- Rich
- Absoger
- On Site Gas Systems
- Erredue
- Mahler Ags
- Isolcell
- SMC
- Generon
- Air Water Bellpearl
- South-Tek Systems
- Fizz Dispense Optimization
- Nano-Purification
- Kofloc
- Oxywise
- Great Lakes Air
- Shandong Gamma Gas Engineering
- Titus
- SAM GAS Projects
- Advance Riken
- Proton OnSite
- FEDA Nitrogen
- General Gas
- Burns Machinery
- Compressed Gas Technologies
- Green Air Supply
- Van Amerongen
- Zhongrui
- PSA Nitrogen
Highlights of The Nitrogen Generation Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- PSA Nitrogen Generators
- Membrane Nitrogen Generators
- The first step before the PSA process is compressed air passing through a combination of filters and an activated carbon tower with the purpose of removing dust, entrained oil and water. The purified air is then directed to one of two adsorption vessels that are packed with carbon molecular sieves (CMS). The remaining impurities such as carbon dioxide and residual moisture are adsorbed by the CMS at the entrance of the adsorbent bed.
- Gas flow is supplied under pressure into a bundle of membrane fibres. Due to the difference in partial pressures on the external and internal membrane surface, oxygen selectively permeates through the membrane allowing nitrogen to pass through at the desired purity level. Oxygen which concentrates on the external surface of the membrane is vented to the atmosphere by a portion of produced nitrogen.
- By Application:
- Chemical & Petrochemical
- Electronics
- General Industrial
- Food and Beverage
- Others
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Nitrogen Generation Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
Nitrogen generation is the process of converting nitrogen gas into ammonia.
Some of the key players operating in the nitrogen generation market are Air Liquide, Linde Engineering, Parker Hannifin, Peak Scientific, Atlas Copco, Praxair, Air Products & Chemicals, Taiyo Nippon Sanso, PCI Gases, Oxymat, Grasys, Inmatec Gase Technologie, Holtec Gas Systems, Kuraray, MVS Engineering, NOVAIR Noxerior, Sysadvance, Claind, AirSep, Rich, Absoger, On Site Gas Systems, Erredue, Mahler Ags, Isolcell, SMC, Generon, Air Water Bellpearl, South-Tek Systems, Fizz Dispense Optimization, Nano-Purification, Kofloc, Oxywise, Great Lakes Air, Shandong Gamma Gas Engineering, Titus, SAM GAS Projects, Advance Riken, Proton OnSite, FEDA Nitrogen, General Gas, Burns Machinery, Compressed Gas Technologies, Green Air Supply, Van Amerongen, Zhongrui, PSA Nitrogen.
1. Executive Summary
2. Assumptions and Acronyms Used
3. Research Methodology
4. Nitrogen Generation Market Overview
4.1. Introduction
4.1.1. Market Taxonomy
4.1.2. Market Definition
4.2. Macro-Economic Factors
4.2.1. Industry Outlook
4.3. Nitrogen Generation Market Dynamics
4.3.1. Market Drivers
4.3.2. Market Restraints
4.3.3. Opportunity
4.3.4. Market Trends
4.4. Nitrogen Generation Market - Supply Chain
4.5. Global Nitrogen Generation Market Forecast
4.5.1. Nitrogen Generation Market Size (US$ Mn) and Y-o-Y Growth
4.5.2. Nitrogen Generation Market Size (000 Units) and Y-o-Y Growth
4.5.3. Nitrogen Generation Market Absolute $ Opportunity
5. Global Nitrogen Generation Market Analysis and Forecast by Type
5.1. Market Trends
5.2. Introduction
5.2.1. Basis Point Share (BPS) Analysis by Type
5.2.2. Y-o-Y Growth Projections by Type
5.3. Nitrogen Generation Market Size and Volume Forecast by Type
5.3.1. PSA Nitrogen Generators
5.3.2. Membrane Nitrogen Generators
5.3.3. The first step before the PSA process is compressed air passing through a combination of filters and an activated carbon tower with the purpose of removing dust, entrained oil and water. The purified air is then directed to one of two adsorption vessels that are packed with carbon molecular sieves (CMS). The remaining impurities such as carbon dioxide and residual moisture are adsorbed by the CMS at the entrance of the adsorbent bed.
5.3.4. Gas flow is supplied under pressure into a bundle of membrane fibres. Due to the difference in partial pressures on the external and internal membrane surface, oxygen selectively permeates through the membrane allowing nitrogen to pass through at the desired purity level. Oxygen which concentrates on the external surface of the membrane is vented to the atmosphere by a portion of produced nitrogen.
5.4. Absolute $ Opportunity Assessment by Type
5.5. Market Attractiveness/Growth Potential Analysis by Type
6. Global Nitrogen Generation Market Analysis and Forecast by Application
6.1. Market Trends
6.2. Introduction
6.2.1. Basis Point Share (BPS) Analysis by Application
6.2.2. Y-o-Y Growth Projections by Application
6.3. Nitrogen Generation Market Size and Volume Forecast by Application
6.3.1. Chemical & Petrochemical
6.3.2. Electronics
6.3.3. General Industrial
6.3.4. Food and Beverage
6.3.5. Others
6.4. Absolute $ Opportunity Assessment by Application
6.5. Market Attractiveness/Growth Potential Analysis by Application
7. Global Nitrogen Generation Market Analysis and Forecast by Sales Channel
7.1. Market Trends
7.2. Introduction
7.2.1. Basis Point Share (BPS) Analysis by Sales Channel
7.2.2. Y-o-Y Growth Projections by Sales Channel
7.3. Nitrogen Generation Market Size and Volume Forecast by Sales Channel
7.3.1. Manufacturer/Distributor/Service Provider
7.3.2. Aftermarket
7.4. Absolute $ Opportunity Assessment by Sales Channel
7.5. Market Attractiveness/Growth Potential Analysis by Sales Channel
8. Global Nitrogen Generation Market Analysis and Forecast by Region
8.1. Market Trends
8.2. Introduction
8.2.1. Basis Point Share (BPS) Analysis by Region
8.2.2. Y-o-Y Growth Projections by Region
8.3. Nitrogen Generation Market Size and Volume Forecast by Region
8.3.1. North America
8.3.2. Latin America
8.3.3. Europe
8.3.4. Asia Pacific
8.3.5. Middle East and Africa (MEA)
8.4. Absolute $ Opportunity Assessment by Region
8.5. Market Attractiveness/Growth Potential Analysis by Region
8.6. Global Nitrogen Generation Demand Share Forecast, 2019-2026
9. North America Nitrogen Generation Market Analysis and Forecast
9.1. Introduction
9.1.1. Basis Point Share (BPS) Analysis by Country
9.1.2. Y-o-Y Growth Projections by Country
9.2. North America Nitrogen Generation Market Size and Volume Forecast by Country
9.2.1. U.S.
9.2.2. Canada
9.3. Absolute $ Opportunity Assessment by Country
9.4. North America Nitrogen Generation Market Size and Volume Forecast by Application
9.4.1. Chemical & Petrochemical
9.4.2. Electronics
9.4.3. General Industrial
9.4.4. Food and Beverage
9.4.5. Others
9.5. Basis Point Share (BPS) Analysis by Application
9.6. Y-o-Y Growth Projections by Application
9.7. North America Nitrogen Generation Market Size and Volume Forecast by Type
9.7.1. PSA Nitrogen Generators
9.7.2. Membrane Nitrogen Generators
9.7.3. The first step before the PSA process is compressed air passing through a combination of filters and an activated carbon tower with the purpose of removing dust, entrained oil and water. The purified air is then directed to one of two adsorption vessels that are packed with carbon molecular sieves (CMS). The remaining impurities such as carbon dioxide and residual moisture are adsorbed by the CMS at the entrance of the adsorbent bed.
9.7.4. Gas flow is supplied under pressure into a bundle of membrane fibres. Due to the difference in partial pressures on the external and internal membrane surface, oxygen selectively permeates through the membrane allowing nitrogen to pass through at the desired purity level. Oxygen which concentrates on the external surface of the membrane is vented to the atmosphere by a portion of produced nitrogen.
9.8. Basis Point Share (BPS) Analysis by Type
9.9. Y-o-Y Growth Projections by Type
9.10. Market Attractiveness/Growth Potential Analysis
9.10.1. By Country
9.10.2. By Product Type
9.10.3. By Application
9.10.4. By Sales Channel
9.11. North America Nitrogen Generation Demand Share Forecast, 2019-2026
10. Latin America Nitrogen Generation Market Analysis and Forecast
10.1. Introduction
10.1.1. Basis Point Share (BPS) Analysis by Country
10.1.2. Y-o-Y Growth Projections by Country
10.1.3. Latin America Average Pricing Analysis
10.2. Latin America Nitrogen Generation Market Size and Volume Forecast by Country
10.2.1. Brazil
10.2.2. Mexico
10.2.3. Rest of Latin America
10.3. Absolute $ Opportunity Assessment by Country
10.4. Latin America Nitrogen Generation Market Size and Volume Forecast by Application
10.4.1. Chemical & Petrochemical
10.4.2. Electronics
10.4.3. General Industrial
10.4.4. Food and Beverage
10.4.5. Others
10.5. Basis Point Share (BPS) Analysis by Application
10.6. Y-o-Y Growth Projections by Application
10.7. Latin America Nitrogen Generation Market Size and Volume Forecast by Type
10.7.1. PSA Nitrogen Generators
10.7.2. Membrane Nitrogen Generators
10.7.3. The first step before the PSA process is compressed air passing through a combination of filters and an activated carbon tower with the purpose of removing dust, entrained oil and water. The purified air is then directed to one of two adsorption vessels that are packed with carbon molecular sieves (CMS). The remaining impurities such as carbon dioxide and residual moisture are adsorbed by the CMS at the entrance of the adsorbent bed.
10.7.4. Gas flow is supplied under pressure into a bundle of membrane fibres. Due to the difference in partial pressures on the external and internal membrane surface, oxygen selectively permeates through the membrane allowing nitrogen to pass through at the desired purity level. Oxygen which concentrates on the external surface of the membrane is vented to the atmosphere by a portion of produced nitrogen.
10.8. Basis Point Share (BPS) Analysis by Type
10.9. Y-o-Y Growth Projections by Type
10.10. Market Attractiveness/Growth Potential Analysis
10.10.1. By Country
10.10.2. By Product Type
10.10.3. By Application
10.10.4. By Sales Channel
10.11. Latin America Nitrogen Generation Demand Share Forecast, 2019-2026
11. Europe Nitrogen Generation Market Analysis and Forecast
11.1. Introduction
11.1.1. Basis Point Share (BPS) Analysis by Country
11.1.2. Y-o-Y Growth Projections by Country
11.1.3. Europe Average Pricing Analysis
11.2. Europe Nitrogen Generation Market Size and Volume Forecast by Country
11.2.1. Germany
11.2.2. France
11.2.3. Italy
11.2.4. U.K.
11.2.5. Spain
11.2.6. Russia
11.2.7. Rest of Europe
11.3. Absolute $ Opportunity Assessment by Country
11.4. Europe Nitrogen Generation Market Size and Volume Forecast by Application
11.4.1. Chemical & Petrochemical
11.4.2. Electronics
11.4.3. General Industrial
11.4.4. Food and Beverage
11.4.5. Others
11.5. Basis Point Share (BPS) Analysis by Application
11.6. Y-o-Y Growth Projections by Application
11.7. Europe Nitrogen Generation Market Size and Volume Forecast by Type
11.7.1. PSA Nitrogen Generators
11.7.2. Membrane Nitrogen Generators
11.7.3. The first step before the PSA process is compressed air passing through a combination of filters and an activated carbon tower with the purpose of removing dust, entrained oil and water. The purified air is then directed to one of two adsorption vessels that are packed with carbon molecular sieves (CMS). The remaining impurities such as carbon dioxide and residual moisture are adsorbed by the CMS at the entrance of the adsorbent bed.
11.7.4. Gas flow is supplied under pressure into a bundle of membrane fibres. Due to the difference in partial pressures on the external and internal membrane surface, oxygen selectively permeates through the membrane allowing nitrogen to pass through at the desired purity level. Oxygen which concentrates on the external surface of the membrane is vented to the atmosphere by a portion of produced nitrogen.
11.8. Basis Point Share (BPS) Analysis by Type
11.9. Y-o-Y Growth Projections by Type
11.10. Market Attractiveness/Growth Potential Analysis
11.10.1. By Country
11.10.2. By Product Type
11.10.3. By Application
11.10.4. By Sales Channel
11.11. Europe Nitrogen Generation Demand Share, 2019-2026
12. Asia Pacific Nitrogen Generation Market Analysis and Forecast
12.1. Introduction
12.1.1. Basis Point Share (BPS) Analysis by Country
12.1.2. Y-o-Y Growth Projections by Country
12.1.3. Asia Pacific Average Pricing Analysis
12.2. Asia Pacific Nitrogen Generation Market Size and Volume Forecast by Country
12.2.1. China
12.2.2. Japan
12.2.3. South Korea
12.2.4. India
12.2.5. Australia
12.2.6. Rest of Asia Pacific (APAC)
12.3. Absolute $ Opportunity Assessment by Country
12.4. Asia Pacific Nitrogen Generation Market Size and Volume Forecast by Application
12.4.1. Chemical & Petrochemical
12.4.2. Electronics
12.4.3. General Industrial
12.4.4. Food and Beverage
12.4.5. Others
12.5. Basis Point Share (BPS) Analysis by Application
12.6. Y-o-Y Growth Projections by Application
12.7. Asia Pacific Nitrogen Generation Market Size and Volume Forecast by Type
12.7.1. PSA Nitrogen Generators
12.7.2. Membrane Nitrogen Generators
12.7.3. The first step before the PSA process is compressed air passing through a combination of filters and an activated carbon tower with the purpose of removing dust, entrained oil and water. The purified air is then directed to one of two adsorption vessels that are packed with carbon molecular sieves (CMS). The remaining impurities such as carbon dioxide and residual moisture are adsorbed by the CMS at the entrance of the adsorbent bed.
12.7.4. Gas flow is supplied under pressure into a bundle of membrane fibres. Due to the difference in partial pressures on the external and internal membrane surface, oxygen selectively permeates through the membrane allowing nitrogen to pass through at the desired purity level. Oxygen which concentrates on the external surface of the membrane is vented to the atmosphere by a portion of produced nitrogen.
12.8. Basis Point Share (BPS) Analysis by Type
12.9. Y-o-Y Growth Projections by Type
12.10. Market Attractiveness/Growth Potential Analysis
12.10.1. By Country
12.10.2. By Product Type
12.10.3. By Application
12.10.4. By Sales Channel
12.11. Asia Pacific Nitrogen Generation Demand Share, 2019-2026
13. Middle East & Africa Nitrogen Generation Market Analysis and Forecast
13.1. Introduction
13.1.1. Basis Point Share (BPS) Analysis by Country
13.1.2. Y-o-Y Growth Projections by Country
13.1.3. Asia Pacific Average Pricing Analysis
13.2. Middle East & Africa Nitrogen Generation Market Size and Volume Forecast by Country
13.2.1. Saudi Arabia
13.2.2. South Africa
13.2.3. UAE
13.2.4. Rest of Middle East & Africa (MEA)
13.3. Absolute $ Opportunity Assessment by Country
13.4. Middle East & Africa Nitrogen Generation Market Size and Volume Forecast by Application
13.4.1. Chemical & Petrochemical
13.4.2. Electronics
13.4.3. General Industrial
13.4.4. Food and Beverage
13.4.5. Others
13.5. Basis Point Share (BPS) Analysis by Application
13.6. Y-o-Y Growth Projections by Application
13.7. Middle East & Africa Nitrogen Generation Market Size and Volume Forecast by Type
13.7.1. PSA Nitrogen Generators
13.7.2. Membrane Nitrogen Generators
13.7.3. The first step before the PSA process is compressed air passing through a combination of filters and an activated carbon tower with the purpose of removing dust, entrained oil and water. The purified air is then directed to one of two adsorption vessels that are packed with carbon molecular sieves (CMS). The remaining impurities such as carbon dioxide and residual moisture are adsorbed by the CMS at the entrance of the adsorbent bed.
13.7.4. Gas flow is supplied under pressure into a bundle of membrane fibres. Due to the difference in partial pressures on the external and internal membrane surface, oxygen selectively permeates through the membrane allowing nitrogen to pass through at the desired purity level. Oxygen which concentrates on the external surface of the membrane is vented to the atmosphere by a portion of produced nitrogen.
13.8. Basis Point Share (BPS) Analysis by Type
13.9. Y-o-Y Growth Projections by Type
13.10. Market Attractiveness/Growth Potential Analysis
13.10.1. By Country
13.10.2. By Product Type
13.10.3. By Application
13.10.4. By Sales Channel
13.11. Middle East & Africa Nitrogen Generation Demand Share, 2019-2026
14. Competition Landscape
14.1. Global Nitrogen Generation Market: Market Share Analysis
14.2. Nitrogen Generation Distributors and Customers
14.3. Nitrogen Generation Market: Competitive Dashboard
14.4. Company Profiles (Details Overview, Financials, Developments, Strategy)
14.4.1. Air Liquide
14.4.1.1. Overview
14.4.1.2. Financials
14.4.1.3. Developments
14.4.1.4. Strategic Outlook
14.4.2. Linde Engineering
14.4.2.1. Overview
14.4.2.2. Financials
14.4.2.3. Developments
14.4.2.4. Strategic Outlook
14.4.3. Parker Hannifin
14.4.3.1. Overview
14.4.3.2. Financials
14.4.3.3. Developments
14.4.3.4. Strategic Outlook
14.4.4. Peak Scientific
14.4.4.1. Overview
14.4.4.2. Financials
&
