Market Overview:
The global rebar bending machines market is expected to grow at a CAGR of 5.5% during the forecast period from 2018 to 2030. The growth in the market can be attributed to the increasing demand for steel products from various end-use industries, such as construction and engineering. Additionally, the growing demand for electric rebar benders is also contributing to the growth of this market. However, factors such as high installation and maintenance costs may restrain the growth of this market during the forecast period. On basis of type, manual rebar benders are expected to dominate the global rebar bending machines market during 2018-2030 owing to their low installation and maintenance costs as compared to electric rebar benders.
Product Definition:
A rebar bending machine is a tool that is used to bend steel bars into various shapes. This is important because it helps reinforce the concrete that is being used in construction projects.
Manual Rebar Bender:
Manual rebar bender is a device used to bend or form the bars in reinforced concrete. The machine consists of two main parts, namely the upper block and lower block. These blocks are mounted on a frame and hydraulic system is attached to it which allows them to move forward and backward along with vertical movement.
Electric Rebar Bender:
Electric rebar bender is a machine used for bending or forming steel bars in construction industry. It’s basically an automated device that uses electric current to heat and shape the metal bars according to the desired dimensions. The working principle of electric rebar bender is very simple, it consists of two parts; heating element and bar former which are connected by insulated wires.
Application Insights:
The steel product manufacturers application segment accounted for the largest market share in 2017 and is anticipated to continue its dominance over the forecast period. The use of rebar bending machines by steel product manufacturers allows them to produce standard and customized products as per the requirements of various end-use industries.
The construction/engineering contractors application segment is expected to witness a CAGR of XX% from 2018 to 2030 owing to an increase in infrastructure development activities across the globe, especially in developing countries such as China, India, Brazil etc., which are likely to contribute towards Rebar Bending Machine (RBM) demand over the forecast period.
In addition, increasing penetration into R&D activities relatedto new technologies used for manufacturing reinforced concrete componentsis projecteded drive innovation & development trends duringthe study period thereby contributingtowards growth opportunitiesfor Rebar BendingMachines (RBM).
Regional Analysis:
Asia Pacific is expected to be the fastest-growing regional market with a CAGR of XX% from 2018 to 2030 owing to increasing infrastructure activities in emerging economies such as China and India. In addition, rising demand for steel products in developing countries will drive the global rebar bending machines market over the forecast period.
Europe accounted for more than 25% of the overall revenue share in 2017 on account of high product adoption across numerous applications including construction and engineering structures among others. The region is characterized by stringent regulations regarding environment protection coupled with growing awareness about energy conservation, which are anticipated to result in increased product adoption over the coming years.
The Middle East & Africa (MEA) region is projected to witness significant growth during the forecast period owing its large population base along with rapidly expanding construction industry due primarilyto rapid urbanization resulting from immigration into major cities such as Dubai.
Growth Factors:
- Increasing demand for rebar bending machines from the construction industry as it helps in faster and efficient construction of buildings and other infrastructure projects.
- Rising demand for rebar bending machines from the automotive industry as it helps in fabricating automobile parts such as frames, chassis, etc. quickly and efficiently.
- Growing popularity of automated rebar bending machines that offer high accuracy and speed compared to manual ones. This is expected to boost the growth of the market during the forecast period.
- Increasing investments by leading players in research & development activities to develop innovative products that can cater to the changing needs of consumers is expected to propel the growth of this market in future years5 Increased awareness about benefits offered by rebar bending machines among consumers is anticipated to fuel its demand over next few years
Scope Of The Report
Report Attributes
Report Details
Report Title
Rebar Bending Machines Market Research Report
By Type
Manual Rebar Bender, Electric Rebar Bender
By Application
Steel Product Manufacturers, Construction/Engineering Contractors, Others
By Companies
Schnell Spa, Jaypee Group, Gensco Equipment, EVG Entwicklungs-und Verwertungs, KRB Machinery, Eurobend, PEDAX, Ltd, Toyo Kensetsu Kohki, Ellsen Bending Machine, SIMPEDIL SRL, GALANOS S.A., MEP Group, Progress Maschinen & Automation, DARHUNG Inc, Henan Sinch Machinery, TJK Machinery (Tianjin), Chengdu Gute Machinery Works
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
237
Number of Tables & Figures
166
Customization Available
Yes, the report can be customized as per your need.
Global Rebar Bending Machines Market Report Segments:
The global Rebar Bending Machines market is segmented on the basis of:
Types
Manual Rebar Bender, Electric Rebar Bender
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Steel Product Manufacturers, Construction/Engineering Contractors, Others
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- Schnell Spa
- Jaypee Group
- Gensco Equipment
- EVG Entwicklungs-und Verwertungs
- KRB Machinery
- Eurobend
- PEDAX, Ltd
- Toyo Kensetsu Kohki
- Ellsen Bending Machine
- SIMPEDIL SRL
- GALANOS S.A.
- MEP Group
- Progress Maschinen & Automation
- DARHUNG Inc
- Henan Sinch Machinery
- TJK Machinery (Tianjin)
- Chengdu Gute Machinery Works
Highlights of The Rebar Bending Machines Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- Manual Rebar Bender
- Electric Rebar Bender
- By Application:
- Steel Product Manufacturers
- Construction/Engineering Contractors
- Others
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Rebar Bending Machines Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
Rebar bending machines are used to bend rebar in a controlled manner. They are also known as wire rod bending machines. Rebars can be made from a variety of materials, including steel, aluminum, and plastic.
Some of the major companies in the rebar bending machines market are Schnell Spa, Jaypee Group, Gensco Equipment, EVG Entwicklungs-und Verwertungs, KRB Machinery, Eurobend, PEDAX, Ltd, Toyo Kensetsu Kohki, Ellsen Bending Machine, SIMPEDIL SRL, GALANOS S.A., MEP Group, Progress Maschinen & Automation, DARHUNG Inc, Henan Sinch Machinery, TJK Machinery (Tianjin), Chengdu Gute Machinery Works.
The rebar bending machines market is expected to register a CAGR of 5.5%.
1. Executive Summary
2. Assumptions and Acronyms Used
3. Research Methodology
4. Rebar Bending Machines Market Overview
4.1. Introduction
4.1.1. Market Taxonomy
4.1.2. Market Definition
4.2. Macro-Economic Factors
4.2.1. Industry Outlook
4.3. Rebar Bending Machines Market Dynamics
4.3.1. Market Drivers
4.3.2. Market Restraints
4.3.3. Opportunity
4.3.4. Market Trends
4.4. Rebar Bending Machines Market - Supply Chain
4.5. Global Rebar Bending Machines Market Forecast
4.5.1. Rebar Bending Machines Market Size (US$ Mn) and Y-o-Y Growth
4.5.2. Rebar Bending Machines Market Size (000 Units) and Y-o-Y Growth
4.5.3. Rebar Bending Machines Market Absolute $ Opportunity
5. Global Rebar Bending Machines Market Analysis and Forecast by Type
5.1. Market Trends
5.2. Introduction
5.2.1. Basis Point Share (BPS) Analysis by Type
5.2.2. Y-o-Y Growth Projections by Type
5.3. Rebar Bending Machines Market Size and Volume Forecast by Type
5.3.1. Manual Rebar Bender
5.3.2. Electric Rebar Bender
5.4. Absolute $ Opportunity Assessment by Type
5.5. Market Attractiveness/Growth Potential Analysis by Type
6. Global Rebar Bending Machines Market Analysis and Forecast by Application
6.1. Market Trends
6.2. Introduction
6.2.1. Basis Point Share (BPS) Analysis by Application
6.2.2. Y-o-Y Growth Projections by Application
6.3. Rebar Bending Machines Market Size and Volume Forecast by Application
6.3.1. Steel Product Manufacturers
6.3.2. Construction/Engineering Contractors
6.3.3. Others
6.4. Absolute $ Opportunity Assessment by Application
6.5. Market Attractiveness/Growth Potential Analysis by Application
7. Global Rebar Bending Machines Market Analysis and Forecast by Sales Channel
7.1. Market Trends
7.2. Introduction
7.2.1. Basis Point Share (BPS) Analysis by Sales Channel
7.2.2. Y-o-Y Growth Projections by Sales Channel
7.3. Rebar Bending Machines Market Size and Volume Forecast by Sales Channel
7.3.1. Manufacturer/Distributor/Service Provider
7.3.2. Aftermarket
7.4. Absolute $ Opportunity Assessment by Sales Channel
7.5. Market Attractiveness/Growth Potential Analysis by Sales Channel
8. Global Rebar Bending Machines Market Analysis and Forecast by Region
8.1. Market Trends
8.2. Introduction
8.2.1. Basis Point Share (BPS) Analysis by Region
8.2.2. Y-o-Y Growth Projections by Region
8.3. Rebar Bending Machines Market Size and Volume Forecast by Region
8.3.1. North America
8.3.2. Latin America
8.3.3. Europe
8.3.4. Asia Pacific
8.3.5. Middle East and Africa (MEA)
8.4. Absolute $ Opportunity Assessment by Region
8.5. Market Attractiveness/Growth Potential Analysis by Region
8.6. Global Rebar Bending Machines Demand Share Forecast, 2019-2026
9. North America Rebar Bending Machines Market Analysis and Forecast
9.1. Introduction
9.1.1. Basis Point Share (BPS) Analysis by Country
9.1.2. Y-o-Y Growth Projections by Country
9.2. North America Rebar Bending Machines Market Size and Volume Forecast by Country
9.2.1. U.S.
9.2.2. Canada
9.3. Absolute $ Opportunity Assessment by Country
9.4. North America Rebar Bending Machines Market Size and Volume Forecast by Application
9.4.1. Steel Product Manufacturers
9.4.2. Construction/Engineering Contractors
9.4.3. Others
9.5. Basis Point Share (BPS) Analysis by Application
9.6. Y-o-Y Growth Projections by Application
9.7. North America Rebar Bending Machines Market Size and Volume Forecast by Type
9.7.1. Manual Rebar Bender
9.7.2. Electric Rebar Bender
9.8. Basis Point Share (BPS) Analysis by Type
9.9. Y-o-Y Growth Projections by Type
9.10. Market Attractiveness/Growth Potential Analysis
9.10.1. By Country
9.10.2. By Product Type
9.10.3. By Application
9.10.4. By Sales Channel
9.11. North America Rebar Bending Machines Demand Share Forecast, 2019-2026
10. Latin America Rebar Bending Machines Market Analysis and Forecast
10.1. Introduction
10.1.1. Basis Point Share (BPS) Analysis by Country
10.1.2. Y-o-Y Growth Projections by Country
10.1.3. Latin America Average Pricing Analysis
10.2. Latin America Rebar Bending Machines Market Size and Volume Forecast by Country
10.2.1. Brazil
10.2.2. Mexico
10.2.3. Rest of Latin America
10.3. Absolute $ Opportunity Assessment by Country
10.4. Latin America Rebar Bending Machines Market Size and Volume Forecast by Application
10.4.1. Steel Product Manufacturers
10.4.2. Construction/Engineering Contractors
10.4.3. Others
10.5. Basis Point Share (BPS) Analysis by Application
10.6. Y-o-Y Growth Projections by Application
10.7. Latin America Rebar Bending Machines Market Size and Volume Forecast by Type
10.7.1. Manual Rebar Bender
10.7.2. Electric Rebar Bender
10.8. Basis Point Share (BPS) Analysis by Type
10.9. Y-o-Y Growth Projections by Type
10.10. Market Attractiveness/Growth Potential Analysis
10.10.1. By Country
10.10.2. By Product Type
10.10.3. By Application
10.10.4. By Sales Channel
10.11. Latin America Rebar Bending Machines Demand Share Forecast, 2019-2026
11. Europe Rebar Bending Machines Market Analysis and Forecast
11.1. Introduction
11.1.1. Basis Point Share (BPS) Analysis by Country
11.1.2. Y-o-Y Growth Projections by Country
11.1.3. Europe Average Pricing Analysis
11.2. Europe Rebar Bending Machines Market Size and Volume Forecast by Country
11.2.1. Germany
11.2.2. France
11.2.3. Italy
11.2.4. U.K.
11.2.5. Spain
11.2.6. Russia
11.2.7. Rest of Europe
11.3. Absolute $ Opportunity Assessment by Country
11.4. Europe Rebar Bending Machines Market Size and Volume Forecast by Application
11.4.1. Steel Product Manufacturers
11.4.2. Construction/Engineering Contractors
11.4.3. Others
11.5. Basis Point Share (BPS) Analysis by Application
11.6. Y-o-Y Growth Projections by Application
11.7. Europe Rebar Bending Machines Market Size and Volume Forecast by Type
11.7.1. Manual Rebar Bender
11.7.2. Electric Rebar Bender
11.8. Basis Point Share (BPS) Analysis by Type
11.9. Y-o-Y Growth Projections by Type
11.10. Market Attractiveness/Growth Potential Analysis
11.10.1. By Country
11.10.2. By Product Type
11.10.3. By Application
11.10.4. By Sales Channel
11.11. Europe Rebar Bending Machines Demand Share, 2019-2026
12. Asia Pacific Rebar Bending Machines Market Analysis and Forecast
12.1. Introduction
12.1.1. Basis Point Share (BPS) Analysis by Country
12.1.2. Y-o-Y Growth Projections by Country
12.1.3. Asia Pacific Average Pricing Analysis
12.2. Asia Pacific Rebar Bending Machines Market Size and Volume Forecast by Country
12.2.1. China
12.2.2. Japan
12.2.3. South Korea
12.2.4. India
12.2.5. Australia
12.2.6. Rest of Asia Pacific (APAC)
12.3. Absolute $ Opportunity Assessment by Country
12.4. Asia Pacific Rebar Bending Machines Market Size and Volume Forecast by Application
12.4.1. Steel Product Manufacturers
12.4.2. Construction/Engineering Contractors
12.4.3. Others
12.5. Basis Point Share (BPS) Analysis by Application
12.6. Y-o-Y Growth Projections by Application
12.7. Asia Pacific Rebar Bending Machines Market Size and Volume Forecast by Type
12.7.1. Manual Rebar Bender
12.7.2. Electric Rebar Bender
12.8. Basis Point Share (BPS) Analysis by Type
12.9. Y-o-Y Growth Projections by Type
12.10. Market Attractiveness/Growth Potential Analysis
12.10.1. By Country
12.10.2. By Product Type
12.10.3. By Application
12.10.4. By Sales Channel
12.11. Asia Pacific Rebar Bending Machines Demand Share, 2019-2026
13. Middle East & Africa Rebar Bending Machines Market Analysis and Forecast
13.1. Introduction
13.1.1. Basis Point Share (BPS) Analysis by Country
13.1.2. Y-o-Y Growth Projections by Country
13.1.3. Asia Pacific Average Pricing Analysis
13.2. Middle East & Africa Rebar Bending Machines Market Size and Volume Forecast by Country
13.2.1. Saudi Arabia
13.2.2. South Africa
13.2.3. UAE
13.2.4. Rest of Middle East & Africa (MEA)
13.3. Absolute $ Opportunity Assessment by Country
13.4. Middle East & Africa Rebar Bending Machines Market Size and Volume Forecast by Application
13.4.1. Steel Product Manufacturers
13.4.2. Construction/Engineering Contractors
13.4.3. Others
13.5. Basis Point Share (BPS) Analysis by Application
13.6. Y-o-Y Growth Projections by Application
13.7. Middle East & Africa Rebar Bending Machines Market Size and Volume Forecast by Type
13.7.1. Manual Rebar Bender
13.7.2. Electric Rebar Bender
13.8. Basis Point Share (BPS) Analysis by Type
13.9. Y-o-Y Growth Projections by Type
13.10. Market Attractiveness/Growth Potential Analysis
13.10.1. By Country
13.10.2. By Product Type
13.10.3. By Application
13.10.4. By Sales Channel
13.11. Middle East & Africa Rebar Bending Machines Demand Share, 2019-2026
14. Competition Landscape
14.1. Global Rebar Bending Machines Market: Market Share Analysis
14.2. Rebar Bending Machines Distributors and Customers
14.3. Rebar Bending Machines Market: Competitive Dashboard
14.4. Company Profiles (Details Overview, Financials, Developments, Strategy)
14.4.1. Schnell Spa
14.4.1.1. Overview
14.4.1.2. Financials
14.4.1.3. Developments
14.4.1.4. Strategic Outlook
14.4.2. Jaypee Group
14.4.2.1. Overview
14.4.2.2. Financials
14.4.2.3. Developments
14.4.2.4. Strategic Outlook
14.4.3. Gensco Equipment
14.4.3.1. Overview
14.4.3.2. Financials
14.4.3.3. Developments
14.4.3.4. Strategic Outlook
14.4.4. EVG Entwicklungs-und Verwertungs
14.4.4.1. Overview
14.4.4.2. Financials
14.4.4.3. Developments
14.4.4.4. Strategic Outlook
14.4.5. KRB Machinery
14.4.5.1. Overview
14.4.5.2. Financials
14.4.5.3. Developments
14.4.5.4. Strategic Outlook
14.4.6. Eurobend
14.4.6.1. Overview
14.4.6.2. Financials
14.4.6.3. Developments
14.4.6.4. Strategic Outlook
14.4.7. PEDAX, Ltd
14.4.7.1. Overview
14.4.7.2. Financials
14.4.7.3. Developments
14.4.7.4. Strategic Outlook
14.4.8. Toyo Kensetsu Kohki
14.4.8.1. Overview
14.4.8.2. Financials
14.4.8.3. Developments
14.4.8.4. Strategic Outlook
14.4.9. Ellsen Bending Machine
14.4.9.1. Overview
14.4.9.2. Financials
14.4.9.3. Developments
14.4.9.4. Strategic Outlook
14.4.10. SIMPEDIL SRL
14.4.10.1. Overview
14.4.10.2. Financials
14.4.10.3. Developments
14.4.10.4. Strategic Outlook
14.4.11. GALANOS S.A.
14.4.11.1. Overview
14.4.11.2. Financials
14.4.11.3. Developments
14.4.11.4. Strategic Outlook
14.4.12. MEP Group
14.4.12.1. Overview
14.4.12.2. Financials
14.4.12.3. Developments
14.4.12.4. Strategic Outlook
14.4.13. Progress Maschinen & Automation
14.4.13.1. Overview
14.4.13.2. Financials
14.4.13.3. Developments
14.4.13.4. Strategic Outlook
14.4.14. DARHUNG Inc
14.4.14.1. Overview
14.4.14.2. Financials
14.4.14.3. Developments
14.4.14.4. Strategic Outlook
14.4.15. Henan Sinch Machinery
14.4.15.1. Overview
14.4.15.2. Financials
14.4.15.3. Developments
14.4.15.4. Strategic Outlook
14.4.16. TJK Machinery (Tianjin)
14.4.16.1. Overview
14.4.16.2. Financials
14.4.16.3. Developments
14.4.16.4. Strategic Outlook
14.4.17. Chengdu Gute Machinery Works
14.4.17.1. Overview
14.4.17.2. Financials
14.4.17.3. Developments
14.4.17.4. Strategic Outlook
14.4.18. COMPANY 18
14.4.18.1. Overview
14.4.18.2. Financials
14.4.18.3. Developments
14.4.18.4. Strategic Outlook
14.4.19. COMPANY 19
14.4.19.1. Overview
14.4.19.2. Financials
14.4.19.3. Developments
14.4.19.4. Strategic Outlook
14.4.20. COMPANY 20
14.4.20.1. Overview
14.4.20.2. Financials
14.4.20.3. Developments
14.4.20.4. Strategic Outlook