Market Overview:
The global rotor spinning machinery market is expected to grow at a CAGR of 5.5% during the forecast period from 2018 to 2030. The growth in the rotor spinning machinery market can be attributed to the increasing demand for synthetic fibres and plant fibres across the globe. Additionally, rising disposable income and changing lifestyle preferences are also fuelling the demand for rotor spinning machinery. Based on type, self-venting type accounted for a major share of the global rotor spinning machinery market in 2017. This segment is expected to maintain its dominance during the forecast period owing to its low maintenance requirements and easy installation process.
Product Definition:
Rotor spinning machinery is a type of equipment used in the textile industry to produce yarn. It consists of a large, cylindrical rotor that spins at high speeds, and small spindles attached to the rotor that hold the thread. The yarn is spun by feeding it into the small spindles, and as the rotor spins, it wraps the thread around itself. Rotor spinning machinery is important because it is one of the most efficient ways to produce yarn.
Self-venting Type:
Self-venting type is a kind of rotary vane gas turbine which uses the flow of gases as its power source. The working principle is based on the differential compression between two blades, one blade acts as a seal and prevents the entry of outside air while other performs intake stroke. As speed increases, so does pressure difference between both these seals and thus produces more power output.
Pumping Type:
Pumping type is used in the rotor spinning machinery to increase the speed of a liquid or gas by artificial means. The pumping type can be broadly segmented into two types which are reciprocating and centrifugal. Centrifugal pumping is widely used as compared to reciprocating owing to its advantages such as high efficiency, low cost, less power requirement and easy installation among others.
Rotor spinning machines use both centrifugal.
Application Insights:
The plant-based application segment led the global market in 2017 and is projected to expand at a CAGR of XX% over the forecast period. Increasing demand for plant-based products, such as carpets, rugs and mats is expected to drive the product demand over the next eight years.
The synthetic-based applications segment was valued at USD 1,818.5 million in 2017 owing to increasing use of polyester filaments for manufacturing automobile tires and tubes which are further used across several end-use industries including automotive & transportation and construction sectors globally. The growth of these end-use industries has been significantly driven by rising disposable income levels coupled with population expansion that has resulted in an increased production rate globally thus driving industry growth over recent years (see Table 1).
Regional Analysis:
Asia Pacific dominated the global rotor spinning machinery market in 2017. The region is expected to witness significant growth over the forecast period owing to increasing demand for textile and synthetic fibres from various end-use industries such as textiles, apparel, footwear, bags and shoes. In addition, rising disposable income coupled with rapid urbanization in emerging countries such as China and India is anticipated to fuel the product demand further.
The Asia Pacific regional market was followed by Europe which accounted for a share of more than 20% in 2017 owing to high consumption of spun yarns from various applications including textiles, automotive interior materials (heating & air conditioning), medical fabrics (garments), technical fabrics etc. North America also contributed significantly towards global industry growth due to growing application sectors across U.S.
Growth Factors:
- Increasing demand from textile and apparel industry
- Rising demand for high-quality yarns
- Technological advancements in rotor spinning machinery
- Growing popularity of synthetic fibers over natural fibers
- Expansion of global fiber and textile markets
Scope Of The Report
Report Attributes
Report Details
Report Title
Rotor Spinning Machinery Market Research Report
By Type
Self-venting Type, Pumping Type
By Application
Synthetic Fibres, Plant Fibres, Others
By Companies
Saurer, Rieter, Murata Machinery, Toyota Textile Machinery, Trutzschler, Lakshmi Machine Works, JINGWEI, Savio Macchine Tessili, Zhejiang Taitan, Rifa, ATE, Marzoli Spinning Solutions, Chunrui Machinery
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
233
Number of Tables & Figures
164
Customization Available
Yes, the report can be customized as per your need.
Global Rotor Spinning Machinery Market Report Segments:
The global Rotor Spinning Machinery market is segmented on the basis of:
Types
Self-venting Type, Pumping Type
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Synthetic Fibres, Plant Fibres, Others
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- Saurer
- Rieter
- Murata Machinery
- Toyota Textile Machinery
- Trutzschler
- Lakshmi Machine Works
- JINGWEI
- Savio Macchine Tessili
- Zhejiang Taitan
- Rifa
- ATE
- Marzoli Spinning Solutions
- Chunrui Machinery
Highlights of The Rotor Spinning Machinery Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- Self-venting Type
- Pumping Type
- By Application:
- Synthetic Fibres
- Plant Fibres
- Others
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Rotor Spinning Machinery Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
Rotor spinning machinery is a type of industrial machinery that uses rotors to turn. This type of machinery is used in a variety of industries, including manufacturing, agriculture, and construction. Rotor spinning machines are often used to produce textiles and other materials.
Some of the major companies in the rotor spinning machinery market are Saurer, Rieter, Murata Machinery, Toyota Textile Machinery, Trutzschler, Lakshmi Machine Works, JINGWEI, Savio Macchine Tessili, Zhejiang Taitan, Rifa, ATE, Marzoli Spinning Solutions, Chunrui Machinery.
The rotor spinning machinery market is expected to register a CAGR of 5.5%.
1. Executive Summary
2. Assumptions and Acronyms Used
3. Research Methodology
4. Rotor Spinning Machinery Market Overview
4.1. Introduction
4.1.1. Market Taxonomy
4.1.2. Market Definition
4.2. Macro-Economic Factors
4.2.1. Industry Outlook
4.3. Rotor Spinning Machinery Market Dynamics
4.3.1. Market Drivers
4.3.2. Market Restraints
4.3.3. Opportunity
4.3.4. Market Trends
4.4. Rotor Spinning Machinery Market - Supply Chain
4.5. Global Rotor Spinning Machinery Market Forecast
4.5.1. Rotor Spinning Machinery Market Size (US$ Mn) and Y-o-Y Growth
4.5.2. Rotor Spinning Machinery Market Size (000 Units) and Y-o-Y Growth
4.5.3. Rotor Spinning Machinery Market Absolute $ Opportunity
5. Global Rotor Spinning Machinery Market Analysis and Forecast by Type
5.1. Market Trends
5.2. Introduction
5.2.1. Basis Point Share (BPS) Analysis by Type
5.2.2. Y-o-Y Growth Projections by Type
5.3. Rotor Spinning Machinery Market Size and Volume Forecast by Type
5.3.1. Self-venting Type
5.3.2. Pumping Type
5.4. Absolute $ Opportunity Assessment by Type
5.5. Market Attractiveness/Growth Potential Analysis by Type
6. Global Rotor Spinning Machinery Market Analysis and Forecast by Application
6.1. Market Trends
6.2. Introduction
6.2.1. Basis Point Share (BPS) Analysis by Application
6.2.2. Y-o-Y Growth Projections by Application
6.3. Rotor Spinning Machinery Market Size and Volume Forecast by Application
6.3.1. Synthetic Fibres
6.3.2. Plant Fibres
6.3.3. Others
6.4. Absolute $ Opportunity Assessment by Application
6.5. Market Attractiveness/Growth Potential Analysis by Application
7. Global Rotor Spinning Machinery Market Analysis and Forecast by Sales Channel
7.1. Market Trends
7.2. Introduction
7.2.1. Basis Point Share (BPS) Analysis by Sales Channel
7.2.2. Y-o-Y Growth Projections by Sales Channel
7.3. Rotor Spinning Machinery Market Size and Volume Forecast by Sales Channel
7.3.1. Manufacturer/Distributor/Service Provider
7.3.2. Aftermarket
7.4. Absolute $ Opportunity Assessment by Sales Channel
7.5. Market Attractiveness/Growth Potential Analysis by Sales Channel
8. Global Rotor Spinning Machinery Market Analysis and Forecast by Region
8.1. Market Trends
8.2. Introduction
8.2.1. Basis Point Share (BPS) Analysis by Region
8.2.2. Y-o-Y Growth Projections by Region
8.3. Rotor Spinning Machinery Market Size and Volume Forecast by Region
8.3.1. North America
8.3.2. Latin America
8.3.3. Europe
8.3.4. Asia Pacific
8.3.5. Middle East and Africa (MEA)
8.4. Absolute $ Opportunity Assessment by Region
8.5. Market Attractiveness/Growth Potential Analysis by Region
8.6. Global Rotor Spinning Machinery Demand Share Forecast, 2019-2026
9. North America Rotor Spinning Machinery Market Analysis and Forecast
9.1. Introduction
9.1.1. Basis Point Share (BPS) Analysis by Country
9.1.2. Y-o-Y Growth Projections by Country
9.2. North America Rotor Spinning Machinery Market Size and Volume Forecast by Country
9.2.1. U.S.
9.2.2. Canada
9.3. Absolute $ Opportunity Assessment by Country
9.4. North America Rotor Spinning Machinery Market Size and Volume Forecast by Application
9.4.1. Synthetic Fibres
9.4.2. Plant Fibres
9.4.3. Others
9.5. Basis Point Share (BPS) Analysis by Application
9.6. Y-o-Y Growth Projections by Application
9.7. North America Rotor Spinning Machinery Market Size and Volume Forecast by Type
9.7.1. Self-venting Type
9.7.2. Pumping Type
9.8. Basis Point Share (BPS) Analysis by Type
9.9. Y-o-Y Growth Projections by Type
9.10. Market Attractiveness/Growth Potential Analysis
9.10.1. By Country
9.10.2. By Product Type
9.10.3. By Application
9.10.4. By Sales Channel
9.11. North America Rotor Spinning Machinery Demand Share Forecast, 2019-2026
10. Latin America Rotor Spinning Machinery Market Analysis and Forecast
10.1. Introduction
10.1.1. Basis Point Share (BPS) Analysis by Country
10.1.2. Y-o-Y Growth Projections by Country
10.1.3. Latin America Average Pricing Analysis
10.2. Latin America Rotor Spinning Machinery Market Size and Volume Forecast by Country
10.2.1. Brazil
10.2.2. Mexico
10.2.3. Rest of Latin America
10.3. Absolute $ Opportunity Assessment by Country
10.4. Latin America Rotor Spinning Machinery Market Size and Volume Forecast by Application
10.4.1. Synthetic Fibres
10.4.2. Plant Fibres
10.4.3. Others
10.5. Basis Point Share (BPS) Analysis by Application
10.6. Y-o-Y Growth Projections by Application
10.7. Latin America Rotor Spinning Machinery Market Size and Volume Forecast by Type
10.7.1. Self-venting Type
10.7.2. Pumping Type
10.8. Basis Point Share (BPS) Analysis by Type
10.9. Y-o-Y Growth Projections by Type
10.10. Market Attractiveness/Growth Potential Analysis
10.10.1. By Country
10.10.2. By Product Type
10.10.3. By Application
10.10.4. By Sales Channel
10.11. Latin America Rotor Spinning Machinery Demand Share Forecast, 2019-2026
11. Europe Rotor Spinning Machinery Market Analysis and Forecast
11.1. Introduction
11.1.1. Basis Point Share (BPS) Analysis by Country
11.1.2. Y-o-Y Growth Projections by Country
11.1.3. Europe Average Pricing Analysis
11.2. Europe Rotor Spinning Machinery Market Size and Volume Forecast by Country
11.2.1. Germany
11.2.2. France
11.2.3. Italy
11.2.4. U.K.
11.2.5. Spain
11.2.6. Russia
11.2.7. Rest of Europe
11.3. Absolute $ Opportunity Assessment by Country
11.4. Europe Rotor Spinning Machinery Market Size and Volume Forecast by Application
11.4.1. Synthetic Fibres
11.4.2. Plant Fibres
11.4.3. Others
11.5. Basis Point Share (BPS) Analysis by Application
11.6. Y-o-Y Growth Projections by Application
11.7. Europe Rotor Spinning Machinery Market Size and Volume Forecast by Type
11.7.1. Self-venting Type
11.7.2. Pumping Type
11.8. Basis Point Share (BPS) Analysis by Type
11.9. Y-o-Y Growth Projections by Type
11.10. Market Attractiveness/Growth Potential Analysis
11.10.1. By Country
11.10.2. By Product Type
11.10.3. By Application
11.10.4. By Sales Channel
11.11. Europe Rotor Spinning Machinery Demand Share, 2019-2026
12. Asia Pacific Rotor Spinning Machinery Market Analysis and Forecast
12.1. Introduction
12.1.1. Basis Point Share (BPS) Analysis by Country
12.1.2. Y-o-Y Growth Projections by Country
12.1.3. Asia Pacific Average Pricing Analysis
12.2. Asia Pacific Rotor Spinning Machinery Market Size and Volume Forecast by Country
12.2.1. China
12.2.2. Japan
12.2.3. South Korea
12.2.4. India
12.2.5. Australia
12.2.6. Rest of Asia Pacific (APAC)
12.3. Absolute $ Opportunity Assessment by Country
12.4. Asia Pacific Rotor Spinning Machinery Market Size and Volume Forecast by Application
12.4.1. Synthetic Fibres
12.4.2. Plant Fibres
12.4.3. Others
12.5. Basis Point Share (BPS) Analysis by Application
12.6. Y-o-Y Growth Projections by Application
12.7. Asia Pacific Rotor Spinning Machinery Market Size and Volume Forecast by Type
12.7.1. Self-venting Type
12.7.2. Pumping Type
12.8. Basis Point Share (BPS) Analysis by Type
12.9. Y-o-Y Growth Projections by Type
12.10. Market Attractiveness/Growth Potential Analysis
12.10.1. By Country
12.10.2. By Product Type
12.10.3. By Application
12.10.4. By Sales Channel
12.11. Asia Pacific Rotor Spinning Machinery Demand Share, 2019-2026
13. Middle East & Africa Rotor Spinning Machinery Market Analysis and Forecast
13.1. Introduction
13.1.1. Basis Point Share (BPS) Analysis by Country
13.1.2. Y-o-Y Growth Projections by Country
13.1.3. Asia Pacific Average Pricing Analysis
13.2. Middle East & Africa Rotor Spinning Machinery Market Size and Volume Forecast by Country
13.2.1. Saudi Arabia
13.2.2. South Africa
13.2.3. UAE
13.2.4. Rest of Middle East & Africa (MEA)
13.3. Absolute $ Opportunity Assessment by Country
13.4. Middle East & Africa Rotor Spinning Machinery Market Size and Volume Forecast by Application
13.4.1. Synthetic Fibres
13.4.2. Plant Fibres
13.4.3. Others
13.5. Basis Point Share (BPS) Analysis by Application
13.6. Y-o-Y Growth Projections by Application
13.7. Middle East & Africa Rotor Spinning Machinery Market Size and Volume Forecast by Type
13.7.1. Self-venting Type
13.7.2. Pumping Type
13.8. Basis Point Share (BPS) Analysis by Type
13.9. Y-o-Y Growth Projections by Type
13.10. Market Attractiveness/Growth Potential Analysis
13.10.1. By Country
13.10.2. By Product Type
13.10.3. By Application
13.10.4. By Sales Channel
13.11. Middle East & Africa Rotor Spinning Machinery Demand Share, 2019-2026
14. Competition Landscape
14.1. Global Rotor Spinning Machinery Market: Market Share Analysis
14.2. Rotor Spinning Machinery Distributors and Customers
14.3. Rotor Spinning Machinery Market: Competitive Dashboard
14.4. Company Profiles (Details Overview, Financials, Developments, Strategy)
14.4.1. Saurer
14.4.1.1. Overview
14.4.1.2. Financials
14.4.1.3. Developments
14.4.1.4. Strategic Outlook
14.4.2. Rieter
14.4.2.1. Overview
14.4.2.2. Financials
14.4.2.3. Developments
14.4.2.4. Strategic Outlook
14.4.3. Murata Machinery
14.4.3.1. Overview
14.4.3.2. Financials
14.4.3.3. Developments
14.4.3.4. Strategic Outlook
14.4.4. Toyota Textile Machinery
14.4.4.1. Overview
14.4.4.2. Financials
14.4.4.3. Developments
14.4.4.4. Strategic Outlook
14.4.5. Trutzschler
14.4.5.1. Overview
14.4.5.2. Financials
14.4.5.3. Developments
14.4.5.4. Strategic Outlook
14.4.6. Lakshmi Machine Works
14.4.6.1. Overview
14.4.6.2. Financials
14.4.6.3. Developments
14.4.6.4. Strategic Outlook
14.4.7. JINGWEI
14.4.7.1. Overview
14.4.7.2. Financials
14.4.7.3. Developments
14.4.7.4. Strategic Outlook
14.4.8. Savio Macchine Tessili
14.4.8.1. Overview
14.4.8.2. Financials
14.4.8.3. Developments
14.4.8.4. Strategic Outlook
14.4.9. Zhejiang Taitan
14.4.9.1. Overview
14.4.9.2. Financials
14.4.9.3. Developments
14.4.9.4. Strategic Outlook
14.4.10. Rifa
14.4.10.1. Overview
14.4.10.2. Financials
14.4.10.3. Developments
14.4.10.4. Strategic Outlook
14.4.11. ATE
14.4.11.1. Overview
14.4.11.2. Financials
14.4.11.3. Developments
14.4.11.4. Strategic Outlook
14.4.12. Marzoli Spinning Solutions
14.4.12.1. Overview
14.4.12.2. Financials
14.4.12.3. Developments
14.4.12.4. Strategic Outlook
14.4.13. Chunrui Machinery
14.4.13.1. Overview
14.4.13.2. Financials
14.4.13.3. Developments
14.4.13.4. Strategic Outlook
14.4.14. COMPANY 14
14.4.14.1. Overview
14.4.14.2. Financials
14.4.14.3. Developments
14.4.14.4. Strategic Outlook
14.4.15. COMPANY 15
14.4.15.1. Overview
14.4.15.2. Financials
14.4.15.3. Developments
14.4.15.4. Strategic Outlook
14.4.16. COMPANY 16
14.4.16.1. Overview
14.4.16.2. Financials
14.4.16.3. Developments
14.4.16.4. Strategic Outlook
14.4.17. COMPANY 17
14.4.17.1. Overview
14.4.17.2. Financials
14.4.17.3. Developments
14.4.17.4. Strategic Outlook
14.4.18. COMPANY 18
14.4.18.1. Overview
14.4.18.2. Financials
14.4.18.3. Developments
14.4.18.4. Strategic Outlook
14.4.19. COMPANY 19
14.4.19.1. Overview
14.4.19.2. Financials
14.4.19.3. Developments
14.4.19.4. Strategic Outlook
14.4.20. COMPANY 20
14.4.20.1. Overview
14.4.20.2. Financials
14.4.20.3. Developments
14.4.20.4. Strategic Outlook
