Market Overview:
The global rubber-internal mixer market is segmented on the basis of type, application, and region. The type segment includes end faces of the rotor, rotor teeth and whether or not, rotor speed, rotor speed change or not, mixing capacity and rotor speed score. The application segment includes experiment, shoes, tire electronics accessories cable. The region segment includes North America Latin America Europe Asia Pacific and Middle East & Africa. The global rubber-internal mixer market is expected to grow at a CAGR of 5% during the forecast period from 2018 to 2030. Some of the major factors that are expected to drive the growth of this market include increasing demand for rubber products from various industries such as automotive and transportation etc., growing awareness about safety among consumers regarding usage of tires in vehicles etc.
Product Definition:
A rubber-internal mixer is a device used to mix rubber compounds. The importance of a rubber-internal mixer is that it allows for the thorough mixing of the ingredients in a rubber compound, which leads to improved quality and consistency.
End faces of the rotor:
The end faces of the rotor, it's usage and growth factor in Rubber-internal Mixer market is expected to witness significant growth over the forecast period. The rubber-based internal mixers are used for processing various types of rubber products such as natural and synthetic rubbers, nitrile butadiene styrene (NBS) and acrylonitrile butadiene styrene (ABS).
Rotor teeth and whether or not:
Rotor teeth are small serrated surfaces that are used to mix the rubber with air in order to obtain high speed and low torque performance from the mixer. The main objective of using rotor teeth is to break up the air into a spinning mass, thus making it easier for the impeller. The breaking up of air into a spinning mass helps in increasing power output by reducing friction between rotating parts which results in increased efficiency.
Application Insights:
The experiment application segment led the global rubber-internal mixer market in 2017. This can be attributed to the rising demand for laboratory equipment and instruments. Rubber-internal mixers are used in experiments to provide consistent, high quality and efficient mixing performance. The increasing number of science laboratories at schools and colleges across the globe is expected to boost product demand over the forecast period.
Regional Analysis:
Asia Pacific dominated the global market in 2017 and is expected to continue its dominance over the forecast period. The region accounted for a volume share of 68.1% in 2017, which can be attributed to increasing demand from end-use industries such as electronics, automotive, and experiment. Rubber-IMMs are used across several industries due to their superior properties such as lightweight & high strength with low power consumption compared to metal IMMs.
Growth Factors:
- Increasing demand for rubber products from automotive and construction industries
- Growing awareness about the benefits of rubber-internal mixers among end users
- Technological advancements in rubber-internal mixer design and manufacturing process
- Rising demand for customized rubber-internal mixers to meet specific application requirements
- Growing number of small and medium scale enterprises adopting rubber-internal mixers for production
Scope Of The Report
Report Attributes
Report Details
Report Title
Rubber-internal Mixer Market Research Report
By Type
End faces of the rotor, Rotor teeth and whether or not, Rotor speed, Rotor speed change or not, Mixing capacity, Rotor speed score
By Application
Experiment, Shoes, Tire, Electronics accessories, Cable
By Companies
HF Group, KOBE STEEL, Comerio Ercole SPA, Dalian Rubber and Plastics, Yiyang Rubber and Plastics, Doublestar, Sichuan Yaxi Rubber & Plastic Machine, Dalian CanMade Rubber&Plastics Machinery, Double Elephant Rubber & Plastics, Huahan Rubber & Plastics, Dalian Second Rubber & Plastics, Wuxi Sanjiang Machinery, Shun Cheong Machinery, Rixin Rubber & Plastic
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
233
Number of Tables & Figures
164
Customization Available
Yes, the report can be customized as per your need.
Global Rubber-internal Mixer Market Report Segments:
The global Rubber-internal Mixer market is segmented on the basis of:
Types
End faces of the rotor, Rotor teeth and whether or not, Rotor speed, Rotor speed change or not, Mixing capacity, Rotor speed score
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Experiment, Shoes, Tire, Electronics accessories, Cable
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- HF Group
- KOBE STEEL
- Comerio Ercole SPA
- Dalian Rubber and Plastics
- Yiyang Rubber and Plastics
- Doublestar
- Sichuan Yaxi Rubber & Plastic Machine
- Dalian CanMade Rubber&Plastics Machinery
- Double Elephant Rubber & Plastics
- Huahan Rubber & Plastics
- Dalian Second Rubber & Plastics
- Wuxi Sanjiang Machinery
- Shun Cheong Machinery
- Rixin Rubber & Plastic
Highlights of The Rubber-internal Mixer Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- End faces of the rotor
- Rotor teeth and whether or not
- Rotor speed
- Rotor speed change or not
- Mixing capacity
- Rotor speed score
- By Application:
- Experiment
- Shoes
- Tire
- Electronics accessories
- Cable
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Rubber-internal Mixer Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
A rubber-internal mixer is a type of mixer that uses internal rubber belts to mix materials. This type of mixer is often used in manufacturing plants to mix various types of materials, such as plastics and resins.
Some of the major companies in the rubber-internal mixer market are HF Group, KOBE STEEL, Comerio Ercole SPA, Dalian Rubber and Plastics, Yiyang Rubber and Plastics, Doublestar, Sichuan Yaxi Rubber & Plastic Machine, Dalian CanMade Rubber&Plastics Machinery, Double Elephant Rubber & Plastics, Huahan Rubber & Plastics, Dalian Second Rubber & Plastics, Wuxi Sanjiang Machinery, Shun Cheong Machinery, Rixin Rubber & Plastic.
The rubber-internal mixer market is expected to grow at a compound annual growth rate of 5%.
1. Executive Summary
2. Assumptions and Acronyms Used
3. Research Methodology
4. Rubber-internal Mixer Market Overview
4.1. Introduction
4.1.1. Market Taxonomy
4.1.2. Market Definition
4.2. Macro-Economic Factors
4.2.1. Industry Outlook
4.3. Rubber-internal Mixer Market Dynamics
4.3.1. Market Drivers
4.3.2. Market Restraints
4.3.3. Opportunity
4.3.4. Market Trends
4.4. Rubber-internal Mixer Market - Supply Chain
4.5. Global Rubber-internal Mixer Market Forecast
4.5.1. Rubber-internal Mixer Market Size (US$ Mn) and Y-o-Y Growth
4.5.2. Rubber-internal Mixer Market Size (000 Units) and Y-o-Y Growth
4.5.3. Rubber-internal Mixer Market Absolute $ Opportunity
5. Global Rubber-internal Mixer Market Analysis and Forecast by Type
5.1. Market Trends
5.2. Introduction
5.2.1. Basis Point Share (BPS) Analysis by Type
5.2.2. Y-o-Y Growth Projections by Type
5.3. Rubber-internal Mixer Market Size and Volume Forecast by Type
5.3.1. End faces of the rotor
5.3.2. Rotor teeth and whether or not
5.3.3. Rotor speed
5.3.4. Rotor speed change or not
5.3.5. Mixing capacity
5.3.6. Rotor speed score
5.4. Absolute $ Opportunity Assessment by Type
5.5. Market Attractiveness/Growth Potential Analysis by Type
6. Global Rubber-internal Mixer Market Analysis and Forecast by Application
6.1. Market Trends
6.2. Introduction
6.2.1. Basis Point Share (BPS) Analysis by Application
6.2.2. Y-o-Y Growth Projections by Application
6.3. Rubber-internal Mixer Market Size and Volume Forecast by Application
6.3.1. Experiment
6.3.2. Shoes
6.3.3. Tire
6.3.4. Electronics accessories
6.3.5. Cable
6.4. Absolute $ Opportunity Assessment by Application
6.5. Market Attractiveness/Growth Potential Analysis by Application
7. Global Rubber-internal Mixer Market Analysis and Forecast by Sales Channel
7.1. Market Trends
7.2. Introduction
7.2.1. Basis Point Share (BPS) Analysis by Sales Channel
7.2.2. Y-o-Y Growth Projections by Sales Channel
7.3. Rubber-internal Mixer Market Size and Volume Forecast by Sales Channel
7.3.1. Manufacturer/Distributor/Service Provider
7.3.2. Aftermarket
7.4. Absolute $ Opportunity Assessment by Sales Channel
7.5. Market Attractiveness/Growth Potential Analysis by Sales Channel
8. Global Rubber-internal Mixer Market Analysis and Forecast by Region
8.1. Market Trends
8.2. Introduction
8.2.1. Basis Point Share (BPS) Analysis by Region
8.2.2. Y-o-Y Growth Projections by Region
8.3. Rubber-internal Mixer Market Size and Volume Forecast by Region
8.3.1. North America
8.3.2. Latin America
8.3.3. Europe
8.3.4. Asia Pacific
8.3.5. Middle East and Africa (MEA)
8.4. Absolute $ Opportunity Assessment by Region
8.5. Market Attractiveness/Growth Potential Analysis by Region
8.6. Global Rubber-internal Mixer Demand Share Forecast, 2019-2026
9. North America Rubber-internal Mixer Market Analysis and Forecast
9.1. Introduction
9.1.1. Basis Point Share (BPS) Analysis by Country
9.1.2. Y-o-Y Growth Projections by Country
9.2. North America Rubber-internal Mixer Market Size and Volume Forecast by Country
9.2.1. U.S.
9.2.2. Canada
9.3. Absolute $ Opportunity Assessment by Country
9.4. North America Rubber-internal Mixer Market Size and Volume Forecast by Application
9.4.1. Experiment
9.4.2. Shoes
9.4.3. Tire
9.4.4. Electronics accessories
9.4.5. Cable
9.5. Basis Point Share (BPS) Analysis by Application
9.6. Y-o-Y Growth Projections by Application
9.7. North America Rubber-internal Mixer Market Size and Volume Forecast by Type
9.7.1. End faces of the rotor
9.7.2. Rotor teeth and whether or not
9.7.3. Rotor speed
9.7.4. Rotor speed change or not
9.7.5. Mixing capacity
9.7.6. Rotor speed score
9.8. Basis Point Share (BPS) Analysis by Type
9.9. Y-o-Y Growth Projections by Type
9.10. Market Attractiveness/Growth Potential Analysis
9.10.1. By Country
9.10.2. By Product Type
9.10.3. By Application
9.10.4. By Sales Channel
9.11. North America Rubber-internal Mixer Demand Share Forecast, 2019-2026
10. Latin America Rubber-internal Mixer Market Analysis and Forecast
10.1. Introduction
10.1.1. Basis Point Share (BPS) Analysis by Country
10.1.2. Y-o-Y Growth Projections by Country
10.1.3. Latin America Average Pricing Analysis
10.2. Latin America Rubber-internal Mixer Market Size and Volume Forecast by Country
10.2.1. Brazil
10.2.2. Mexico
10.2.3. Rest of Latin America
10.3. Absolute $ Opportunity Assessment by Country
10.4. Latin America Rubber-internal Mixer Market Size and Volume Forecast by Application
10.4.1. Experiment
10.4.2. Shoes
10.4.3. Tire
10.4.4. Electronics accessories
10.4.5. Cable
10.5. Basis Point Share (BPS) Analysis by Application
10.6. Y-o-Y Growth Projections by Application
10.7. Latin America Rubber-internal Mixer Market Size and Volume Forecast by Type
10.7.1. End faces of the rotor
10.7.2. Rotor teeth and whether or not
10.7.3. Rotor speed
10.7.4. Rotor speed change or not
10.7.5. Mixing capacity
10.7.6. Rotor speed score
10.8. Basis Point Share (BPS) Analysis by Type
10.9. Y-o-Y Growth Projections by Type
10.10. Market Attractiveness/Growth Potential Analysis
10.10.1. By Country
10.10.2. By Product Type
10.10.3. By Application
10.10.4. By Sales Channel
10.11. Latin America Rubber-internal Mixer Demand Share Forecast, 2019-2026
11. Europe Rubber-internal Mixer Market Analysis and Forecast
11.1. Introduction
11.1.1. Basis Point Share (BPS) Analysis by Country
11.1.2. Y-o-Y Growth Projections by Country
11.1.3. Europe Average Pricing Analysis
11.2. Europe Rubber-internal Mixer Market Size and Volume Forecast by Country
11.2.1. Germany
11.2.2. France
11.2.3. Italy
11.2.4. U.K.
11.2.5. Spain
11.2.6. Russia
11.2.7. Rest of Europe
11.3. Absolute $ Opportunity Assessment by Country
11.4. Europe Rubber-internal Mixer Market Size and Volume Forecast by Application
11.4.1. Experiment
11.4.2. Shoes
11.4.3. Tire
11.4.4. Electronics accessories
11.4.5. Cable
11.5. Basis Point Share (BPS) Analysis by Application
11.6. Y-o-Y Growth Projections by Application
11.7. Europe Rubber-internal Mixer Market Size and Volume Forecast by Type
11.7.1. End faces of the rotor
11.7.2. Rotor teeth and whether or not
11.7.3. Rotor speed
11.7.4. Rotor speed change or not
11.7.5. Mixing capacity
11.7.6. Rotor sped score
11.8. Basis Point Share (BPS) Analysis by Type
11.9. Y-o-Y Growth Projections by Type
11.10. Market Attractiveness/Growth Potential Analysis
11.10.1. By Country
11.10.2. By Product Type
11.10.3. By Application
11.10.4. By Sales Channel
11.11. Europe Rubber-internal Mixer Demand Share, 2019-2026
12. Asia Pacific Rubber-internal Mixer Market Analysis and Forecast
12.1. Introduction
12.1.1. Basis Point Share (BPS) Analysis by Country
12.1.2. Y-o-Y Growth Projections by Country
12.1.3. Asia Pacific Average Pricing Analysis
12.2. Asia Pacific Rubber-internal Mixer Market Size and Volume Forecast by Country
12.2.1. China
12.2.2. Japan
12.2.3. South Korea
12.2.4. India
12.2.5. Australia
12.2.6. Rest of Asia Pacific (APAC)
12.3. Absolute $ Opportunity Assessment by Country
12.4. Asia Pacific Rubber-internal Mixer Market Size and Volume Forecast by Application
12.4.1. Experiment
12.4.2. Shoes
12.4.3. Tire
12.4.4. Electronics accessories
12.4.5. Cable
12.5. Basis Point Share (BPS) Analysis by Application
12.6. Y-o-Y Growth Projections by Application
12.7. Asia Pacific Rubber-internal Mixer Market Size and Volume Forecast by Type
12.7.1. End faces of the rotor
12.7.2. Rotor teeth and whether or not
12.7.3. Rotor speed
12.7.4. Rotor speed change or not
12.7.5. Mixing capacity
12.7.6. Rotor speed score
12.8. Basis Point Share (BPS) Analysis by Type
12.9. Y-o-Y Growth Projections by Type
12.10. Market Attractiveness/Growth Potential Analysis
12.10.1. By Country
12.10.2. By Product Type
12.10.3. By Application
12.10.4. By Sales Channel
12.11. Asia Pacific Rubber-internal Mixer Demand Share, 2019-2026
13. Middle East & Africa Rubber-internal Mixer Market Analysis and Forecast
13.1. Introduction
13.1.1. Basis Point Share (BPS) Analysis by Country
13.1.2. Y-o-Y Growth Projections by Country
13.1.3. Asia Pacific Average Pricing Analysis
13.2. Middle East & Africa Rubber-internal Mixer Market Size and Volume Forecast by Country
13.2.1. Saudi Arabia
13.2.2. South Africa
13.2.3. UAE
13.2.4. Rest of Middle East & Africa (MEA)
13.3. Absolute $ Opportunity Assessment by Country
13.4. Middle East & Africa Rubber-internal Mixer Market Size and Volume Forecast by Application
13.4.1. Experiment
13.4.2. Shoes
13.4.3. Tire
13.4.4. Electronics accessories
13.4.5. Cable
13.5. Basis Point Share (BPS) Analysis by Application
13.6. Y-o-Y Growth Projections by Application
13.7. Middle East & Africa Rubber-internal Mixer Market Size and Volume Forecast by Type
13.7.1. End faces of the rotor
13.7.2. Rotor teeth and whether or not
13.7.3. Rotor speed
13.7.4. Rotor speed change or not
13.7.5. Mixing capacity
13.7.6. Rotor speed score
13.8. Basis Point Share (BPS) Analysis by Type
13.9. Y-o-Y Growth Projections by Type
13.10. Market Attractiveness/Growth Potential Analysis
13.10.1. By Country
13.10.2. By Product Type
13.10.3. By Application
13.10.4. By Sales Channel
13.11. Middle East & Africa Rubber-internal Mixer Demand Share, 2019-2026
14. Competition Landscape
14.1. Global Rubber-internal Mixer Market: Market Share Analysis
14.2. Rubber-internal Mixer Distributors and Customers
14.3. Rubber-internal Mixer Market: Competitive Dashboard
14.4. Company Profiles (Details Overview, Financials, Developments, Strategy)
14.4.1. HF Group
14.4.1.1. Overview
14.4.1.2. Financials
14.4.1.3. Developments
14.4.1.4. Strategic Outlook
14.4.2. KOBE STEEL
14.4.2.1. Overview
14.4.2.2. Financials
14.4.2.3. Developments
14.4.2.4. Strategic Outlook
14.4.3. Comerio Ercole SPA
14.4.3.1. Overview
14.4.3.2. Financials
14.4.3.3. Developments
14.4.3.4. Strategic Outlook
14.4.4. Dalian Rubber and Plastics
14.4.4.1. Overview
14.4.4.2. Financials
14.4.4.3. Developments
14.4.4.4. Strategic Outlook
14.4.5. Yiyang Rubber and Plastics
14.4.5.1. Overview
14.4.5.2. Financials
14.4.5.3. Developments
14.4.5.4. Strategic Outlook
14.4.6. Doublestar
14.4.6.1. Overview
14.4.6.2. Financials
14.4.6.3. Developments
14.4.6.4. Strategic Outlook
14.4.7. Sichuan Yaxi Rubber & Plastic Machine
14.4.7.1. Overview
14.4.7.2. Financials
14.4.7.3. Developments
14.4.7.4. Strategic Outlook
14.4.8. Dalian CanMade Rubber&Plastics Machinery
14.4.8.1. Overview
14.4.8.2. Financials
14.4.8.3. Developments
14.4.8.4. Strategic Outlook
14.4.9. Double Elephant Rubber & Plastics
14.4.9.1. Overview
14.4.9.2. Financials
14.4.9.3. Developments
14.4.9.4. Strategic Outlook
14.4.10. Huahan Rubber & Plastics
14.4.10.1. Overview
14.4.10.2. Financials
14.4.10.3. Developments
14.4.10.4. Strategic Outlook
14.4.11. Dalian Second Rubber & Plastics
14.4.11.1. Overview
14.4.11.2. Financials
14.4.11.3. Developments
14.4.11.4. Strategic Outlook
14.4.12. Wuxi Sanjiang Machinery
14.4.12.1. Overview
14.4.12.2. Financials
14.4.12.3. Developments
14.4.12.4. Strategic Outlook
14.4.13. Shun Cheong Machinery
14.4.13.1. Overview
14.4.13.2. Financials
14.4.13.3. Developments
14.4.13.4. Strategic Outlook
14.4.14. Rixin Rubber & Plastic
14.4.14.1. Overview
14.4.14.2. Financials
14.4.14.3. Developments
14.4.14.4. Strategic Outlook
14.4.15. COMPANY 15
14.4.15.1. Overview
14.4.15.2. Financials
14.4.15.3. Developments
14.4.15.4. Strategic Outlook
14.4.16. COMPANY 16
14.4.16.1. Overview
14.4.16.2. Financials
14.4.16.3. Developments
14.4.16.4. Strategic Outlook
14.4.17. COMPANY 17
14.4.17.1. Overview
14.4.17.2. Financials
14.4.17.3. Developments
14.4.17.4. Strategic Outlook
14.4.18. COMPANY 18
14.4.18.1. Overview
14.4.18.2. Financials
14.4.18.3. Developments
14.4.18.4. Strategic Outlook
14.4.19. COMPANY 19
14.4.19.1. Overview
14.4.19.2. Financials
14.4.19.3. Developments
14.4.19.4. Strategic Outlook
14.4.20. COMPANY 20
14.4.20.1. Overview
14.4.20.2. Financials
14.4.20.3. Developments
14.4.20.4. Strategic Outlook
