Market Overview:
The global Soldering Fume Extractor market is expected to register a CAGR of 6.5% during the forecast period, 2018-2030. The growth of the market can be attributed to the increasing demand for Soldering Fume Extractor from the electronics industry and general industry. In 2018, the Multi-Operator segment has the least share in the market, about 12.6%. But it is estimated to register the highest CAGR, in terms of value, ofthe overall Soldering Fume Extractor market.
Product Definition:
A Soldering Fume Extractor is a device that removes harmful fumes and particles from the air. They are important because they protect workers from the health hazards associated with soldering.
Single Operator:
Single operator is a device used to extract smoke and fumes from soldering operations. It works by introducing a stream of clean air into the soldering environment, which forces out the unwanted fumes and smoke produced during electrical connections. The Single Operator has been gaining popularity in recent years owing to its ability to remove both types of contaminants found in large quantities in electronics manufacturing facilities.
The increasing demand for electronic devices globally is expected to drive market growth over the forecast period.
Double Operator:
Double operator is a device used in soldering fume extractors. It consists of two independent channels which are operated simultaneously to draw fumes away from the area. One channel is usually mounted on top and other below the unit. The channels are connected by a flexible hose which can be bent or straightened to direct fumes towards the exhaust port or away from it according to requirement.
Application Insights:
The electronics industry was the largest application segment in 2017 and is expected to continue its dominance during the forecast period. The growth of this segment can be attributed to increasing demand for electronic devices, such as smartphones, tablets, laptops among others. In addition, technological advancements coupled with growing consumer preference are further driving the market growth in this application segment.
General industry is estimated to register a CAGR of XX% from 2018 to 2030 owing to rising demand for fume extractors from various industries including automotive and aerospace where high-quality soldering operations are required frequently. Furthermore, due largely industrialization countries such as China India Japan South Korea Taiwan Thailand etc., these types of equipment have become affordable for small and medium-sized businesses (SMBs). This factor has led SMBs across different regions into investing more on Soldering Fume Extractor Systems which will eventually drive product demand over the next few years.
Regional Analysis:
Asia Pacific is expected to be the largest market, in terms of both volume and revenue. The growth of the Asia Pacific region can be attributed to rapid industrialization and urbanization resulting in an increasing population with higher purchasing power. Moreover, rising demand for consumer electronics such as smartphones and laptops has been fueling the regional market growth over the past few years.
The Asia Pacific region is also home to several emerging economies including China, India, Indonesia etc., which are among the top 10 producers of electronic components globally; thus making it a key manufacturing hub for various industry players across industries such as automotive (trucks), aerospace & defense (aircraft) and others. This scenario is further anticipated to drive regional product demand during forecast period.
Growth Factors:
- Increasing demand from the electronics and semiconductor industry for soldering fumes extractors to protect workers from the harmful effects of solder fumes.
- Growing awareness among workers about the health hazards associated with solder fumes and the need for protection.
- Stringent government regulations on worker safety that mandate the use of soldering fume extractors in workplaces where soldering is done.
- The increasing popularity of lead-free solder, which produces less harmful fumes than traditional lead-based solder, driving demand forsoldering fume extractors.
Scope Of The Report
Report Attributes
Report Details
Report Title
Soldering Fume Extractor Market Research Report
By Type
Single Operator, Double Operator, Multi-Operator, In 2018?the Multi-Operator has the least share in the market,about 12.6%.But it is estimated to register the highest CAGR, in terms of value, of the overall Soldering Fume Extractor market. The growth of the Multi-Operator segment is expected to continue during the forecast period due to the increasing demand for Soldering Fume Extractor.
By Application
Electronics Industry, General Industry
By Companies
BOFA, Metcal, Weller, Kurtz Ersa, Hakko, FUMEX, ULT, Quick, Quatro-air, Sentry Air Systems, Sunyada, Boorex, Qubo, Goodoop, Conyson, Pace
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
248
Number of Tables & Figures
174
Customization Available
Yes, the report can be customized as per your need.
Global Soldering Fume Extractor Market Report Segments:
The global Soldering Fume Extractor market is segmented on the basis of:
Types
Single Operator, Double Operator, Multi-Operator, In 2018?the Multi-Operator has the least share in the market,about 12.6%.But it is estimated to register the highest CAGR, in terms of value, of the overall Soldering Fume Extractor market. The growth of the Multi-Operator segment is expected to continue during the forecast period due to the increasing demand for Soldering Fume Extractor.
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Electronics Industry, General Industry
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- BOFA
- Metcal
- Weller
- Kurtz Ersa
- Hakko
- FUMEX
- ULT
- Quick
- Quatro-air
- Sentry Air Systems
- Sunyada
- Boorex
- Qubo
- Goodoop
- Conyson
- Pace
Highlights of The Soldering Fume Extractor Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- Single Operator
- Double Operator
- Multi-Operator
- In 2018?the Multi-Operator has the least share in the market,about 12.6%.But it is estimated to register the highest CAGR, in terms of value, of the overall Soldering Fume Extractor market. The growth of the Multi-Operator segment is expected to continue during the forecast period due to the increasing demand for Soldering Fume Extractor.
- By Application:
- Electronics Industry
- General Industry
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Soldering Fume Extractor Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
A soldering fumes extractor is a device used to remove harmful fumes from a work area. It typically consists of an exhaust system that vents the fumes outside, and a filter that removes the harmful particles.
Some of the key players operating in the soldering fume extractor market are BOFA, Metcal, Weller, Kurtz Ersa, Hakko, FUMEX, ULT, Quick, Quatro-air, Sentry Air Systems, Sunyada, Boorex, Qubo, Goodoop, Conyson, Pace.
The soldering fume extractor market is expected to grow at a compound annual growth rate of 6.5%.
1. Executive Summary
2. Assumptions and Acronyms Used
3. Research Methodology
4. Soldering Fume Extractor Market Overview
4.1. Introduction
4.1.1. Market Taxonomy
4.1.2. Market Definition
4.2. Macro-Economic Factors
4.2.1. Industry Outlook
4.3. Soldering Fume Extractor Market Dynamics
4.3.1. Market Drivers
4.3.2. Market Restraints
4.3.3. Opportunity
4.3.4. Market Trends
4.4. Soldering Fume Extractor Market - Supply Chain
4.5. Global Soldering Fume Extractor Market Forecast
4.5.1. Soldering Fume Extractor Market Size (US$ Mn) and Y-o-Y Growth
4.5.2. Soldering Fume Extractor Market Size (000 Units) and Y-o-Y Growth
4.5.3. Soldering Fume Extractor Market Absolute $ Opportunity
5. Global Soldering Fume Extractor Market Analysis and Forecast by Type
5.1. Market Trends
5.2. Introduction
5.2.1. Basis Point Share (BPS) Analysis by Type
5.2.2. Y-o-Y Growth Projections by Type
5.3. Soldering Fume Extractor Market Size and Volume Forecast by Type
5.3.1. Single Operator
5.3.2. Double Operator
5.3.3. Multi-Operator
5.3.4. In 2018?the Multi-Operator has the least share in the market,about 12.6%.But it is estimated to register the highest CAGR, in terms of value, of the overall Soldering Fume Extractor market. The growth of the Multi-Operator segment is expected to continue during the forecast period due to the increasing demand for Soldering Fume Extractor.
5.4. Absolute $ Opportunity Assessment by Type
5.5. Market Attractiveness/Growth Potential Analysis by Type
6. Global Soldering Fume Extractor Market Analysis and Forecast by Application
6.1. Market Trends
6.2. Introduction
6.2.1. Basis Point Share (BPS) Analysis by Application
6.2.2. Y-o-Y Growth Projections by Application
6.3. Soldering Fume Extractor Market Size and Volume Forecast by Application
6.3.1. Electronics Industry
6.3.2. General Industry
6.4. Absolute $ Opportunity Assessment by Application
6.5. Market Attractiveness/Growth Potential Analysis by Application
7. Global Soldering Fume Extractor Market Analysis and Forecast by Sales Channel
7.1. Market Trends
7.2. Introduction
7.2.1. Basis Point Share (BPS) Analysis by Sales Channel
7.2.2. Y-o-Y Growth Projections by Sales Channel
7.3. Soldering Fume Extractor Market Size and Volume Forecast by Sales Channel
7.3.1. Manufacturer/Distributor/Service Provider
7.3.2. Aftermarket
7.4. Absolute $ Opportunity Assessment by Sales Channel
7.5. Market Attractiveness/Growth Potential Analysis by Sales Channel
8. Global Soldering Fume Extractor Market Analysis and Forecast by Region
8.1. Market Trends
8.2. Introduction
8.2.1. Basis Point Share (BPS) Analysis by Region
8.2.2. Y-o-Y Growth Projections by Region
8.3. Soldering Fume Extractor Market Size and Volume Forecast by Region
8.3.1. North America
8.3.2. Latin America
8.3.3. Europe
8.3.4. Asia Pacific
8.3.5. Middle East and Africa (MEA)
8.4. Absolute $ Opportunity Assessment by Region
8.5. Market Attractiveness/Growth Potential Analysis by Region
8.6. Global Soldering Fume Extractor Demand Share Forecast, 2019-2026
9. North America Soldering Fume Extractor Market Analysis and Forecast
9.1. Introduction
9.1.1. Basis Point Share (BPS) Analysis by Country
9.1.2. Y-o-Y Growth Projections by Country
9.2. North America Soldering Fume Extractor Market Size and Volume Forecast by Country
9.2.1. U.S.
9.2.2. Canada
9.3. Absolute $ Opportunity Assessment by Country
9.4. North America Soldering Fume Extractor Market Size and Volume Forecast by Application
9.4.1. Electronics Industry
9.4.2. General Industry
9.5. Basis Point Share (BPS) Analysis by Application
9.6. Y-o-Y Growth Projections by Application
9.7. North America Soldering Fume Extractor Market Size and Volume Forecast by Type
9.7.1. Single Operator
9.7.2. Double Operator
9.7.3. Multi-Operator
9.7.4. In 2018?the Multi-Operator has the least share in the market,about 12.6%.But it is estimated to register the highest CAGR, in terms of value, of the overall Soldering Fume Extractor market. The growth of the Multi-Operator segment is expected to continue during the forecast period due to the increasing demand for Soldering Fume Extractor.
9.8. Basis Point Share (BPS) Analysis by Type
9.9. Y-o-Y Growth Projections by Type
9.10. Market Attractiveness/Growth Potential Analysis
9.10.1. By Country
9.10.2. By Product Type
9.10.3. By Application
9.10.4. By Sales Channel
9.11. North America Soldering Fume Extractor Demand Share Forecast, 2019-2026
10. Latin America Soldering Fume Extractor Market Analysis and Forecast
10.1. Introduction
10.1.1. Basis Point Share (BPS) Analysis by Country
10.1.2. Y-o-Y Growth Projections by Country
10.1.3. Latin America Average Pricing Analysis
10.2. Latin America Soldering Fume Extractor Market Size and Volume Forecast by Country
10.2.1. Brazil
10.2.2. Mexico
10.2.3. Rest of Latin America
10.3. Absolute $ Opportunity Assessment by Country
10.4. Latin America Soldering Fume Extractor Market Size and Volume Forecast by Application
10.4.1. Electronics Industry
10.4.2. General Industry
10.5. Basis Point Share (BPS) Analysis by Application
10.6. Y-o-Y Growth Projections by Application
10.7. Latin America Soldering Fume Extractor Market Size and Volume Forecast by Type
10.7.1. Single Operator
10.7.2. Double Operator
10.7.3. Multi-Operator
10.7.4. In 2018?the Multi-Operator has the least share in the market,about 12.6%.But it is estimated to register the highest CAGR, in terms of value, of the overall Soldering Fume Extractor market. The growth of the Multi-Operator segment is expected to continue during the forecast period due to the increasing demand for Soldering Fume Extractor.
10.8. Basis Point Share (BPS) Analysis by Type
10.9. Y-o-Y Growth Projections by Type
10.10. Market Attractiveness/Growth Potential Analysis
10.10.1. By Country
10.10.2. By Product Type
10.10.3. By Application
10.10.4. By Sales Channel
10.11. Latin America Soldering Fume Extractor Demand Share Forecast, 2019-2026
11. Europe Soldering Fume Extractor Market Analysis and Forecast
11.1. Introduction
11.1.1. Basis Point Share (BPS) Analysis by Country
11.1.2. Y-o-Y Growth Projections by Country
11.1.3. Europe Average Pricing Analysis
11.2. Europe Soldering Fume Extractor Market Size and Volume Forecast by Country
11.2.1. Germany
11.2.2. France
11.2.3. Italy
11.2.4. U.K.
11.2.5. Spain
11.2.6. Russia
11.2.7. Rest of Europe
11.3. Absolute $ Opportunity Assessment by Country
11.4. Europe Soldering Fume Extractor Market Size and Volume Forecast by Application
11.4.1. Electronics Industry
11.4.2. General Industry
11.5. Basis Point Share (BPS) Analysis by Application
11.6. Y-o-Y Growth Projections by Application
11.7. Europe Soldering Fume Extractor Market Size and Volume Forecast by Type
11.7.1. Single Operator
11.7.2. Double Operator
11.7.3. Multi-Operator
11.7.4. In 218?the Multi-Operator has the least share in the market,about 12.6%.But it is estimated to register the highest CAGR, in terms of value, of the overall Soldering Fume Extractor market. The growth of the Multi-Operator segment is expected to continue during the forecast period due to the increasing demand for Soldering Fume Extractor.
11.8. Basis Point Share (BPS) Analysis by Type
11.9. Y-o-Y Growth Projections by Type
11.10. Market Attractiveness/Growth Potential Analysis
11.10.1. By Country
11.10.2. By Product Type
11.10.3. By Application
11.10.4. By Sales Channel
11.11. Europe Soldering Fume Extractor Demand Share, 2019-2026
12. Asia Pacific Soldering Fume Extractor Market Analysis and Forecast
12.1. Introduction
12.1.1. Basis Point Share (BPS) Analysis by Country
12.1.2. Y-o-Y Growth Projections by Country
12.1.3. Asia Pacific Average Pricing Analysis
12.2. Asia Pacific Soldering Fume Extractor Market Size and Volume Forecast by Country
12.2.1. China
12.2.2. Japan
12.2.3. South Korea
12.2.4. India
12.2.5. Australia
12.2.6. Rest of Asia Pacific (APAC)
12.3. Absolute $ Opportunity Assessment by Country
12.4. Asia Pacific Soldering Fume Extractor Market Size and Volume Forecast by Application
12.4.1. Electronics Industry
12.4.2. General Industry
12.5. Basis Point Share (BPS) Analysis by Application
12.6. Y-o-Y Growth Projections by Application
12.7. Asia Pacific Soldering Fume Extractor Market Size and Volume Forecast by Type
12.7.1. Single Operator
12.7.2. Double Operator
12.7.3. Multi-Operator
12.7.4. In 2018?the Multi-Operator has the least share in the market,about 12.6%.But it is estimated to register the highest CAGR, in terms of value, of the overall Soldering Fume Extractor market. The growth of the Multi-Operator segment is expected to continue during the forecast period due to the increasing demand for Soldering Fume Extractor.
12.8. Basis Point Share (BPS) Analysis by Type
12.9. Y-o-Y Growth Projections by Type
12.10. Market Attractiveness/Growth Potential Analysis
12.10.1. By Country
12.10.2. By Product Type
12.10.3. By Application
12.10.4. By Sales Channel
12.11. Asia Pacific Soldering Fume Extractor Demand Share, 2019-2026
13. Middle East & Africa Soldering Fume Extractor Market Analysis and Forecast
13.1. Introduction
13.1.1. Basis Point Share (BPS) Analysis by Country
13.1.2. Y-o-Y Growth Projections by Country
13.1.3. Asia Pacific Average Pricing Analysis
13.2. Middle East & Africa Soldering Fume Extractor Market Size and Volume Forecast by Country
13.2.1. Saudi Arabia
13.2.2. South Africa
13.2.3. UAE
13.2.4. Rest of Middle East & Africa (MEA)
13.3. Absolute $ Opportunity Assessment by Country
13.4. Middle East & Africa Soldering Fume Extractor Market Size and Volume Forecast by Application
13.4.1. Electronics Industry
13.4.2. General Industry
13.5. Basis Point Share (BPS) Analysis by Application
13.6. Y-o-Y Growth Projections by Application
13.7. Middle East & Africa Soldering Fume Extractor Market Size and Volume Forecast by Type
13.7.1. Single Operator
13.7.2. Double Operator
13.7.3. Multi-Operator
13.7.4. In 2018?the Multi-Operator has the least share in the market,about 12.6%.But it is estimated to register the highest CAGR, in terms of value, of the overall Soldering Fume Extractor market. The growth of the Multi-Operator segment is expected to continue during the forecast period due to the increasing demand for Soldering Fume Extractor.
13.8. Basis Point Share (BPS) Analysis by Type
13.9. Y-o-Y Growth Projections by Type
13.10. Market Attractiveness/Growth Potential Analysis
13.10.1. By Country
13.10.2. By Product Type
13.10.3. By Application
13.10.4. By Sales Channel
13.11. Middle East & Africa Soldering Fume Extractor Demand Share, 2019-2026
14. Competition Landscape
14.1. Global Soldering Fume Extractor Market: Market Share Analysis
14.2. Soldering Fume Extractor Distributors and Customers
14.3. Soldering Fume Extractor Market: Competitive Dashboard
14.4. Company Profiles (Details Overview, Financials, Developments, Strategy)
14.4.1. BOFA
14.4.1.1. Overview
14.4.1.2. Financials
14.4.1.3. Developments
14.4.1.4. Strategic Outlook
14.4.2. Metcal
14.4.2.1. Overview
14.4.2.2. Financials
14.4.2.3. Developments
14.4.2.4. Strategic Outlook
14.4.3. Weller
14.4.3.1. Overview
14.4.3.2. Financials
14.4.3.3. Developments
14.4.3.4. Strategic Outlook
14.4.4. Kurtz Ersa
14.4.4.1. Overview
14.4.4.2. Financials
14.4.4.3. Developments
14.4.4.4. Strategic Outlook
14.4.5. Hakko
14.4.5.1. Overview
14.4.5.2. Financials
14.4.5.3. Developments
14.4.5.4. Strategic Outlook
14.4.6. FUMEX
14.4.6.1. Overview
14.4.6.2. Financials
14.4.6.3. Developments
14.4.6.4. Strategic Outlook
14.4.7. ULT
14.4.7.1. Overview
14.4.7.2. Financials
14.4.7.3. Developments
14.4.7.4. Strategic Outlook
14.4.8. Quick
14.4.8.1. Overview
14.4.8.2. Financials
14.4.8.3. Developments
14.4.8.4. Strategic Outlook
14.4.9. Quatro-air
14.4.9.1. Overview
14.4.9.2. Financials
14.4.9.3. Developments
14.4.9.4. Strategic Outlook
14.4.10. Sentry Air Systems
14.4.10.1. Overview
14.4.10.2. Financials
14.4.10.3. Developments
14.4.10.4. Strategic Outlook
14.4.11. Sunyada
14.4.11.1. Overview
14.4.11.2. Financials
14.4.11.3. Developments
14.4.11.4. Strategic Outlook
14.4.12. Boorex
14.4.12.1. Overview
14.4.12.2. Financials
14.4.12.3. Developments
14.4.12.4. Strategic Outlook
14.4.13. Qubo
14.4.13.1. Overview
14.4.13.2. Financials
14.4.13.3. Developments
14.4.13.4. Strategic Outlook
14.4.14. Goodoop
14.4.14.1. Overview
14.4.14.2. Financials
14.4.14.3. Developments
14.4.14.4. Strategic Outlook
14.4.15. Conyson
14.4.15.1. Overview
14.4.15.2. Financials
14.4.15.3. Developments
14.4.15.4. Strategic Outlook
14.4.16. Pace
14.4.16.1. Overview
14.4.16.2. Financials
14.4.16.3. Developments
14.4.16.4. Strategic Outlook
14.4.17. COMPANY 17
14.4.17.1. Overview
14.4.17.2. Financials
14.4.17.3. Developments
14.4.17.4. Strategic Outlook
14.4.18. COMPANY 18
14.4.18.1. Overview
14.4.18.2. Financials
14.4.18.3. Developments
14.4.18.4. Strategic Outlook
14.4.19. COMPANY 19
14.4.19.1. Overview
14.4.19.2. Financials
14.4.19.3. Developments
&nbs
