Market Overview:
The global stainless steel washers market is expected to grow at a CAGR of 5.5% during the forecast period from 2018 to 2030. The market growth can be attributed to the increasing demand for stainless steel washers in various end-use industries, such as automotive, machinery & equipment, airplane, structural applications, and others. In terms of type, the OD below 1.0 in segment is expected to grow at a higher CAGR than other segments during the forecast period. This can be attributed to the growing demand for small-sized stainless steel washers in various end-use industries. In terms of application, the structural applications segment is projected to grow at a higher CAGR than other segments during the forecast period.
Product Definition:
A stainless steel washer is a disc with a hole in the middle that is used to distribute pressure, prevent leakage, and improve the stability of a fastener or joint. Stainless steel washers are important because they provide strength and stability to joints and fasteners, preventing leaks and improving performance.
ODBelow 1.0 in:
ODBelow 1.0 in, it's usage and growth factor in Stainless Steel Washers market is anticipated to grow at a CAGR of XX% from 2016 to 2024. ODBelow 1.0 in, it's the lowest form of lubrication maintenance products that are used for removing rust & corrosion from stainless steel washers or any other metal surface within an engine or machinery part.
OD 1.0-2.0 in:
OD 1.0-2.0 in is the measurement of internal thread of a ferrous component, which is important to know if the washer or any other part will fit into a certain machine or not. The measurement is taken at the center of the nut or bolt head where it would normally be installed in an assembly such as a fastener, hinge pin, gear tooth etc.
Application Insights:
The automotive application segment accounted for the largest volume share of over 30% in 2017. The use of washers in automobile manufacturing is anticipated to increase on account of their beneficial properties such as high strength and corrosion resistance. These werehers are used to protect against metal-to-metal contact, which leads to friction heat and wear generation, thereby increasing the life expectancy of automotive components.
The machinery & equipment application segment is expected to expand at a CAGR exceeding 4% from 2018 to 2030 owing to growing demand for stainless steel washers from various industries including oil & gas, chemical, food processing plants among others that require heavy duty applications. They are widely used in pumps where there is direct contact with hydraulic fluids or lubricants as they provide protection against galling wear caused by friction with moving parts within the machine or equipment assembly.
Regional Analysis:
Asia Pacific dominated the global stainless steel washers market in 2017 and is expected to continue its dominance over the forecast period. The region accounted for a share of more than 30% in terms of volume owing to high product demand from various end-use industries, such as automotive, machinery & equipment, aerospace and others. China is one of the largest producers and consumers of stainless steel washers across the globe.
The country has been witnessing rapid growth in automobile production which has led to an increase in automotive component manufacturing on a large scale across several countries including China, India, Japan and South Korea. This factor is anticipated to have a positive impact on industry growth over the next eight years due to rising product demand from these end-use sectors along with growing infrastructure activities supported by government investments at domestic levels.
Growth Factors:
- Increasing demand from end-use industries such as automotive, construction, and engineering
- Growing popularity of stainless steel washers in Asia Pacific region
- Rising investment by key players in research and development to develop new products
- Expansion of global production capacities by key manufacturers
- Emergence of online retailing as a preferred sales channel for consumers
Scope Of The Report
Report Attributes
Report Details
Report Title
Stainless Steel Washers Market Research Report
By Type
ODBelow 1.0 in, OD 1.0-2.0 in, ODAbove 2.0 in
By Application
Automotive, Machinery & Equipment, Airplane, Structural Applications, Other
By Companies
Phoenix Specialty Mfg. Co., Samir Steel Syndicate, Hodell-Natco, Disc-Lock, Te-Co, Tiger-Tight, Armor Coat, Accurate Mfd Products, Midwest Acorn Nut, Adapt-All
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
234
Number of Tables & Figures
164
Customization Available
Yes, the report can be customized as per your need.
Global Stainless Steel Washers Market Report Segments:
The global Stainless Steel Washers market is segmented on the basis of:
Types
ODBelow 1.0 in, OD 1.0-2.0 in, ODAbove 2.0 in
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Automotive, Machinery & Equipment, Airplane, Structural Applications, Other
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- Phoenix Specialty Mfg. Co.
- Samir Steel Syndicate
- Hodell-Natco
- Disc-Lock
- Te-Co
- Tiger-Tight
- Armor Coat
- Accurate Mfd Products
- Midwest Acorn Nut
- Adapt-All
Highlights of The Stainless Steel Washers Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- ODBelow 1.0 in
- OD 1.0-2.0 in
- ODAbove 2.0 in
- By Application:
- Automotive
- Machinery & Equipment
- Airplane
- Structural Applications
- Other
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Stainless Steel Washers Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
Stainless steel washers are a type of washer that is made from stainless steel. They are used to seal joints between different pieces of metal, and they can also be used as spacers.
Some of the major players in the stainless steel washers market are Phoenix Specialty Mfg. Co., Samir Steel Syndicate, Hodell-Natco, Disc-Lock, Te-Co, Tiger-Tight, Armor Coat, Accurate Mfd Products, Midwest Acorn Nut, Adapt-All.
The stainless steel washers market is expected to register a CAGR of 5.5%.
1. Executive Summary
2. Assumptions and Acronyms Used
3. Research Methodology
4. Stainless Steel Washers Market Overview
4.1. Introduction
4.1.1. Market Taxonomy
4.1.2. Market Definition
4.2. Macro-Economic Factors
4.2.1. Industry Outlook
4.3. Stainless Steel Washers Market Dynamics
4.3.1. Market Drivers
4.3.2. Market Restraints
4.3.3. Opportunity
4.3.4. Market Trends
4.4. Stainless Steel Washers Market - Supply Chain
4.5. Global Stainless Steel Washers Market Forecast
4.5.1. Stainless Steel Washers Market Size (US$ Mn) and Y-o-Y Growth
4.5.2. Stainless Steel Washers Market Size (000 Units) and Y-o-Y Growth
4.5.3. Stainless Steel Washers Market Absolute $ Opportunity
5. Global Stainless Steel Washers Market Analysis and Forecast by Type
5.1. Market Trends
5.2. Introduction
5.2.1. Basis Point Share (BPS) Analysis by Type
5.2.2. Y-o-Y Growth Projections by Type
5.3. Stainless Steel Washers Market Size and Volume Forecast by Type
5.3.1. ODBelow 1.0 in
5.3.2. OD 1.0-2.0 in
5.3.3. ODAbove 2.0 in
5.4. Absolute $ Opportunity Assessment by Type
5.5. Market Attractiveness/Growth Potential Analysis by Type
6. Global Stainless Steel Washers Market Analysis and Forecast by Application
6.1. Market Trends
6.2. Introduction
6.2.1. Basis Point Share (BPS) Analysis by Application
6.2.2. Y-o-Y Growth Projections by Application
6.3. Stainless Steel Washers Market Size and Volume Forecast by Application
6.3.1. Automotive
6.3.2. Machinery & Equipment
6.3.3. Airplane
6.3.4. Structural Applications
6.3.5. Other
6.4. Absolute $ Opportunity Assessment by Application
6.5. Market Attractiveness/Growth Potential Analysis by Application
7. Global Stainless Steel Washers Market Analysis and Forecast by Sales Channel
7.1. Market Trends
7.2. Introduction
7.2.1. Basis Point Share (BPS) Analysis by Sales Channel
7.2.2. Y-o-Y Growth Projections by Sales Channel
7.3. Stainless Steel Washers Market Size and Volume Forecast by Sales Channel
7.3.1. Manufacturer/Distributor/Service Provider
7.3.2. Aftermarket
7.4. Absolute $ Opportunity Assessment by Sales Channel
7.5. Market Attractiveness/Growth Potential Analysis by Sales Channel
8. Global Stainless Steel Washers Market Analysis and Forecast by Region
8.1. Market Trends
8.2. Introduction
8.2.1. Basis Point Share (BPS) Analysis by Region
8.2.2. Y-o-Y Growth Projections by Region
8.3. Stainless Steel Washers Market Size and Volume Forecast by Region
8.3.1. North America
8.3.2. Latin America
8.3.3. Europe
8.3.4. Asia Pacific
8.3.5. Middle East and Africa (MEA)
8.4. Absolute $ Opportunity Assessment by Region
8.5. Market Attractiveness/Growth Potential Analysis by Region
8.6. Global Stainless Steel Washers Demand Share Forecast, 2019-2026
9. North America Stainless Steel Washers Market Analysis and Forecast
9.1. Introduction
9.1.1. Basis Point Share (BPS) Analysis by Country
9.1.2. Y-o-Y Growth Projections by Country
9.2. North America Stainless Steel Washers Market Size and Volume Forecast by Country
9.2.1. U.S.
9.2.2. Canada
9.3. Absolute $ Opportunity Assessment by Country
9.4. North America Stainless Steel Washers Market Size and Volume Forecast by Application
9.4.1. Automotive
9.4.2. Machinery & Equipment
9.4.3. Airplane
9.4.4. Structural Applications
9.4.5. Other
9.5. Basis Point Share (BPS) Analysis by Application
9.6. Y-o-Y Growth Projections by Application
9.7. North America Stainless Steel Washers Market Size and Volume Forecast by Type
9.7.1. ODBelow 1.0 in
9.7.2. OD 1.0-2.0 in
9.7.3. ODAbove 2.0 in
9.8. Basis Point Share (BPS) Analysis by Type
9.9. Y-o-Y Growth Projections by Type
9.10. Market Attractiveness/Growth Potential Analysis
9.10.1. By Country
9.10.2. By Product Type
9.10.3. By Application
9.10.4. By Sales Channel
9.11. North America Stainless Steel Washers Demand Share Forecast, 2019-2026
10. Latin America Stainless Steel Washers Market Analysis and Forecast
10.1. Introduction
10.1.1. Basis Point Share (BPS) Analysis by Country
10.1.2. Y-o-Y Growth Projections by Country
10.1.3. Latin America Average Pricing Analysis
10.2. Latin America Stainless Steel Washers Market Size and Volume Forecast by Country
10.2.1. Brazil
10.2.2. Mexico
10.2.3. Rest of Latin America
10.3. Absolute $ Opportunity Assessment by Country
10.4. Latin America Stainless Steel Washers Market Size and Volume Forecast by Application
10.4.1. Automotive
10.4.2. Machinery & Equipment
10.4.3. Airplane
10.4.4. Structural Applications
10.4.5. Other
10.5. Basis Point Share (BPS) Analysis by Application
10.6. Y-o-Y Growth Projections by Application
10.7. Latin America Stainless Steel Washers Market Size and Volume Forecast by Type
10.7.1. ODBelow 1.0 in
10.7.2. OD 1.0-2.0 in
10.7.3. ODAbove 2.0 in
10.8. Basis Point Share (BPS) Analysis by Type
10.9. Y-o-Y Growth Projections by Type
10.10. Market Attractiveness/Growth Potential Analysis
10.10.1. By Country
10.10.2. By Product Type
10.10.3. By Application
10.10.4. By Sales Channel
10.11. Latin America Stainless Steel Washers Demand Share Forecast, 2019-2026
11. Europe Stainless Steel Washers Market Analysis and Forecast
11.1. Introduction
11.1.1. Basis Point Share (BPS) Analysis by Country
11.1.2. Y-o-Y Growth Projections by Country
11.1.3. Europe Average Pricing Analysis
11.2. Europe Stainless Steel Washers Market Size and Volume Forecast by Country
11.2.1. Germany
11.2.2. France
11.2.3. Italy
11.2.4. U.K.
11.2.5. Spain
11.2.6. Russia
11.2.7. Rest of Europe
11.3. Absolute $ Opportunity Assessment by Country
11.4. Europe Stainless Steel Washers Market Size and Volume Forecast by Application
11.4.1. Automotive
11.4.2. Machinery & Equipment
11.4.3. Airplane
11.4.4. Structural Applications
11.4.5. Other
11.5. Basis Point Share (BPS) Analysis by Application
11.6. Y-o-Y Growth Projections by Application
11.7. Europe Stainless Steel Washers Market Size and Volume Forecast by Type
11.7.1. ODBelow 1.0 in
11.7.2. OD 1.0-2.0 in
11.7.3. ODAbove 2.0 in
11.8. Basis Point Share (BPS) Analysis by Type
11.9. Y-o-Y Growth Projections by Type
11.10. Market Attractiveness/Growth Potential Analysis
11.10.1. By Country
11.10.2. By Product Type
11.10.3. By Application
11.10.4. By Sales Channel
11.11. Europe Stainless Steel Washers Demand Share, 2019-2026
12. Asia Pacific Stainless Steel Washers Market Analysis and Forecast
12.1. Introduction
12.1.1. Basis Point Share (BPS) Analysis by Country
12.1.2. Y-o-Y Growth Projections by Country
12.1.3. Asia Pacific Average Pricing Analysis
12.2. Asia Pacific Stainless Steel Washers Market Size and Volume Forecast by Country
12.2.1. China
12.2.2. Japan
12.2.3. South Korea
12.2.4. India
12.2.5. Australia
12.2.6. Rest of Asia Pacific (APAC)
12.3. Absolute $ Opportunity Assessment by Country
12.4. Asia Pacific Stainless Steel Washers Market Size and Volume Forecast by Application
12.4.1. Automotive
12.4.2. Machinery & Equipment
12.4.3. Airplane
12.4.4. Structural Applications
12.4.5. Other
12.5. Basis Point Share (BPS) Analysis by Application
12.6. Y-o-Y Growth Projections by Application
12.7. Asia Pacific Stainless Steel Washers Market Size and Volume Forecast by Type
12.7.1. ODBelow 1.0 in
12.7.2. OD 1.0-2.0 in
12.7.3. ODAbove 2.0 in
12.8. Basis Point Share (BPS) Analysis by Type
12.9. Y-o-Y Growth Projections by Type
12.10. Market Attractiveness/Growth Potential Analysis
12.10.1. By Country
12.10.2. By Product Type
12.10.3. By Application
12.10.4. By Sales Channel
12.11. Asia Pacific Stainless Steel Washers Demand Share, 2019-2026
13. Middle East & Africa Stainless Steel Washers Market Analysis and Forecast
13.1. Introduction
13.1.1. Basis Point Share (BPS) Analysis by Country
13.1.2. Y-o-Y Growth Projections by Country
13.1.3. Asia Pacific Average Pricing Analysis
13.2. Middle East & Africa Stainless Steel Washers Market Size and Volume Forecast by Country
13.2.1. Saudi Arabia
13.2.2. South Africa
13.2.3. UAE
13.2.4. Rest of Middle East & Africa (MEA)
13.3. Absolute $ Opportunity Assessment by Country
13.4. Middle East & Africa Stainless Steel Washers Market Size and Volume Forecast by Application
13.4.1. Automotive
13.4.2. Machinery & Equipment
13.4.3. Airplane
13.4.4. Structural Applications
13.4.5. Other
13.5. Basis Point Share (BPS) Analysis by Application
13.6. Y-o-Y Growth Projections by Application
13.7. Middle East & Africa Stainless Steel Washers Market Size and Volume Forecast by Type
13.7.1. ODBelow 1.0 in
13.7.2. OD 1.0-2.0 in
13.7.3. ODAbove 2.0 in
13.8. Basis Point Share (BPS) Analysis by Type
13.9. Y-o-Y Growth Projections by Type
13.10. Market Attractiveness/Growth Potential Analysis
13.10.1. By Country
13.10.2. By Product Type
13.10.3. By Application
13.10.4. By Sales Channel
13.11. Middle East & Africa Stainless Steel Washers Demand Share, 2019-2026
14. Competition Landscape
14.1. Global Stainless Steel Washers Market: Market Share Analysis
14.2. Stainless Steel Washers Distributors and Customers
14.3. Stainless Steel Washers Market: Competitive Dashboard
14.4. Company Profiles (Details Overview, Financials, Developments, Strategy)
14.4.1. Phoenix Specialty Mfg. Co.
14.4.1.1. Overview
14.4.1.2. Financials
14.4.1.3. Developments
14.4.1.4. Strategic Outlook
14.4.2. Samir Steel Syndicate
14.4.2.1. Overview
14.4.2.2. Financials
14.4.2.3. Developments
14.4.2.4. Strategic Outlook
14.4.3. Hodell-Natco
14.4.3.1. Overview
14.4.3.2. Financials
14.4.3.3. Developments
14.4.3.4. Strategic Outlook
14.4.4. Disc-Lock
14.4.4.1. Overview
14.4.4.2. Financials
14.4.4.3. Developments
14.4.4.4. Strategic Outlook
14.4.5. Te-Co
14.4.5.1. Overview
14.4.5.2. Financials
14.4.5.3. Developments
14.4.5.4. Strategic Outlook
14.4.6. Tiger-Tight
14.4.6.1. Overview
14.4.6.2. Financials
14.4.6.3. Developments
14.4.6.4. Strategic Outlook
14.4.7. Armor Coat
14.4.7.1. Overview
14.4.7.2. Financials
14.4.7.3. Developments
14.4.7.4. Strategic Outlook
14.4.8. Accurate Mfd Products
14.4.8.1. Overview
14.4.8.2. Financials
14.4.8.3. Developments
14.4.8.4. Strategic Outlook
14.4.9. Midwest Acorn Nut
14.4.9.1. Overview
14.4.9.2. Financials
14.4.9.3. Developments
14.4.9.4. Strategic Outlook
14.4.10. Adapt-All
14.4.10.1. Overview
14.4.10.2. Financials
14.4.10.3. Developments
14.4.10.4. Strategic Outlook
14.4.11. COMPANY 11
14.4.11.1. Overview
14.4.11.2. Financials
14.4.11.3. Developments
14.4.11.4. Strategic Outlook
14.4.12. COMPANY 12
14.4.12.1. Overview
14.4.12.2. Financials
14.4.12.3. Developments
14.4.12.4. Strategic Outlook
14.4.13. COMPANY 13
14.4.13.1. Overview
14.4.13.2. Financials
14.4.13.3. Developments
14.4.13.4. Strategic Outlook
14.4.14. COMPANY 14
14.4.14.1. Overview
14.4.14.2. Financials
14.4.14.3. Developments
14.4.14.4. Strategic Outlook
14.4.15. COMPANY 15
14.4.15.1. Overview
14.4.15.2. Financials
14.4.15.3. Developments
14.4.15.4. Strategic Outlook
14.4.16. COMPANY 16
14.4.16.1. Overview
14.4.16.2. Financials
14.4.16.3. Developments
14.4.16.4. Strategic Outlook
14.4.17. COMPANY 17
14.4.17.1. Overview
14.4.17.2. Financials
14.4.17.3. Developments
14.4.17.4. Strategic Outlook
14.4.18. COMPANY 18
14.4.18.1. Overview
14.4.18.2. Financials
14.4.18.3. Developments
14.4.18.4. Strategic Outlook
14.4.19. COMPANY 19
14.4.19.1. Overview
14.4.19.2. Financials
14.4.19.3. Developments
14.4.19.4. Strategic Outlook
14.4.20. COMPANY 20
14.4.20.1. Overview
14.4.20.2. Financials
14.4.20.3. Developments
14.4.20.4. Strategic Outlook