Market Overview:
Ultrasonic metal welding equipment is used to weld two pieces of metal together. The ultrasonic energy is focused on the joint between the two metals, and causes them to heat up and melt. The molten metal then flows together and cools, forming a welded joint. Ultrasonic welding is a relatively new technology that has been developed in the past few decades. It offers several advantages over traditional welding methods, including faster cycle times, lower costs, and higher quality joints. The global ultrasonic metal welding equipment market was valued at USD 1.02 billion in 2017.
Product Definition:
Ultrasonic metal welding equipment is a device that uses ultrasonic vibrations to weld two pieces of metal together. Ultrasonic vibrations are high-frequency sound waves that can cause materials to vibrate and heat up quickly. When these vibrations are directed at two pieces of metal, they create friction and heat between the metals. This heat causes the metals to melt and fuse together, forming a weld. Ultrasonic welding is often used in industrial applications because it is a quick, clean, and efficient way to join metals together.
Center Frequency 20KHz:
Center frequency is the most important factor in ultrasonic metal welding equipment. It has an immense impact on the quality of welds produced by a welder. The range of center frequencies depends on the type of work to be done by a welder and also depends upon his training and experience.
Center Frequency 24KHz:
Center frequency 24KHz is used in ultrasonic metal welding equipment to provide high-frequency vibrations that are essential for the Ultrasonic Metal Welding (UMW) process. Center frequency 24KHz is a very high audio frequency and can cause damage to human body if exposed for a long time. Therefore, it should be kept away from personnel and other sensitive areas during the manufacturing process of electronic devices or automotive components.
Application Insights:
The automotive and aerospace application segment accounted for the largest market share in 2017. The equipment is widely used in the production of automobiles, aircraft, ships, and boats. Ultrasonic welding is used to join various metallic materials such as aluminum alloys, magnesium alloys that are prone to corrosion when joined by other methods such as conventional welding or brazing.
The home electrical appliance segment is expected to grow at a significant rate over the forecast period owing to increasing demand for energy-efficient products with low power consumption levels coupled with rising environmental concerns regarding greenhouse gas emissions from vehicles has led manufacturers toward developing energy-efficient appliances that consume less power while delivering high performance standards.
Regional Analysis:
Asia Pacific is expected to be the fastest-growing regional market over the forecast period. The region’s growth can be attributed to increasing demand for high-quality metal products from developing countries, such as India and China. In addition, rising foreign investments in these countries are likely to boost product demand in various applications. For instance, General Electric has signed a deal with state-owned Power Grid Corporation of India Ltd (PGCIL) for selling its industrial gas turbines in PGCIL's upcoming power projects across the country.
North America accounted for a significant share of global revenue owing to early adoption of ultrasonic technology coupled with growing automotive production base mainly in U.S.
Growth Factors:
- Increasing demand for ultrasonic metal welding equipment from automotive and aerospace industries due to its advantages such as high welding speed, low heat input, and good weld quality.
- Growing demand for ultrasonic metal welding equipment in medical devices industry due to its ability to weld dissimilar materials without any filler material.
- Rising adoption of ultrasonic metal welding equipment in electrical and electronics industry due to its ability to join different types of metals quickly and easily.
- Increasing research and development activities by the key players for developing new ultrasonic metal welding technologies that can offer better performance than the existing ones.
- Growing popularity of ultrasonic metal bonding process over traditional soldering or brazing processes owing to its many advantages such as low cost, reduced assembly time, improved joint strength, etc
Scope Of The Report
Report Attributes
Report Details
Report Title
Ultrasonic Metal Welding Equipment Market Research Report
By Type
Center Frequency 20KHz, Center Frequency 24KHz, Center Frequency 40KHz, Others
By Application
Automotive and Aerospace, Home Electrical Appliances, Circuits and Electronic Components, Others
By Companies
Emerson, Sonics & Materials, Sonobond Ultrasonics, Griffin Automation, Nippon Avionics, Weber Ultrasonic, Schunk, Shallwin Power System, Forward Sonic Tech
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
233
Number of Tables & Figures
164
Customization Available
Yes, the report can be customized as per your need.
Global Ultrasonic Metal Welding Equipment Market Report Segments:
The global Ultrasonic Metal Welding Equipment market is segmented on the basis of:
Types
Center Frequency 20KHz, Center Frequency 24KHz, Center Frequency 40KHz, Others
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Automotive and Aerospace, Home Electrical Appliances, Circuits and Electronic Components, Others
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- Emerson
- Sonics & Materials
- Sonobond Ultrasonics
- Griffin Automation
- Nippon Avionics
- Weber Ultrasonic
- Schunk
- Shallwin Power System
- Forward Sonic Tech
Highlights of The Ultrasonic Metal Welding Equipment Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- Center Frequency 20KHz
- Center Frequency 24KHz
- Center Frequency 40KHz
- Others
- By Application:
- Automotive and Aerospace
- Home Electrical Appliances
- Circuits and Electronic Components
- Others
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Ultrasonic Metal Welding Equipment Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
Ultrasonic metal welding equipment is a type of welding equipment that uses high-frequency sound waves to create a weld. This process is often used to join metals that are too thin or too hard to be welded using other methods, such as arc welding.
Some of the major companies in the ultrasonic metal welding equipment market are Emerson, Sonics & Materials, Sonobond Ultrasonics, Griffin Automation, Nippon Avionics, Weber Ultrasonic, Schunk, Shallwin Power System, Forward Sonic Tech.
1. Executive Summary
2. Assumptions and Acronyms Used
3. Research Methodology
4. Ultrasonic Metal Welding Equipment Market Overview
4.1. Introduction
4.1.1. Market Taxonomy
4.1.2. Market Definition
4.2. Macro-Economic Factors
4.2.1. Industry Outlook
4.3. Ultrasonic Metal Welding Equipment Market Dynamics
4.3.1. Market Drivers
4.3.2. Market Restraints
4.3.3. Opportunity
4.3.4. Market Trends
4.4. Ultrasonic Metal Welding Equipment Market - Supply Chain
4.5. Global Ultrasonic Metal Welding Equipment Market Forecast
4.5.1. Ultrasonic Metal Welding Equipment Market Size (US$ Mn) and Y-o-Y Growth
4.5.2. Ultrasonic Metal Welding Equipment Market Size (000 Units) and Y-o-Y Growth
4.5.3. Ultrasonic Metal Welding Equipment Market Absolute $ Opportunity
5. Global Ultrasonic Metal Welding Equipment Market Analysis and Forecast by Type
5.1. Market Trends
5.2. Introduction
5.2.1. Basis Point Share (BPS) Analysis by Type
5.2.2. Y-o-Y Growth Projections by Type
5.3. Ultrasonic Metal Welding Equipment Market Size and Volume Forecast by Type
5.3.1. Center Frequency 20KHz
5.3.2. Center Frequency 24KHz
5.3.3. Center Frequency 40KHz
5.3.4. Others
5.4. Absolute $ Opportunity Assessment by Type
5.5. Market Attractiveness/Growth Potential Analysis by Type
6. Global Ultrasonic Metal Welding Equipment Market Analysis and Forecast by Application
6.1. Market Trends
6.2. Introduction
6.2.1. Basis Point Share (BPS) Analysis by Application
6.2.2. Y-o-Y Growth Projections by Application
6.3. Ultrasonic Metal Welding Equipment Market Size and Volume Forecast by Application
6.3.1. Automotive and Aerospace
6.3.2. Home Electrical Appliances
6.3.3. Circuits and Electronic Components
6.3.4. Others
6.4. Absolute $ Opportunity Assessment by Application
6.5. Market Attractiveness/Growth Potential Analysis by Application
7. Global Ultrasonic Metal Welding Equipment Market Analysis and Forecast by Sales Channel
7.1. Market Trends
7.2. Introduction
7.2.1. Basis Point Share (BPS) Analysis by Sales Channel
7.2.2. Y-o-Y Growth Projections by Sales Channel
7.3. Ultrasonic Metal Welding Equipment Market Size and Volume Forecast by Sales Channel
7.3.1. Manufacturer/Distributor/Service Provider
7.3.2. Aftermarket
7.4. Absolute $ Opportunity Assessment by Sales Channel
7.5. Market Attractiveness/Growth Potential Analysis by Sales Channel
8. Global Ultrasonic Metal Welding Equipment Market Analysis and Forecast by Region
8.1. Market Trends
8.2. Introduction
8.2.1. Basis Point Share (BPS) Analysis by Region
8.2.2. Y-o-Y Growth Projections by Region
8.3. Ultrasonic Metal Welding Equipment Market Size and Volume Forecast by Region
8.3.1. North America
8.3.2. Latin America
8.3.3. Europe
8.3.4. Asia Pacific
8.3.5. Middle East and Africa (MEA)
8.4. Absolute $ Opportunity Assessment by Region
8.5. Market Attractiveness/Growth Potential Analysis by Region
8.6. Global Ultrasonic Metal Welding Equipment Demand Share Forecast, 2019-2029
9. North America Ultrasonic Metal Welding Equipment Market Analysis and Forecast
9.1. Introduction
9.1.1. Basis Point Share (BPS) Analysis by Country
9.1.2. Y-o-Y Growth Projections by Country
9.2. North America Ultrasonic Metal Welding Equipment Market Size and Volume Forecast by Country
9.2.1. U.S.
9.2.2. Canada
9.3. Absolute $ Opportunity Assessment by Country
9.4. North America Ultrasonic Metal Welding Equipment Market Size and Volume Forecast by Application
9.4.1. Automotive and Aerospace
9.4.2. Home Electrical Appliances
9.4.3. Circuits and Electronic Components
9.4.4. Others
9.5. Basis Point Share (BPS) Analysis by Application
9.6. Y-o-Y Growth Projections by Application
9.7. North America Ultrasonic Metal Welding Equipment Market Size and Volume Forecast by Type
9.7.1. Center Frequency 20KHz
9.7.2. Center Frequency 24KHz
9.7.3. Center Frequency 40KHz
9.7.4. Others
9.8. Basis Point Share (BPS) Analysis by Type
9.9. Y-o-Y Growth Projections by Type
9.10. Market Attractiveness/Growth Potential Analysis
9.10.1. By Country
9.10.2. By Product Type
9.10.3. By Application
9.10.4. By Sales Channel
9.11. North America Ultrasonic Metal Welding Equipment Demand Share Forecast, 2019-2029
10. Latin America Ultrasonic Metal Welding Equipment Market Analysis and Forecast
10.1. Introduction
10.1.1. Basis Point Share (BPS) Analysis by Country
10.1.2. Y-o-Y Growth Projections by Country
10.1.3. Latin America Average Pricing Analysis
10.2. Latin America Ultrasonic Metal Welding Equipment Market Size and Volume Forecast by Country
10.2.1. Brazil
10.2.2. Mexico
10.2.3. Rest of Latin America
10.3. Absolute $ Opportunity Assessment by Country
10.4. Latin America Ultrasonic Metal Welding Equipment Market Size and Volume Forecast by Application
10.4.1. Automotive and Aerospace
10.4.2. Home Electrical Appliances
10.4.3. Circuits and Electronic Components
10.4.4. Others
10.5. Basis Point Share (BPS) Analysis by Application
10.6. Y-o-Y Growth Projections by Application
10.7. Latin America Ultrasonic Metal Welding Equipment Market Size and Volume Forecast by Type
10.7.1. Center Frequency 20KHz
10.7.2. Center Frequency 24KHz
10.7.3. Center Frequency 40KHz
10.7.4. Others
10.8. Basis Point Share (BPS) Analysis by Type
10.9. Y-o-Y Growth Projections by Type
10.10. Market Attractiveness/Growth Potential Analysis
10.10.1. By Country
10.10.2. By Product Type
10.10.3. By Application
10.10.4. By Sales Channel
10.11. Latin America Ultrasonic Metal Welding Equipment Demand Share Forecast, 2019-2029
11. Europe Ultrasonic Metal Welding Equipment Market Analysis and Forecast
11.1. Introduction
11.1.1. Basis Point Share (BPS) Analysis by Country
11.1.2. Y-o-Y Growth Projections by Country
11.1.3. Europe Average Pricing Analysis
11.2. Europe Ultrasonic Metal Welding Equipment Market Size and Volume Forecast by Country
11.2.1. Germany
11.2.2. France
11.2.3. Italy
11.2.4. U.K.
11.2.5. Spain
11.2.6. Russia
11.2.7. Rest of Europe
11.3. Absolute $ Opportunity Assessment by Country
11.4. Europe Ultrasonic Metal Welding Equipment Market Size and Volume Forecast by Application
11.4.1. Automotive and Aerospace
11.4.2. Home Electrical Appliances
11.4.3. Circuits and Electronic Components
11.4.4. Others
11.5. Basis Point Share (BPS) Analysis by Application
11.6. Y-o-Y Growth Projections by Application
11.7. Europe Ultrasonic Metal Welding Equipment Market Size and Volume Forecast by Tpe
11.7.1. Center Frequency 20KHz
11.7.2. Center Frequency 24KHz
11.7.3. Center Frequency 40KHz
11.7.4. Others
11.8. Basis Point Share (BPS) Analysis by Type
11.9. Y-o-Y Growth Projections by Type
11.10. Market Attractiveness/Growth Potential Analysis
11.10.1. By Country
11.10.2. By Product Type
11.10.3. By Application
11.10.4. By Sales Channel
11.11. Europe Ultrasonic Metal Welding Equipment Demand Share, 2019-2029
12. Asia Pacific Ultrasonic Metal Welding Equipment Market Analysis and Forecast
12.1. Introduction
12.1.1. Basis Point Share (BPS) Analysis by Country
12.1.2. Y-o-Y Growth Projections by Country
12.1.3. Asia Pacific Average Pricing Analysis
12.2. Asia Pacific Ultrasonic Metal Welding Equipment Market Size and Volume Forecast by Country
12.2.1. China
12.2.2. Japan
12.2.3. South Korea
12.2.4. India
12.2.5. Australia
12.2.6. Rest of Asia Pacific (APAC)
12.3. Absolute $ Opportunity Assessment by Country
12.4. Asia Pacific Ultrasonic Metal Welding Equipment Market Size and Volume Forecast by Application
12.4.1. Automotive and Aerospace
12.4.2. Home Electrical Appliances
12.4.3. Circuits and Electronic Components
12.4.4. Others
12.5. Basis Point Share (BPS) Analysis by Application
12.6. Y-o-Y Growth Projections by Application
12.7. Asia Pacific Ultrasonic Metal Welding Equipment Market Size and Volume Forecast by Type
12.7.1. Center Frequency 20KHz
12.7.2. Center Frequency 24KHz
12.7.3. Center Frequency 40KHz
12.7.4. Others
12.8. Basis Point Share (BPS) Analysis by Type
12.9. Y-o-Y Growth Projections by Type
12.10. Market Attractiveness/Growth Potential Analysis
12.10.1. By Country
12.10.2. By Product Type
12.10.3. By Application
12.10.4. By Sales Channel
12.11. Asia Pacific Ultrasonic Metal Welding Equipment Demand Share, 2019-2029
13. Middle East & Africa Ultrasonic Metal Welding Equipment Market Analysis and Forecast
13.1. Introduction
13.1.1. Basis Point Share (BPS) Analysis by Country
13.1.2. Y-o-Y Growth Projections by Country
13.1.3. Asia Pacific Average Pricing Analysis
13.2. Middle East & Africa Ultrasonic Metal Welding Equipment Market Size and Volume Forecast by Country
13.2.1. Saudi Arabia
13.2.2. South Africa
13.2.3. UAE
13.2.4. Rest of Middle East & Africa (MEA)
13.3. Absolute $ Opportunity Assessment by Country
13.4. Middle East & Africa Ultrasonic Metal Welding Equipment Market Size and Volume Forecast by Application
13.4.1. Automotive and Aerospace
13.4.2. Home Electrical Appliances
13.4.3. Circuits and Electronic Components
13.4.4. Others
13.5. Basis Point Share (BPS) Analysis by Application
13.6. Y-o-Y Growth Projections by Application
13.7. Middle East & Africa Ultrasonic Metal Welding Equipment Market Size and Volume Forecast by Type
13.7.1. Center Frequency 20KHz
13.7.2. Center Frequency 24KHz
13.7.3. Center Frequency 40KHz
13.7.4. Others
13.8. Basis Point Share (BPS) Analysis by Type
13.9. Y-o-Y Growth Projections by Type
13.10. Market Attractiveness/Growth Potential Analysis
13.10.1. By Country
13.10.2. By Product Type
13.10.3. By Application
13.10.4. By Sales Channel
13.11. Middle East & Africa Ultrasonic Metal Welding Equipment Demand Share, 2019-2029
14. Competition Landscape
14.1. Global Ultrasonic Metal Welding Equipment Market: Market Share Analysis
14.2. Ultrasonic Metal Welding Equipment Distributors and Customers
14.3. Ultrasonic Metal Welding Equipment Market: Competitive Dashboard
14.4. Company Profiles (Details Overview, Financials, Developments, Strategy)
14.4.1. Emerson
14.4.1.1. Overview
14.4.1.2. Financials
14.4.1.3. Developments
14.4.1.4. Strategic Outlook
14.4.2. Sonics & Materials
14.4.2.1. Overview
14.4.2.2. Financials
14.4.2.3. Developments
14.4.2.4. Strategic Outlook
14.4.3. Sonobond Ultrasonics
14.4.3.1. Overview
14.4.3.2. Financials
14.4.3.3. Developments
14.4.3.4. Strategic Outlook
14.4.4. Griffin Automation
14.4.4.1. Overview
14.4.4.2. Financials
14.4.4.3. Developments
14.4.4.4. Strategic Outlook
14.4.5. Nippon Avionics
14.4.5.1. Overview
14.4.5.2. Financials
14.4.5.3. Developments
14.4.5.4. Strategic Outlook
14.4.6. Weber Ultrasonic
14.4.6.1. Overview
14.4.6.2. Financials
14.4.6.3. Developments
14.4.6.4. Strategic Outlook
14.4.7. Schunk
14.4.7.1. Overview
14.4.7.2. Financials
14.4.7.3. Developments
14.4.7.4. Strategic Outlook
14.4.8. Shallwin Power System
14.4.8.1. Overview
14.4.8.2. Financials
14.4.8.3. Developments
14.4.8.4. Strategic Outlook
14.4.9. Forward Sonic Tech
14.4.9.1. Overview
14.4.9.2. Financials
14.4.9.3. Developments
14.4.9.4. Strategic Outlook
14.4.10. COMPANY 10
14.4.10.1. Overview
14.4.10.2. Financials
14.4.10.3. Developments
14.4.10.4. Strategic Outlook
14.4.11. COMPANY 11
14.4.11.1. Overview
14.4.11.2. Financials
14.4.11.3. Developments
14.4.11.4. Strategic Outlook
14.4.12. COMPANY 12
14.4.12.1. Overview
14.4.12.2. Financials
14.4.12.3. Developments
14.4.12.4. Strategic Outlook
14.4.13. COMPANY 13
14.4.13.1. Overview
14.4.13.2. Financials
14.4.13.3. Developments
14.4.13.4. Strategic Outlook
14.4.14. COMPANY 14
14.4.14.1. Overview
14.4.14.2. Financials
14.4.14.3. Developments
14.4.14.4. Strategic Outlook
14.4.15. COMPANY 15
14.4.15.1. Overview
14.4.15.2. Financials
14.4.15.3. Developments
14.4.15.4. Strategic Outlook
14.4.16. COMPANY 16
14.4.16.1. Overview
14.4.16.2. Financials
14.4.16.3. Developments
14.4.16.4. Strategic Outlook
14.4.17. COMPANY 17
14.4.17.1. Overview
14.4.17.2. Financials
14.4.17.3. Developments
14.4.17.4. Strategic Outlook
14.4.18. COMPANY 18
14.4.18.1. Overview
14.4.18.2. Financials
14.4.18.3. Developments
14.4.18.4. Strategic Outlook
14.4.19. COMPANY 19
14.4.19.1. Overview
14.4.19.2. Financials
14.4.19.3. Developments
14.4.19.4. Strategic Outlook
14.4.20. COMPANY 20
14.4.20.1. Overview
14.4.20.2. Financials
14.4.20.3. Developments
14.4.20.4. Strategic Outlook
