Market Overview:
The Global Contract Plasma Coating Market is expected to grow at a CAGR of 6.5% during the forecast period from 2018 to 2030. The market growth can be attributed to the increasing demand for plasma coatings in various end-use industries such as aerospace, medical, chemical industry, and others. In addition, the growing demand for vacuum plasma spraying (VPS), water stabilized plasma spraying (WSP), and gas stabilized plasma spraying (GSP) are also contributing to the growth of this market. However, volatility in raw material prices may restrain the market growth during the forecast period.
Product Definition:
A plasma coating is a type of thin film coating that is applied to a surface using a plasma jet. The plasma jet heats the material to its boiling point, causing it to vaporize. The vaporized material is then deposited on the surface of the object that is being coated. Plasma coatings are used for a variety of applications, including corrosion protection, wear resistance, and thermal insulation.
Vacuum Plasma Spraying:
Vacuum plasma spraying (VPP) is a technique used to deposit a thin film of metal on any surface. The process utilizes high-frequency electric current and vacuum ultraviolet rays to produce an aerosol of metallic nanoparticles which are then applied using a spray can or spay gun onto the target object. VPP offers several advantages over other deposition techniques including lower operating costs, higher productivity, and ease in coating complex surfaces.
Water Stabilized Plasma Spraying:
Water stabilized plasma spraying is a method of applying a protective coating to various substrates by using water as the binder or carrier medium. The process takes place in two phases, namely phase change and thermal shock. Phase change takes place when the temperature of water changes causing rapid vaporization and condensation resulting in coating deposition on the substrate.
Application Insights:
The aerospace application segment led the global contract plasma coating market in 2017 and is projected to expand at a CAGR of XX% from 2018 to 2030. The growth can be attributed to increasing use of these coatings in aircraft interiors as they offer superior resistance against extreme temperatures, humidity and pressure. In addition, these coatings reduce the maintenance cost by reducing the accumulation of dirt on aircraft surfaces.
Medical was another prominent segment that accounted for a significant market share in 2017 owing to rising demand for advanced medical equipment and devices across various end-use industries including healthcare, life sciences & pharmaceuticals research laboratories, clinical testing centers and manufacturing facilities.
Regional Analysis:
Asia Pacific is expected to be the fastest-growing regional market with a CAGR of XX% from 2018 to 2030 owing to increasing foreign investments in the manufacturing sector coupled with rising demand for industrial equipment and components in this region. In addition, growing medical industry coupled with increasing use of surgical tools & instruments is anticipated to drive product demand over the forecast period.
Europe was valued at USD X million in 2017 and is projected to witness steady growth over the forecast period on account of high aerospace production due to presence of major aircraft manufacturers such as Airbus S.A., Rolls-Royce Group, Goodrich Corp., United Technologies Electronic Systems, Inc., etc.; rapid expansion & modernization program undertaken by chemical companies including BASF SE; Bayer AG; Merck KGaA; Hoechst AG; AstraZeneca AB among others are likely boost regional market growth during the forecast period.
Growth Factors:
- Increasing demand for plasma coatings in the automotive and aerospace industries due to their superior properties such as corrosion resistance, wear resistance, and thermal stability.
- Growing popularity of nanocoating technologies that offer better performance than traditional coatings.
- Rising demand from emerging economies such as China and India due to the increasing industrialization and urbanization in these countries.
- Increasing use of plasma coatings in medical devices and implants to improve their biocompatibility properties.
Scope Of The Report
Report Attributes
Report Details
Report Title
Contract Plasma Coating Market Research Report
By Type
Vacuum Plasma Spraying, Water Stabilized Plasma Spraying, Gas Stabilized Plasma Spraying
By Application
Aerospace, Medical, Chemical Industry, Others
By Companies
Plasma Etch, Inc., Henniker Plasma, Diener Plasma, SteriPackGroup, Krayden Inc., PVA TePla America, Folex, CPI, AST Products, Inc., Plasma Process, Curtiss-Wright Surface Technologies, Praxair Surface Technologies, Bodycote, Associated Wear Coatings Inc.
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
188
Number of Tables & Figures
132
Customization Available
Yes, the report can be customized as per your need.
Global Contract Plasma Coating Market Report Segments:
The global Contract Plasma Coating market is segmented on the basis of:
Types
Vacuum Plasma Spraying, Water Stabilized Plasma Spraying, Gas Stabilized Plasma Spraying
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Aerospace, Medical, Chemical Industry, Others
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- Plasma Etch, Inc.
- Henniker Plasma
- Diener Plasma
- SteriPackGroup
- Krayden Inc.
- PVA TePla America
- Folex
- CPI
- AST Products, Inc.
- Plasma Process
- Curtiss-Wright Surface Technologies
- Praxair Surface Technologies
- Bodycote
- Associated Wear Coatings Inc.
Highlights of The Contract Plasma Coating Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- Vacuum Plasma Spraying
- Water Stabilized Plasma Spraying
- Gas Stabilized Plasma Spraying
- By Application:
- Aerospace
- Medical
- Chemical Industry
- Others
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Contract Plasma Coating Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
Contract Plasma Coating is a process that uses a plasma torch to apply a thin, uniform coating of metal onto an object. The coating is made up of tiny particles that are heated to extremely high temperatures until they break down into their elemental parts. This creates a layer of metal that is very thin and uniform.
Some of the major companies in the contract plasma coating market are Plasma Etch, Inc., Henniker Plasma, Diener Plasma, SteriPackGroup, Krayden Inc., PVA TePla America, Folex, CPI, AST Products, Inc., Plasma Process, Curtiss-Wright Surface Technologies, Praxair Surface Technologies, Bodycote, Associated Wear Coatings Inc..
The contract plasma coating market is expected to register a CAGR of 6.5%.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Contract Plasma Coating Market Overview 4.1 Introduction 4.1.1 Market Taxonomy 4.1.2 Market Definition 4.1.3 Macro-Economic Factors Impacting the Market Growth 4.2 Contract Plasma Coating Market Dynamics 4.2.1 Market Drivers 4.2.2 Market Restraints 4.2.3 Market Opportunity 4.3 Contract Plasma Coating Market - Supply Chain Analysis 4.3.1 List of Key Suppliers 4.3.2 List of Key Distributors 4.3.3 List of Key Consumers 4.4 Key Forces Shaping the Contract Plasma Coating Market 4.4.1 Bargaining Power of Suppliers 4.4.2 Bargaining Power of Buyers 4.4.3 Threat of Substitution 4.4.4 Threat of New Entrants 4.4.5 Competitive Rivalry 4.5 Global Contract Plasma Coating Market Size & Forecast, 2020-2028 4.5.1 Contract Plasma Coating Market Size and Y-o-Y Growth 4.5.2 Contract Plasma Coating Market Absolute $ Opportunity
Chapter 5 Global Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Market Size Forecast by Type
5.2.1 Vacuum Plasma Spraying
5.2.2 Water Stabilized Plasma Spraying
5.2.3 Gas Stabilized Plasma Spraying
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Market Size Forecast by Applications
6.2.1 Aerospace
6.2.2 Medical
6.2.3 Chemical Industry
6.2.4 Others
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Contract Plasma Coating Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Contract Plasma Coating Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Analysis and Forecast
9.1 Introduction
9.2 North America Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Market Size Forecast by Type
9.6.1 Vacuum Plasma Spraying
9.6.2 Water Stabilized Plasma Spraying
9.6.3 Gas Stabilized Plasma Spraying
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Market Size Forecast by Applications
9.10.1 Aerospace
9.10.2 Medical
9.10.3 Chemical Industry
9.10.4 Others
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Analysis and Forecast
10.1 Introduction
10.2 Europe Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Market Size Forecast by Type
10.6.1 Vacuum Plasma Spraying
10.6.2 Water Stabilized Plasma Spraying
10.6.3 Gas Stabilized Plasma Spraying
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Market Size Forecast by Applications
10.10.1 Aerospace
10.10.2 Medical
10.10.3 Chemical Industry
10.10.4 Others
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Market Size Forecast by Type
11.6.1 Vacuum Plasma Spraying
11.6.2 Water Stabilized Plasma Spraying
11.6.3 Gas Stabilized Plasma Spraying
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Market Size Forecast by Applications
11.10.1 Aerospace
11.10.2 Medical
11.10.3 Chemical Industry
11.10.4 Others
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Analysis and Forecast
12.1 Introduction
12.2 Latin America Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Market Size Forecast by Type
12.6.1 Vacuum Plasma Spraying
12.6.2 Water Stabilized Plasma Spraying
12.6.3 Gas Stabilized Plasma Spraying
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Market Size Forecast by Applications
12.10.1 Aerospace
12.10.2 Medical
12.10.3 Chemical Industry
12.10.4 Others
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Market Size Forecast by Type
13.6.1 Vacuum Plasma Spraying
13.6.2 Water Stabilized Plasma Spraying
13.6.3 Gas Stabilized Plasma Spraying
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Market Size Forecast by Applications
13.10.1 Aerospace
13.10.2 Medical
13.10.3 Chemical Industry
13.10.4 Others
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Contract Plasma Coating Market: Competitive Dashboard
14.2 Global Contract Plasma Coating Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 Plasma Etch, Inc.
14.3.2 Henniker Plasma
14.3.3 Diener Plasma
14.3.4 SteriPackGroup
14.3.5 Krayden Inc.
14.3.6 PVA TePla America
14.3.7 Folex
14.3.8 CPI
14.3.9 AST Products, Inc.
14.3.10 Plasma Process
14.3.11 Curtiss-Wright Surface Technologies
14.3.12 Praxair Surface Technologies
14.3.13 Bodycote
14.3.14 Associated Wear Coatings Inc.