Market Overview:
The global AlN fillers market is expected to grow at a CAGR of 6.5% during the forecast period from 2018 to 2030. The growth in this market can be attributed to the increasing demand for AlN fillers in various applications, such as laminated board, thermal interface materials (TIMs), and others. In terms of volume, the North America region is expected to lead the global AlN fillers market during the forecast period.
Product Definition:
AlN fillers are a type of ceramic filler material that is used to improve the performance and properties of composites. They are typically made from aluminum nitride, and can be used to improve the strength, stiffness, thermal conductivity, and wear resistance of composites.
5 μm:
5 μm is the most preferred fiber for AlN epoxy nanofillers. It has a high refractive index and low Abbe's number, which makes it suitable to be used as an optical fiber in light guide applications. The 5-10% of volume addition of this product into composites can significantly improve its mechanical properties such as stiffness and strength. This trend is expected to boost the growth factor over the forecast period.
10 μm:
10 μm is the most preferred particle size in AlN film fillers market. It has a wide range of applications and it can be used as an additive or filler in any material. The particles are small enough to ensure uniformity and stability during processing but large enough to offer high thermal conductivity, low density, and specific surface area among other properties.
The global 10-μm market was valued at USD 536 million in 2018.
Application Insights:
Laminated board was the largest application segment in 2017 and is projected to continue its dominance over the forecast period. AlN laminates are used as a substitute for lead in laminated boards due to their superior properties, such as low level of impurities, high strength-to-weight ratio and good thermal conductivity. These factors are likely to drive product demand from laminated board applications over the coming years.
AlN fillers have excellent resistance against acids, alkalis and solvents which makes them suitable for use in TIMs that operate at extreme temperatures (up to 300°C). The growing electronics industry is expected to be a key driver for aln filler consumption in thermal interface materials application segment over the forecast period. Other promising applications include power distribution boards & sockets, electronic components & PCB assembly etc., which can be found across various end-use industries including automotive/transportation equipment manufacturing and consumer electronics segments among others.
Regional Analysis:
Asia Pacific dominated the global market in 2017 and is expected to continue its dominance over the forecast period. The growth of this region can be attributed to rising demand for laminates, TIMs, and other applications from developing countries such as China and India. In addition, increasing automotive production in these regions is also anticipated to drive product demand further.
The growing construction industry coupled with rapidly expanding automotive sector in Asia Pacific is likely to boost alN-based product consumption across this region over the forecast period. North America emerged as a prominent consumer due to high automobile production levels coupled with stringent regulations regarding fuel economy of vehicles; both domestic & imported ones.
Europe was another key consumer of global fillers market owing their large composites industry base that consumes TIMs made up of glass fiber reinforced plastics (FRP).
Growth Factors:
- Increasing demand for aluminum nitride in semiconductor and LED industries due to its superior thermal conductivity and electrical properties.
- Rising demand for AlN fillers from the automotive industry due to their ability to improve fuel efficiency and reduce emissions.
- Growing use of AlN fillers in medical implants and prosthetics owing to their biocompatibility properties.
- Increasing application of AlN fillers in aerospace industry due to their lightweight nature and high strength-to-weight ratio .
Scope Of The Report
Report Attributes
Report Details
Report Title
AlN Fillers Market Research Report
By Type
5 μm, 10 μm, 20 μm, 50 μm, 100 μm
By Application
Laminated Board, Thermal Interface Materials (TIMs), Others
By Companies
Maruwa, Tokuyama, H.C. Starck, Toyo Aluminium K.K., GlobalTop Technology, Maruwa
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
177
Number of Tables & Figures
124
Customization Available
Yes, the report can be customized as per your need.
Global AlN Fillers Market Report Segments:
The global AlN Fillers market is segmented on the basis of:
Types
5 μm, 10 μm, 20 μm, 50 μm, 100 μm
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Laminated Board, Thermal Interface Materials (TIMs), Others
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- Maruwa
- Tokuyama
- H.C. Starck
- Toyo Aluminium K.K.
- GlobalTop Technology
- Maruwa
Highlights of The AlN Fillers Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- 5 μm
- 10 μm
- 20 μm
- 50 μm
- 100 μm
- By Application:
- Laminated Board
- Thermal Interface Materials (TIMs)
- Others
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the AlN Fillers Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
AlN fillers are a type of medical filler that is used to improve the appearance of facial wrinkles and folds. AlN fillers are made from aluminum and nitrogen, which allow them to be injected into the skin without causing any pain or discomfort.
Some of the major players in the aln fillers market are Maruwa, Tokuyama, H.C. Starck, Toyo Aluminium K.K., GlobalTop Technology, Maruwa.
The aln fillers market is expected to grow at a compound annual growth rate of 6.5%.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 AlN Fillers Market Overview 4.1 Introduction 4.1.1 Market Taxonomy 4.1.2 Market Definition 4.1.3 Macro-Economic Factors Impacting the Market Growth 4.2 AlN Fillers Market Dynamics 4.2.1 Market Drivers 4.2.2 Market Restraints 4.2.3 Market Opportunity 4.3 AlN Fillers Market - Supply Chain Analysis 4.3.1 List of Key Suppliers 4.3.2 List of Key Distributors 4.3.3 List of Key Consumers 4.4 Key Forces Shaping the AlN Fillers Market 4.4.1 Bargaining Power of Suppliers 4.4.2 Bargaining Power of Buyers 4.4.3 Threat of Substitution 4.4.4 Threat of New Entrants 4.4.5 Competitive Rivalry 4.5 Global AlN Fillers Market Size & Forecast, 2020-2028 4.5.1 AlN Fillers Market Size and Y-o-Y Growth 4.5.2 AlN Fillers Market Absolute $ Opportunity
Chapter 5 Global Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Market Size Forecast by Type
5.2.1 5 μm
5.2.2 10 μm
5.2.3 20 μm
5.2.4 50 μm
5.2.5 100 μm
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Market Size Forecast by Applications
6.2.1 Laminated Board
6.2.2 Thermal Interface Materials (TIMs)
6.2.3 Others
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global AlN Fillers Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 AlN Fillers Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Analysis and Forecast
9.1 Introduction
9.2 North America Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Market Size Forecast by Type
9.6.1 5 μm
9.6.2 10 μm
9.6.3 20 μm
9.6.4 50 μm
9.6.5 100 μm
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Market Size Forecast by Applications
9.10.1 Laminated Board
9.10.2 Thermal Interface Materials (TIMs)
9.10.3 Others
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Analysis and Forecast
10.1 Introduction
10.2 Europe Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Market Size Forecast by Type
10.6.1 5 μm
10.6.2 10 μm
10.6.3 20 μm
10.6.4 50 μm
10.6.5 100 μm
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Market Size Forecast by Applications
10.10.1 Laminated Board
10.10.2 Thermal Interface Materials (TIMs)
10.10.3 Others
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Market Size Forecast by Type
11.6.1 5 μm
11.6.2 10 μm
11.6.3 20 μm
11.6.4 50 μm
11.6.5 100 μm
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Market Size Forecast by Applications
11.10.1 Laminated Board
11.10.2 Thermal Interface Materials (TIMs)
11.10.3 Others
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Analysis and Forecast
12.1 Introduction
12.2 Latin America Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Market Size Forecast by Type
12.6.1 5 μm
12.6.2 10 μm
12.6.3 20 μm
12.6.4 50 μm
12.6.5 100 μm
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Market Size Forecast by Applications
12.10.1 Laminated Board
12.10.2 Thermal Interface Materials (TIMs)
12.10.3 Others
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Market Size Forecast by Type
13.6.1 5 μm
13.6.2 10 μm
13.6.3 20 μm
13.6.4 50 μm
13.6.5 100 μm
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Market Size Forecast by Applications
13.10.1 Laminated Board
13.10.2 Thermal Interface Materials (TIMs)
13.10.3 Others
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 AlN Fillers Market: Competitive Dashboard
14.2 Global AlN Fillers Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 Maruwa
14.3.2 Tokuyama
14.3.3 H.C. Starck
14.3.4 Toyo Aluminium K.K.
14.3.5 GlobalTop Technology
14.3.6 Maruwa